1、Server deployment（Windows virtual machine）
1. Server requirements
simple：WIN10+4core+8G+200G （Support 100 devices）
medium：WIN10+8core+16G+800G （Support 200 devices）
large：WIN10+16core+32G+1.6T（Support 1000 devices）
2. Turn on CPU virtualization
Check whether the system has been enabled CPU virtualization, right click task bar -- task manager -- performance -- CPU, pop up the following interface to view
If you have not turned it on, follow this tutorial before proceeding.
3. Open the port
This system is a terminal + server structure, and the ports that need to be opened are 19001,8022,8023. Please ensure that these three ports are not occupied by other services on the host and are open in the network.
4. setup VirtualBox
Step1. download virtualBox
Step2. install virtualBox
Run the installation program and install it according to the default Settings. The Windows security prompt box will pop up during the installation process. Check "always trust the software from OracleCorporation" and click "install".
image
4. Import OVA file
Step1. Download OVA file
Step2. Run the Oracle VM VirtualBox manager
Step3. Modify the default virtual computer storage location
Management → global Settings --- > change the normal default virtual computer location to: X:\VirtualBox VMs (please make sure that the target partition is reserved with enough storage space)
Step4. Import the onpremise-base-image-1.1.4.ova mirror file
Management → import virtual computer → select "path to import virtual computer" → import
step5. Start virtual machine
https://moredian.cowtransfer.com/s/6bf821c8cbbf4b
step6. The virtual machine has started
5. View the server address
The server virtual machine is configured with a NAT network, so its service address is the host address. All you need is the host IP.
Press WINDOWS+R in the host system and enter CMD to run the command line:
Type the ipconfig directive to get the host IP address.
Please record and save the address. This address will be used for subsequent visits to the WEB management and terminal device activation.
2、Server initialization
1. Login management background
Enter the virtual server IP:8023 in the browser to enter the login page of the management background.
Initial login username/password: admin/admin.
2. Change login password
To ensure the security of your account, you must change your initial password to the one you specify after the first login
3. The import license
By default, the system will give away access rights for 3 devices. If the number of simultaneous access is more than 3 devices, you need to apply for authorization.
Find the "agency code" in the "agency management" → "basic information" of the management background, and send the agency ID and the received email account to the after-sales personnel of the magic point. After the authorization code is generated, it will be sent to the designated mailbox.
In the organization management → authorization management, find the generated organization ID, the received authorization file import.
Each authorization code contains the maximum number of terminals that each server can access. In case of capacity expansion, authorization should be increased.
image
3、Device activation/registration
1. Hardware installation
Please first correctly installed face access control machine, to ensure that the power supply, network, access control line has been correctly connected.
2. power on
After the device is power on, it will start up automatically and carry out the activation process.
3. Configuration guide
After boot will show the configuration wizard, according to the actual network environment configuration network.
4. The activation
Fill in the server address, that is, the address shown in 1.5 (do not need to take the upper port number), if the network is correctly configured and the server address is correctly configured, the device will automatically complete the activation into the network.
5. Equipment named
After the device is activated successfully, each device can be given a unique name to facilitate subsequent management and use. You can also rename the device in the corresponding module in the administration background.
4、Management background operation brief description
1. Navigation bar introduction
(1) the name of the organization: the default is the test organization, can be modified in the "organization management".
(2) workbench: the platform development function business module entrance are unified here
(3) address book: for the management of organizational structure and personnel information, face input is also here.
(4) organization management: including the deployment of relevant global information and configuration, and the server upgrade and other functions.
(5)Device management: device list and device information can be viewed, device APK and firmware upgrade entry is also here.
(6)document center: system API interface swagger version.
(7)administrator menu: including change password, binding members, system Settings, language selection, exit login entry.
2. Equipment management
This module can view all access devices and their information, can be renamed, unbind, upgrade and other operations.
3.Organization management
① Basic information
Here you can see the basic information of the organization, including the name of the organization, the number of people in the organization, the number of departments, as well as the operation of the administrator to change the password, as well as the operation of managing the bound members.
② Record storage Settings
Record storage cycles can be selected over a period of one month to two years.
Storage state: the virtual machine hard disk is stored in a dynamic allocation mode. Please make sure that the disk of the virtual machine. VMDK file has enough remaining space. The amount of storage is mainly related to the amount of record storage, which can be roughly calculated by using 50K identification data × the number of data generated daily × the set record storage cycle.
③ Strangers' faces
For those who are not authorized to do so or those who are not authorized to do so, you can customize the prompt language and voice broadcast of the device interface
④ sub-administrator
Sub-administrators can be created and managed. Currently, administrator permissions can be restricted according to departments, devices, operation modules and other dimensions
4. Personnel management
Here, we can manage departments and personnel, and also realize face input through headshot of personnel, and support batch operation. We can import member information and face photos in batches. Please read the operation instructions on the interface carefully before import, so as to avoid misoperation.
5. Face entry
Localization scheme face algorithm is only available on the device, so the server will be asked to select the device that provides the algorithm before entering the face.
At present, there are three ways to input faces in the management background:
① Batch face entry
It is suggested to select more equipment to input at the same time to improve the speed of input
② Upload single photo entry
③ Direct input with device
This method is the fastest and is preferred in the presence of personnel
5. The entrance guard management
After the equipment and personnel information is configured, access control management can be started. Open the workbench → Moredian access control
You can set up different access groups according to different permissions, each of which contains the following information
We can give each permission group custom recognition after the interface text tips and voice broadcast. Dynamic prompt content can be referred to by special wildcard characters, such as [name] refers to the name of the person, [day] refers to the day of the week, [id] refers to the work number, [dp] refers to the morning | afternoon | evening, relevant configuration can click the "? "at the end of the line. The button is always available.
It is possible to flexibly define which access control devices are allowed to enter and leave by the designated personnel within the specified time limit.
Each employee can belong to more than one permission group at the same time, when making the specific judgment of opening the door, to release the principle of priority execution.
Special permission group description:
①Default group. There is only one default group in the system. When a permission group is designated as the default group, the newly entered members will belong to the group by default.
②Full group. This permission group is pre-generated by the system and by default contains all members of the organization and is the default group.
All access information of personnel in the system will be saved as identification records, which can be searched, viewed and exported in the magic point access control → identification records.
6. Members of the binding
Select bind member in the admin drop-down menu in the upper left corner to bind the administrator account to a specific member.
After the completion of the binding can be very convenient to complete the device end administrator interface through the way of face brushing.
7. System Settings
Click "system Settings" in the upper left corner admin drop-down menu to enter.
① The data backup
The data backup function will backup the static data in the system, and the system will do automatic backup every day, or manual backup, and the backup data can also be exported manually for better preservation. In order to ensure the safety of your data, it is recommended to back up the data and keep it properly after a large amount of information entry.
② System upgrade
Subsequent fixes to major issues and releases of new features will be made through "system upgrades."
5、Device operation instructions
1. Login to the device management interface
step1. Long press the upper left corner of the screen (time display) for 2 seconds to enter the login interface
step2. Administrator login
At present, it supports the administrator to brush the face (recommended, refer to the above, first complete the personnel binding) and use the management account password to log in. After login, the user will enter the following interface
2.Device face entry
step1. Click "enter face"
step2. Enter the job number to check the employee
step1. Click "enter face" on the left.
3.Modify network configuration
Click "configure network" on the main configuration screen to switch between wired or wireless and IP address configurations.
4.View device information
Click "device information" in the main configuration interface to view the main information of the device
4.Device unbinding
If the server needs to be replaced, the device needs to be unbound. At the bottom of the device information interface, click "unbind and reset". This operation is an emergency function, and the activation information will be forced to clear one-way. The recommended unbind operation is to delete the device from the list of devices in the management background when the device is online.
6、Version upgrade instructions
1.Equipment upgrades
Management background → device management → device upgrade → select upgrade package
Version information
Select the device you want to upgrade
Select upgrade time
View upgrade results
During the upgrade process, please ensure that the equipment will not be disconnected from the network. After the upgrade, the equipment will restart.
2.Server upgrade
1.Database upgrade
Upper right corner admin→ system Settings
Click upload upgrade package and select the upgrade package.
Restore the first data loaded to the database
2.Service program upgrade
Switch to "system upgrade" module → import data upgrade package
Click "upgrade to this version" in the first packet record
After the upgrade, the server will restart and require a new login, and the upgrade is completed.
网友评论