美文网首页
克隆虚拟机网卡无法启动

克隆虚拟机网卡无法启动

作者: G_慧慧 | 来源:发表于2019-01-15 20:23 被阅读0次

    静态IP和子网掩码的查看

    点击Edit-Virtual Network Editor

    image

    点击DHCP Settings

    image

    静态IP 是在192.168.230.128-192.168.230.254之间的一个

    image

    注意,有时候会出现以下情况

    image

    这是VM克隆系统的时候出现的错误

    解决办法:
    首先,打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示:

    # vi /etc/udev/rules.d/70-persistent-net.rules
    # This file was automatically generated by the /lib/udev/write_net_rules
    # program, run by the persistent-net-generator.rules rules file.
    #
    # You can modify it, as long as you keep each rule on a single
    # line, and change only the value of the NAME= key.
    # PCI device 0x1022:0x2000 (pcnet32)
    SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9
    7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
    # PCI device 0x1022:0x2000 (pcnet32)
    SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:1
    7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
    

    记录下,eth1网卡的mac地址00:0c:29:50:bd:17
    接下来,打开/etc/sysconfig/network-scripts/ifcfg-eth0
    vi /etc/sysconfig/network-scripts/ifcfg-eth0
    将 DEVICE="eth0" 改成 DEVICE="eth1" ,
    将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址 HWADDR="00:0c:29:50:bd:17"
    最后,重启网络
    service network restart

    相关文章

      网友评论

          本文标题:克隆虚拟机网卡无法启动

          本文链接:https://www.haomeiwen.com/subject/aqludqtx.html