as 100g will be more and more widely used in green data center solution,here we sum pu the full range of QSFP 100GbE Transceivers type:
1. 100G QSFP28 sr 300m Transceiver
100GBASE-SR4 QSFP transceiver, up to 70m over parallel OM3 or 100m over OM4 multi-mode fiber
parameters:
• 4 independent parallel optical channels
• Each channel data rate up to 25.78Gb/s with integrated CDR
• Up to 300m link on Om4Multi-mode Fiber
• 850nm VCSEL/PD Array Technology
• CML Compatible electrical I/O
• QSFP28 MSA Compliance
• Optical connectivity via industry standard MPO/MTP-terminated fiber ribbon
• Diagnostic monitors for VCSEL bias, transmitted power, received power, module temperature, and module supply
• 4 independent parallel optical
applications:
• Infiniband EDR interconnects.
• 100GBASE- SR4 Ethernet
• High performance computing interconnect
2.100GBASE-SWDM4 QSFP transceiver
up to 70m over OM3 or 100m over OM4 duplex multi-mode fiber
parameters:
• Hot-pluggable QSFP28 form factor
• Supports 103.1Gb/s aggregate bit rate
• 3.5W maximum power dissipation
• RoHS-6 compliant
• Commercial case temperature range of 0°C to 70°C
• Single 3.3V power supply
• Maximum link length of 100m on OM4 Multimode Fiber (MMF)
• 4x25Gb/s 850nm VCSEL-based transmitter
• 4x25G CAUI-4 electrical interface
• Duplex LC receptacles
• I2C management interface
applications:
• 100G Ethernet over Duplex MMF
3.100G QSFP28 Sr bidi Transceiver
100GBASE-BIDI QSFP transceiver, up to 70m over OM3 or 100m over OM4 duplex multi-mode fiber
The 100G BiDi transceiver module is designed using 50 Gbps PAM4 integrated circuits and optical signaling with mature 2-colour (850 and 900nm) VCSEL technology highly leveraged from 40 Gbps to 100 Gbps.
The new 100G BiDi transceiver module leverages proven BiDi technology and builds upon the 40G success story by offering a higher speed product that we believe to be better choice than SWDM4
4.100G QSFP28 CWDM4 & CLR4 2km Transceiver
100GBASE-PSM4 100G dual speed QSFP Optics Module, up to 500m over parallel SMF
QSFP-100G-CWDM4 Module supports link lengths of up to 2 km over a standard pair of G.652 Single-Mode Fiber (SMF) with duplex LC connectors. The 100 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device.
100GbE QSFP28 transceiver module, is designed for high port densities with its compact size and low power consumption. It meets both the CWDM4 MSA and CLR4 Alliance optical interface specifications, as well as the IEEE 802.3bm CAUI-4 electrical interface specification. The TRQ5E10ENF is ideally suited for 100G interconnections between data center switches in addition to conventional routers and transport interfaces in core networks.
it is a fully integrated 4 x 25Gbit/s optical transceiver module that consists of 1310 nm wavelength DFBs, Driver ICs, PIN photo-diodes, and clock and data recovery (CDR) ICs with 25 Gbit/s electrical interfaces for operation over a pair of single mode fiber with duplex LC connectors.it supports links of up to 2km. Mechanical dimensions, connecters, footprint of the TRQ5E10ENF conform to SFF-8661 specification.
parameters:
• 4 independent optical lanes
• Lane data rate of 25.78125Gb/s
• Aggregate data rate in excess of 103.125Gb/s (over 4 lanes)
• 2km link on SMF single-mode Fiber
• CWDM Laser/ Pin PD Array Technology
• QSFP28 MSA Compatible electrical I/O
• +3.3V power supply
applications:
• High performance computing, data com and sever data links
• High speed access
5.QSFP-100G-CWDM4
100GBASE-CWDM4 QSFP Optics Module, up to 2km over duplex SMF
parameters:
• Hot-pluggable QSFP28 form factor
• Supports 103.1Gb/s aggregate bit rate
• 3.5W maximum power dissipation
• Single 3.3V power supply
• Maximum link length of 2km on Single Mode Fiber (SMF)
• 4x25Gb/s 1310nm DFB-based transmitter
• 4x25G electrical interface
• Full digital diagnostics functions
• Integrated 4-channel CWDM mux/demux for duplex LC operation
• Duplex LC receptacles
applications:
• 100GBASE 100G Ethernet
6.QSFP-100G-LRL4
100GBASE-LRL4 QSFP Optics Module, up to 2km over duplex SMF
parameters:
• 4 electrical , 4 optical lanes
• Aggregate data rate in excess of 103.125Gb/s
• 10km link on SMF
• Cooled 4x25G LAN-WDM transmitter
• +3.3V power supply
• Standards
IEEE 802.3ba
ITU-T G.959.1 2012
CFP4 MSA
applications:
• 100GBASE 100G Ethernet
7.QSFP-100G-LR4 single rate
100GBASE-LR4 QSFP Optics Module, up to 10km over duplex SMF
parameters:
• 4 electrical , 4 optical lanes
• Aggregate data rate in excess of 103.125Gb/s
• 10km link on SMF
• Cooled 4x25G LAN-WDM transmitter
• +3.3V power supply
• Standards
IEEE 802.3ba
ITU-T G.959.1 2012
CFP4 MSA
applications:
• 100GBASE 100G Ethernet
8.QSFP-100G-LR4 dual rate
100GBASE-LR4 QSFP Optics Module, up to 10km over duplex SMF with dual rate
parameters:
• 4 electrical , 4 optical lanes
• Aggregate data rate in excess of 103.125Gb/s
• 10km link on SMF
• Cooled 4x25G LAN-WDM transmitter
• +3.3V power supply
• Standards
IEEE 802.3ba
ITU-T G.959.1 2012
CFP4 MSA
applications:
• 100GBASE 100G Ethernet
9.QSFP-100G-ER lite 30km
100GBASE-ERL4 QSFP Optics Module, up to 30km over duplex SMF
parameters:
• Hot pluggable QSFP28 MSA form factor
• Compliant to Ethernet 100GBASE-ER4 Lite
• Supports 103.1Gb/s aggregate bit rate
• Up to 30km reach for G.652 SMF without FEC
• Up to 40km reach for G.652 SMF with FEC
• Single +3.3V power supply
• Operating case temperature: 0~70℃
• Transmitter: cooled 4x25Gb/s LAN WDM EML
TOSA (1295.56, 1300.05, 1304.58, 1309.14nm)
• Receiver: 4x25Gb/s APD ROSA
• 4x25G electrical interface (OIF CEI-28G-VSR)
• Maximum power consumption 4.5W
• Duplex LC receptacle
• RoHS-6 compliant
Applications:
• 100GBASE- ER4 Ethernet Links
• Infiniband QDR and DDR interconnects
• Client-side 100G Telecom connections
10.QSFP-100G-DZ2-xx
100G DWDM QSFP transceiver, 2 lambda PAM4, 19x.x0 THz, up to 80km over single-mode fiber
网友评论