美文网首页
Phicomm K2 - burn third party fi

Phicomm K2 - burn third party fi

作者: twoyang | 来源:发表于2017-02-18 19:06 被阅读0次

1. downgrade office firmware

http://code.taobao.org/svn/hopol-bak/K2/phicomm/K2/SW_K2_703004657_V22.4.2.8.bin

2. enable ssh service only

http://code.taobao.org/svn/hopol-bak/K2/tianbaoha_breed_ssh.dat

please change the default password 'tianbaoha' and disable telnet service which is not safe

3. burn bootloader 'breed' into flash

http://www.right.com.cn/forum/thread-161906-1-1.html
下载地址

CPU MediaTek MT7620A ver 2, eco 6
内存  64MB DDR2
Flash   Macronix MX25L6435E @ 24MHz (8MB)
以太网 MediaTek MT7620A built-in 5-port 10/100M switch
时钟频率    CPU: 580MHz, Bus: 193MHz
编译日期    2016-07-29 [git-5855789]
版本  1.0 (r928)

Note: The flash size of Phicomm K2 is only 8M. So the firmware size can't greater than 8M.

4. burn third party firmware into flash

5. kcptun

Kcptun Server一键安装脚本
kcptun使用教程

相关文章

网友评论

      本文标题:Phicomm K2 - burn third party fi

      本文链接:https://www.haomeiwen.com/subject/jthdwttx.html