1: 安装docker
参考这个链接，我做了一些整理
step 1: 安装必要的一些系统工具
sudo yum install -y yum-utils device-mapper-persistent-data lvm2
Step 2: 添加软件源信息
sudo yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
Step 3: 列举出来有哪些docker的版本可以安装
yum list docker-ce.x86_64 --showduplicates | sort -r
Step4: 指定版本来安装
yum -y install docker-ce-[VERSION]
比如 我想安装 17的版本
yum -y install docker-ce-17.12.1.ce-1.el7.centos
Step 5:安装完毕，把docker服务启动起来
service docker start
Step 6: 把docker服务加入到系统启动项里面，以便系统重启，docker也能自动起来
systemctl start docker && systemctl enable docker
总结：以上步骤，如果我整理一下，写为一个shell就可以直接去执行了。
sudo yum install -y yum-utils device-mapper-persistent-data lvm2
sudo yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
yum -y install docker-ce-17.12.1.ce-1.el7.centos
service docker start
systemctl start docker && systemctl enable docker
2：安装k8s，参考了阳明的教程，这里我自己整理一番。
https://blog.qikqiak.com/post/use-kubeadm-install-kubernetes-1.10/
准备环境
step 1 我们这里准备两台Centos7的主机用于安装，后续节点可以根究需要添加即可：这里都是指内网ip
$ cat /etc/hosts
192.168.142.48 ljg-master
192.168.142.49 ljg-node-1
192.168.142.52 ljg-node-2
192.168.142.55 ljg-node-3
step 2 禁用防火墙：
systemctl stop firewalld
systemctl disable firewalld
step 3 禁用SELINUX：
setenforce 0
cat /etc/selinux/config
SELINUX=disabled
step 4 创建/etc/sysctl.d/k8s.conf文件，添加如下内容：
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
step 5 执行如下命令使修改生效：
modprobe br_netfilter
sysctl -p /etc/sysctl.d/k8s.conf
3： 我们现在来安装k8s
3.1 : 准备阿里云镜像加速器，以便我们合理的上网，拉取镜像。
cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=http://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg
http://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF
3.1 安装master
3.1.1 拉取镜像， master节点，执行下面的命令：
docker pull cnych/kube-apiserver-amd64:v1.10.0
docker pull cnych/kube-scheduler-amd64:v1.10.0
docker pull cnych/kube-controller-manager-amd64:v1.10.0
docker pull cnych/kube-proxy-amd64:v1.10.0
docker pull cnych/k8s-dns-kube-dns-amd64:1.14.8
docker pull cnych/k8s-dns-dnsmasq-nanny-amd64:1.14.8
docker pull cnych/k8s-dns-sidecar-amd64:1.14.8
docker pull cnych/etcd-amd64:3.1.12
docker pull cnych/flannel:v0.10.0-amd64
docker pull cnych/pause-amd64:3.1
docker tag cnych/kube-apiserver-amd64:v1.10.0 k8s.gcr.io/kube-apiserver-amd64:v1.10.0
docker tag cnych/kube-scheduler-amd64:v1.10.0 k8s.gcr.io/kube-scheduler-amd64:v1.10.0
docker tag cnych/kube-controller-manager-amd64:v1.10.0 k8s.gcr.io/kube-controller-manager- amd64:v1.10.0
docker tag cnych/kube-proxy-amd64:v1.10.0 k8s.gcr.io/kube-proxy-amd64:v1.10.0
docker tag cnych/k8s-dns-kube-dns-amd64:1.14.8 k8s.gcr.io/k8s-dns-kube-dns-amd64:1.14.8
docker tag cnych/k8s-dns-dnsmasq-nanny-amd64:1.14.8 k8s.gcr.io/k8s-dns-dnsmasq-nanny-amd64:1.14.8
docker tag cnych/k8s-dns-sidecar-amd64:1.14.8 k8s.gcr.io/k8s-dns-sidecar-amd64:1.14.8
docker tag cnych/etcd-amd64:3.1.12 k8s.gcr.io/etcd-amd64:3.1.12
docker tag cnych/flannel:v0.10.0-amd64 quay.io/coreos/flannel:v0.10.0-amd64
docker tag cnych/pause-amd64:3.1 k8s.gcr.io/pause-amd64:3.1
可以将上面的命令保存为一个shell脚本，然后直接执行即可。这些镜像是在master节点上需要使用到的镜像，一定要提前下载下来。
3.1.2 待镜像安装完毕，我们就来安装 kubeadm、kubelet、kubectl
yum makecache fast && yum install -y kubelet-1.10.0-0 kubeadm-1.10.0-0 kubectl-1.10.0-0
3.1.3 配置 kubelet
安装完成后，我们还需要对kubelet进行配置，因为用yum源的方式安装的kubelet生成的配置文件将参数--cgroup-driver改成了systemd，而docker的cgroup-driver是cgroupfs，这二者必须一致才行，我们可以通过docker info命令查看：
$ docker info |grep Cgroup
Cgroup Driver: cgroupfs
修改文件kubelet的配置文件/etc/systemd/system/kubelet.service.d/10-kubeadm.conf，将其中的KUBELET_CGROUP_ARGS参数更改成cgroupfs：
Environment="KUBELET_CGROUP_ARGS=--cgroup-driver=cgroupfs"
修改完成后，重新加载我们的配置文件即可：
systemctl daemon-reload
3.2： 集群安装
初始化
到这里我们的准备工作就完成了，接下来我们就可以在master节点上用kubeadm命令来初始化我们的集群了：
kubeadm init --kubernetes-version=v1.10.0 --pod-network-cidr=10.244.0.0/16 --apiserver-advertise-address=192.168.142.48
[root@iZbp1fpm1mc6adbyeht7iqZ ~]#kubeadm init --kubernetes-version=v1.10.0 --pod-network-cidr=10.244.0.0/16 --apiserver-advertise-address=192.168.142.48
[init] Using Kubernetes version: v1.10.0
[init] Using Authorization modes: [Node RBAC]
[preflight] Running pre-flight checks.
[WARNING SystemVerification]: docker version is greater than the most recently validated version. Docker version: 17.12.1-ce. Max validated version: 17.03
[WARNING Hostname]: hostname "izbp1fpm1mc6adbyeht7iqz" could not be reached
[WARNING Hostname]: hostname "izbp1fpm1mc6adbyeht7iqz" lookup izbp1fpm1mc6adbyeht7iqz on 100.100.2.138:53: no such host
[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'
[WARNING FileExisting-crictl]: crictl not found in system path
Suggestion: go get github.com/kubernetes-incubator/cri-tools/cmd/crictl
[preflight] Starting the kubelet service
[certificates] Generated ca certificate and key.
[certificates] Generated apiserver certificate and key.
[certificates] apiserver serving cert is signed for DNS names [izbp1fpm1mc6adbyeht7iqz kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 192.168.142.48]
[certificates] Generated apiserver-kubelet-client certificate and key.
[certificates] Generated etcd/ca certificate and key.
[certificates] Generated etcd/server certificate and key.
[certificates] etcd/server serving cert is signed for DNS names [localhost] and IPs [127.0.0.1]
[certificates] Generated etcd/peer certificate and key.
[certificates] etcd/peer serving cert is signed for DNS names [izbp1fpm1mc6adbyeht7iqz] and IPs [192.168.142.48]
[certificates] Generated etcd/healthcheck-client certificate and key.
[certificates] Generated apiserver-etcd-client certificate and key.
[certificates] Generated sa key and public key.
[certificates] Generated front-proxy-ca certificate and key.
[certificates] Generated front-proxy-client certificate and key.
[certificates] Valid certificates and keys now exist in "/etc/kubernetes/pki"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/admin.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/kubelet.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/controller-manager.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/scheduler.conf"
[controlplane] Wrote Static Pod manifest for component kube-apiserver to "/etc/kubernetes/manifests/kube-apiserver.yaml"
[controlplane] Wrote Static Pod manifest for component kube-controller-manager to "/etc/kubernetes/manifests/kube-controller-manager.yaml"
[controlplane] Wrote Static Pod manifest for component kube-scheduler to "/etc/kubernetes/manifests/kube-scheduler.yaml"
[etcd] Wrote Static Pod manifest for a local etcd instance to "/etc/kubernetes/manifests/etcd.yaml"
[init] Waiting for the kubelet to boot up the control plane as Static Pods from directory "/etc/kubernetes/manifests".
[init] This might take a minute or longer if the control plane images have to be pulled.
[apiclient] All control plane components are healthy after 21.502490 seconds
[uploadconfig] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[markmaster] Will mark node izbp1fpm1mc6adbyeht7iqz as master by adding a label and a taint
[markmaster] Master izbp1fpm1mc6adbyeht7iqz tainted and labelled with key/value: node-role.kubernetes.io/master=""
[bootstraptoken] Using token: 8d1dco.0oiu8d0vz61c7ao8
[bootstraptoken] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstraptoken] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstraptoken] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstraptoken] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[addons] Applied essential addon: kube-dns
[addons] Applied essential addon: kube-proxy
Your Kubernetes master has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
mkdir -p HOME/.kube sudo cp -i /etc/kubernetes/admin.confHOME/.kube/config
sudo chown (id -u):(id -g) $HOME/.kube/config
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
You can now join any number of machines by running the following on each node
as root:
kubeadm join 192.168.142.48:6443 --token 7uznt6.vzfh109zpz4mdu9t --discovery-token-ca-cert-hash sha256:d8a5617375d0b609cfbceaa1d5b4fc554066af3cef4da14fedc316aa225b8a0d
上面做完之后，根据提示，需要做些操作
mkdir -p HOME/.kube sudo cp -i /etc/kubernetes/admin.confHOME/.kube/config
sudo chown (id -u):(id -g) $HOME/.kube/config
特别注意 需要记录这个输出，后面join Node的时候需要用到。
kubeadm join 192.168.142.48:6443 --token 7uznt6.vzfh109zpz4mdu9t --discovery-token-ca-cert-hash sha256:d8a5617375d0b609cfbceaa1d5b4fc554066af3cef4da14fedc316aa225b8a0d
安装之后，发现 Node 还是not ready
[root@iZbp1fpm1mc6adbyeht7iqZ k8s]# kubectl get nodes
NAME STATUS ROLES AGE VERSION
izbp1fpm1mc6adbyeht7iqz NotReady master 19m v1.10.0
image.png
怎样解决这个问题：
安装 Pod Network
wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
kubectl apply -f kube-flannel.yml
clusterrole.rbac.authorization.k8s.io "flannel" created
clusterrolebinding.rbac.authorization.k8s.io "flannel" created
serviceaccount "flannel" created
configmap "kube-flannel-cfg" created
daemonset.extensions "kube-flannel-ds" created
安装完成后使用kubectl get pods命令可以查看到我们集群中的组件运行状态，如果都是Running状态的话，那么恭喜你，你的master节点安装成功了。
$ kubectl get pods --all-namespaces
NAMESPACE NAME READY STATUS RESTARTS AGE
kube-system etcd-ydzs-master1 1/1 Running 0 10m
kube-system kube-apiserver-ydzs-master1 1/1 Running 0 10m
kube-system kube-controller-manager-ydzs-master1 1/1 Running 0 10m
kube-system kube-dns-86f4d74b45-f5595 3/3 Running 0 10m
kube-system kube-flannel-ds-qxjs2 1/1 Running 0 1m
kube-system kube-proxy-vf5fg 1/1 Running 0 10m
kube-system kube-scheduler-ydzs-master1 1/1 Running 0 10m
kubeadm初始化完成后，默认情况下Pod是不会被调度到master节点上的，所以现在还不能直接测试普通的Pod，需要添加一个工作节点后才可以。
4： 安装node，安装完了，就可以直接去拉取镜像了
Node上如何安装docker参考上文1所述。
摘抄下来
step 1: 安装必要的一些系统工具
sudo yum install -y yum-utils device-mapper-persistent-data lvm2
Step 2: 添加软件源信息
sudo yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
Step 3: 列举出来有哪些docker的版本可以安装
yum list docker-ce.x86_64 --showduplicates | sort -r
Step4: 指定版本来安装
yum -y install docker-ce-[VERSION]
比如 我想安装 17的版本
yum -y install docker-ce-17.12.1.ce-1.el7.centos
Step 5:安装完毕，把docker服务启动起来
service docker start
Step 6: 把docker服务加入到系统启动项里面，以便系统重启，docker也能自动起来
systemctl start docker && systemctl enable docker
总结：以上步骤，如果我整理一下，写为一个shell就可以直接去执行了。
sudo yum install -y yum-utils device-mapper-persistent-data lvm2
sudo yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
yum -y install docker-ce-17.12.1.ce-1.el7.centos
service docker start
systemctl start docker && systemctl enable docker
step 1准备好了，去拉取镜像
设置加速器：科学上网的话，我们可以使用阿里云的源进行安装
cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=http://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg
http://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF
docker pull cnych/kube-proxy-amd64:v1.10.0
docker pull cnych/flannel:v0.10.0-amd64
docker pull cnych/pause-amd64:3.1
docker pull cnych/kubernetes-dashboard-amd64:v1.8.3
docker pull cnych/heapster-influxdb-amd64:v1.3.3
docker pull cnych/heapster-grafana-amd64:v4.4.3
docker pull cnych/heapster-amd64:v1.4.2
docker tag cnych/flannel:v0.10.0-amd64 quay.io/coreos/flannel:v0.10.0-amd64
docker tag cnych/pause-amd64:3.1 k8s.gcr.io/pause-amd64:3.1
docker tag cnych/kube-proxy-amd64:v1.10.0 k8s.gcr.io/kube-proxy-amd64:v1.10.0
docker tag cnych/kubernetes-dashboard-amd64:v1.8.3 k8s.gcr.io/kubernetes-dashboard-amd64:v1.8.3
docker tag cnych/heapster-influxdb-amd64:v1.3.3 k8s.gcr.io/heapster-influxdb-amd64:v1.3.3
docker tag cnych/heapster-grafana-amd64:v4.4.3 k8s.gcr.io/heapster-grafana-amd64:v4.4.3
docker tag cnych/heapster-amd64:v1.4.2 k8s.gcr.io/heapster-amd64:v1.4.2
step 2 : 安装 kubeadm、kubelet、kubectl
yum makecache fast && yum install -y kubelet-1.10.0-0 kubeadm-1.10.0-0 kubectl-1.10.0-0
step 3 : 检查 cgroup ，docker的和 kubelet的是否一致
docker info |grep Cgroup
若不一致，编辑下面的文件
vim /etc/systemd/system/kubelet.service.d/10-kubeadm.conf
使上面的配置生效
systemctl daemon-reload
step 4： 把Node Join 到master集群中去
kubeadm join 192.168.142.48:6443 --token 8d1dco.0oiu8d0vz61c7ao8 --discovery-token-ca-cert-hash sha256:241d59a0429288f47d5159393faf4fd55f3665081cba87c474c2578ebb2316c5
step5 ： 去master集群里看是否添加node成功。
image.png
至此：集群安装完毕
5： 接下来 还有 安装dashboard 和 heasper插件
网友评论