入门
@Override
public Object getBean(String name, Object... args) throws BeansException {
return doGetBean(name, null, args, false);
}
doGetBean的大概功能如下:
1,提取对应的BeanName
2,检查缓存或者实例工厂的是否有对应的实例
创建bean的时候会有依赖注入的情况,这种情况下为了避免循环依赖,Spring加载的原则是不能bean加载完成,就将bean对应的ObjectFactory放入到缓存中
(提前曝光)
直接尝试从ObjectFactory中获取
3,返回定义的实例,有时候并不是返回实例本身,而是返回指定方法的返回的实例
4,如果已经加载的类不包括BeanName,尝试从父工厂中检测
......
下面是详细介绍
1.转换beanName
2.尝试从缓存中加载单例
3.bean的实例化
4.原型模式的依赖检查
5.检测parentBeanFactory
...
1 FactoryBean的使用
Spring通过反射机制利用bean的class属性来实例化bean,Spring中提供了工厂类的接口,借此来实现实例化bean的逻辑
public interface FactoryBean<T> {
T getObject() throws Exception;
Class<?> getObjectType();
default boolean isSingleton() {
return true;
}
}
摘自书籍
如果bean的实现类是FactoryBean时,通过getBean返回的并不是FactoryBean本身而是getObject()的方法所返回的对象,相当于是getObject()代理了getBean()方法
2 缓存中获取单例的bean
bean的加载,一个bean实例只会被创建一次,第二次获取直接从缓存中获取,如果没有再次从SingletonFactory中获取.
在单例模式下存在的循环依赖问题,解决的方法是:
不等bean加载完成就将bean的ObjectBean放入到缓存中,下次需要使用到这个bean时,直接使用它的ObjectFactory
图片
摘自书籍
3,从bean的实例中获取对象
从缓存中获取到的bean和通过不同的scope中获取到的bean不是最后要使用的bean,我们需要的bean是Factory-method的返回的bean
在使用FactoryBean时,返回的对象时getObject()创建的bean,核心语句为
object = factory.getObject();
4 获取单例
public Object getSingleton(String beanName, ObjectFactory<?> singletonFactory) {
Assert.notNull(beanName, "Bean name must not be null");
synchronized (this.singletonObjects) {
Object singletonObject = this.singletonObjects.get(beanName);
if (singletonObject == null) {
if (this.singletonsCurrentlyInDestruction) {
....
beforeSingletonCreation(beanName);
.....
}
try {
singletonObject = singletonFactory.getObject();
newSingleton = true;
}
......
afterSingletonCreation(beanName);
}
if (newSingleton) {
addSingleton(beanName, singletonObject);
}
}
return singletonObject;
}
}
beforeSingletonCreation(beanName);
singletonObject = singletonFactory.getObject();(核心语言)
afterSingletonCreation(beanName);
5 准备创建bean
protected Object createBean(String beanName, RootBeanDefinition mbd, @Nullable Object[] args)
try {
mbdToUse.prepareMethodOverrides();
}
catch (BeanDefinitionValidationException ex) {
throw new BeanDefinitionStoreException(mbdToUse.getResourceDescription(),
beanName, "Validation of method overrides failed", ex);
}
try {
// Give BeanPostProcessors a chance to return a proxy instead of the target bean instance.
Object bean = resolveBeforeInstantiation(beanName, mbdToUse);
if (bean != null) {
return bean;
}
}
prepareMethodOverrides方法如下
public void prepareMethodOverrides() throws BeanDefinitionValidationException {
// Check that lookup methods exists.
if (hasMethodOverrides()) {
Set<MethodOverride> overrides = getMethodOverrides().getOverrides();
synchronized (overrides) {
for (MethodOverride mo : overrides) {
prepareMethodOverride(mo);
}
}
}
}
protected void prepareMethodOverride(MethodOverride mo) throws BeanDefinitionValidationException {
int count = ClassUtils.getMethodCountForName(getBeanClass(), mo.getMethodName());
if (count == 0) {
throw new BeanDefinitionValidationException(
"Invalid method override: no method with name '" + mo.getMethodName() +
"' on class [" + getBeanClassName() + "]");
}
else if (count == 1) {
// Mark override as not overloaded, to avoid the overhead of arg type checking.
mo.setOverloaded(false);
}
}
相当于是面向切面,当有methodOverWritten,就会为bean创建一个增强
5.2 实例前的处理
try {
// Give BeanPostProcessors a chance to return a proxy instead of the target bean instance.
Object bean = resolveBeforeInstantiation(beanName, mbdToUse);
if (bean != null) {
return bean;
}
}
我们进入resolveBeforeInstantiation进行查看
protected Object resolveBeforeInstantiation(String beanName, RootBeanDefinition mbd) {
Object bean = null;
if (!Boolean.FALSE.equals(mbd.beforeInstantiationResolved)) {
// Make sure bean class is actually resolved at this point.
if (!mbd.isSynthetic() && hasInstantiationAwareBeanPostProcessors()) {
Class<?> targetType = determineTargetType(beanName, mbd);
if (targetType != null) {
bean = applyBeanPostProcessorsBeforeInstantiation(targetType, beanName);
if (bean != null) {
bean = applyBeanPostProcessorsAfterInitialization(bean, beanName);
}
}
}
mbd.beforeInstantiationResolved = (bean != null);
}
return bean;
}
在我们创建bean之前,会进行applyBeanPostProcessorsBeforeInstantiation,applyBeanPostProcessorsAfterInitialization的处理
6.常规的bean的创建
6.1我们对doCreateBean进行分析
instanceWrapper = createBeanInstance(beanName, mbd, args);
(1)如果是单例,先清除缓存
(2)实例化bean,将beanDefinition转换为BeanWrapper
(3)applyMergedBeanDefinitionPostProcessors
(4)依赖的处理
boolean earlySingletonExposure = (mbd.isSingleton() && this.allowCircularReferences &&
isSingletonCurrentlyInCreation(beanName));
if (earlySingletonExposure) {
if (logger.isTraceEnabled()) {
logger.trace("Eagerly caching bean '" + beanName +
"' to allow for resolving potential circular references");
}
addSingletonFactory(beanName, () -> getEarlyBeanReference(beanName, mbd, bean));
}
(5)填充属性
(6)..
(7)..
6.2创建bean的实例
protected BeanWrapper createBeanInstance(String beanName, RootBeanDefinition mbd, @Nullable Object[] args) {
// Make sure bean class is actually resolved at this point.
Class<?> beanClass = resolveBeanClass(mbd, beanName);
if (beanClass != null && !Modifier.isPublic(beanClass.getModifiers()) && !mbd.isNonPublicAccessAllowed()) {
throw new BeanCreationException(mbd.getResourceDescription(), beanName,
"Bean class isn't public, and non-public access not allowed: " + beanClass.getName());
}
Supplier<?> instanceSupplier = mbd.getInstanceSupplier();
if (instanceSupplier != null) {
return obtainFromSupplier(instanceSupplier, beanName);
}
if (mbd.getFactoryMethodName() != null) {
return instantiateUsingFactoryMethod(beanName, mbd, args);
}
// Shortcut when re-creating the same bean...
boolean resolved = false;
boolean autowireNecessary = false;
if (args == null) {
synchronized (mbd.constructorArgumentLock) {
if (mbd.resolvedConstructorOrFactoryMethod != null) {
resolved = true;
autowireNecessary = mbd.constructorArgumentsResolved;
}
}
}
if (resolved) {
if (autowireNecessary) {
return autowireConstructor(beanName, mbd, null, null);
}
else {
return instantiateBean(beanName, mbd);
}
}
// Candidate constructors for autowiring?
Constructor<?>[] ctors = determineConstructorsFromBeanPostProcessors(beanClass, beanName);
if (ctors != null || mbd.getResolvedAutowireMode() == AUTOWIRE_CONSTRUCTOR ||
mbd.hasConstructorArgumentValues() || !ObjectUtils.isEmpty(args)) {
return autowireConstructor(beanName, mbd, ctors, args);
}
// Preferred constructors for default construction?
ctors = mbd.getPreferredConstructors();
if (ctors != null) {
return autowireConstructor(beanName, mbd, ctors, null);
}
// No special handling: simply use no-arg constructor.
return instantiateBean(beanName, mbd);
}
以上代码的意思如下:摘自书籍
(1),解析class
(2),如果工厂方法不为空,那么通过工厂方法
(3),对于不同的构造函数,要指定它的参数
(4),.......
if (mbd.getFactoryMethodName() != null) {
return instantiateUsingFactoryMethod(beanName, mbd, args);
}
6.2.1 autowireConstructor
代码量过多,直接分析功能
(1)构造函数参数的确定
从如下代码中获取,如果explicitArgs 不是空,那么构造函数的参数就是它
if (explicitArgs != null) {
argsToUse = explicitArgs;
}
构造函数的参数可能在缓存中,这样可以从缓存中获取
如果以上两种方式都不可能,则执行如下的代码
ConstructorArgumentValues cargs = mbd.getConstructorArgumentValues();
(2)构造函数的确定
根据(1)构造函数的参数来确定构造函数
(3)转化构造类型
(4)构造函数不确定的验证
(5)根据实例化策略以及得到的构造函数以及构造函数参数实例化bean
6.2.2 无参构造
6.2.3 实例化策略
用户如果没有使用replace和lookUp的配置方法,那么直接使用反射的方式,简单快捷,如果有的话,那就需要使用动态代理的方式将增强设置进去
6.3 记录创建bean 的ObjectFactory
我们来看如下代码
boolean earlySingletonExposure = (mbd.isSingleton() && this.allowCircularReferences &&
isSingletonCurrentlyInCreation(beanName));
是否是单例
是否是循环依赖
是否已经在创建中
当以上三个条件都满足时,我们执行如下的代码
if (earlySingletonExposure) {
if (logger.isTraceEnabled()) {
logger.trace("Eagerly caching bean '" + beanName +
"' to allow for resolving potential circular references");
}
addSingletonFactory(beanName, () -> getEarlyBeanReference(beanName, mbd, bean));
}
我们重点看一下addSingletonFactory这个方法
addSingletonFactory(beanName, () -> getEarlyBeanReference(beanName, mbd, bean));
其中调用了getEarlyBeanReference这个方法,我们在进入这个方法一探究竟
我们关注的是B在填充属性时,不是递归调用,而是使用getBean方法,其意思是指直接调用ObjectFactory来创建A,但B持有的A是没有任何属性的A
protected Object getEarlyBeanReference(String beanName, RootBeanDefinition mbd, Object bean) {
Object exposedObject = bean;
if (!mbd.isSynthetic() && hasInstantiationAwareBeanPostProcessors()) {
for (BeanPostProcessor bp : getBeanPostProcessors()) {
if (bp instanceof SmartInstantiationAwareBeanPostProcessor) {
SmartInstantiationAwareBeanPostProcessor ibp = (SmartInstantiationAwareBeanPostProcessor) bp;
exposedObject = ibp.getEarlyBeanReference(exposedObject, beanName);
}
}
}
return exposedObject;
}
解决循环依赖
6.4 属性注入
我们来看第一个方法autoWireByName,具体功能就是通过value找到已经加载的bean,并递归实例化,然后在放入其中,然后在来看autoWireByType,查看需要注入的属性,遍历这些属性找到与其相配的bean
这时候就获取到了所有的注入属性
if (pvs != null) {
applyPropertyValues(beanName, mbd, bw, pvs);
}
通过这个方法,就可以将属性应用到bean中
6.5 初始化bean
执行初始化之前,已经完成了属性的填充,以及实例化
网友评论