Blocks(块)：此元素用于在图形模型构建器(GMB)中建立模型。SMOCPro库的块是最常使用的只读权限块目录。
Build(建立)： SMOCPro设计控制器预处理以建立控制准则和其它模型的行为。所计算的数据存储在工作区文件中。
Calculated Value(计算值)：SMOCPro中的CV计算值。有趣的是当CV是线性组合变量时，其可以是一个位号或一个值。
Coefficient(系数)（经济函数）：经济函数系数是可在线修改的经济函数参数（EXASMOC：经济系数）。
Compaction Point(压实点)：在SMOCPro计算控制器行为时预定义的未来点。这些点是在控制器设计时指定的。
必须为输入和输出指定压实点，且其可以选择不相同的压实点。
Compile(编译)：验证和处理（图形）过程模型用于应用的动作。
Constraint(约束)：操作变量的限制。此限制可以是最小或最大限制值，也可以是最大动作限制。
Control Period(控制周期)：子控制器执行的频率。其可以根据模型(或工作区)周期的整数倍来定义。
Control Status(控制状态)（实际）：由SMOCPro计算的控制器实际状态。它表示控制器实际控制状态。实际控制状态可以是Standby(挂起)，Control(控制)或Optimize(优化)。
Control Status(控制状态)（期望）：控制器所需状态是由操作员设定以触发SMOCPro行为的。所需控制状态可以是Standby(挂起)，Control(控制)或Optimize(优化)。
Controlled Variable(被控变量)（CV）：受SMOCPro控制的过程输出变量和操作变量的线性组合。
Controller(控制器)（主）：控制器基于包含MV，DV和POVs的过程模型。其可以包含多个子控制器和经济函数。它在模型（或工作区）周期时执行。在控制器层面执行的主要功能是稳态可行性检查和优化。
Damping Factor(阻尼因子)：此参数定义了操作变量(MV)权重的重要性。阻尼因子越大，MV动作越平滑。
DCS：集散控制系统。
Debug Sample(调试样本)：调试文件生成的周期数。
Deviation Factor(偏差因子)：此参数定义了被控变量权重的重要性(EXASMOC: CV偏差)。偏差因子越小，控制越严格。CV weight(权重)是CV deviation(偏差)的倒数。
原文：
Blocks：Elements used for building models in the Graphical Model Builder (GMB). The SMOCPro library of blocks is a catalogue of the most often used blocks with read-only access.
Build：The action of pre-processing SMOCPro-designed controllers to build the control criterion and other matrices. The computed data are stored in workspace files.
Calculated Value：The value of the CV calculated SMOCPro. Interesting when a CV is a linear combinations of variables. It can be a TAG or a value.
Coefficient (economic function)：The economic function coefficients are economic function parameters that can be modified online. (EXASMOC:Economic Coefficients.)
Compaction Point：The predefined future points at which SMOCPro calculates the controller action. These points are specified in the controller design.
Compaction points must be specified for the inputs and outputs and can be selected differently.
Compile：The action of validating and processing a (graphical) process model to be used with the application.
Constraint：A limitation on a manipulated variable. This limitation can be a minimum or maximum limit value, or a maximum move.
Control Period：The frequency at which the sub-controller is executed. It is defined in multiples of the model (or workspace) period.
Control Status (Actual)：The controller actual status is calculated by SMOCPro. It indicates the effective controller status. The actual control status can be Standby, Control or Optimize.
Control Status (Desired)：The controller desired status is set by the operator to trigger SMOCPro behavior. The desired control status can be Standby, Control or Optimize.
Controlled Variable (CV)：Linear combination of process output variables and manipulated variables subject to SMOCPro control.
Controller (Main)：A Controller is based on a process model with MV, DV and POVs. It can haven have multiple sub-controllers and economic functions. It is executed at the model (or workspace) period. The main functions executed at the controllers level are steady state feasibility check and optimization.
Damping Factor：Parameter that defines the importance of a manipulated variable (MV) weight. The larger the damping factor, the smoother the MV moves.
DCS：Distributed control system.
Debug Sample ：The number of periods during which the debug file is generated.
Deviation Factor：Parameter that defines the importance of a controlled variable weight. (EXASMOC: CV Deviation.) The smaller the deviation factor, the tighter the control. The CV weight is the inverse of the CV deviation.
2016.7.9
网友评论