美文网首页Tomcat
Tomcat请求处理分析(二) - 容器组件处理过程

Tomcat请求处理分析(二) - 容器组件处理过程

作者: buzzerrookie | 来源:发表于2018-09-13 19:28 被阅读2次

    本文接着上一篇文章分析Tomcat是如何处理请求的,主要涉及到各个容器组件如Engine、Host和Context的处理过程。

    Engine处理请求

    StandardEngineValve的invoke方法代码如下,最后一句委托给Host去处理:

    @Override
    public final void invoke(Request request, Response response)
        throws IOException, ServletException {
        // Select the Host to be used for this Request
        Host host = request.getHost();
        if (host == null) {
            response.sendError
                (HttpServletResponse.SC_BAD_REQUEST,
                    sm.getString("standardEngine.noHost",
                                request.getServerName()));
            return;
        }
        if (request.isAsyncSupported()) {
            request.setAsyncSupported(host.getPipeline().isAsyncSupported());
        }
        // Ask this Host to process this request
        host.getPipeline().getFirst().invoke(request, response);
    }
    

    Host处理请求

    接着Host会去处理请求,在Tomcat启动分析(七) - Container及相关组件中曾提到StandardHost的构造函数为自己的Pipeline添加了基本阀StandardHostValve,StandardPipeline调用getFirst得到第一个阀去处理请求,由于基本阀是最后一个,所以最后会由基本阀去处理请求。StandardHostValve的invoke方法代码如下:

    @Override
    public final void invoke(Request request, Response response)
        throws IOException, ServletException {
        // Select the Context to be used for this Request
        Context context = request.getContext();
        if (context == null) {
            response.sendError(HttpServletResponse.SC_INTERNAL_SERVER_ERROR,
                    sm.getString("standardHost.noContext"));
            return;
        }
    
        if (request.isAsyncSupported()) {
            request.setAsyncSupported(context.getPipeline().isAsyncSupported());
        }
        boolean asyncAtStart = request.isAsync();
        boolean asyncDispatching = request.isAsyncDispatching();
        try {
            context.bind(Globals.IS_SECURITY_ENABLED, MY_CLASSLOADER);
            // 省略一些代码
            try {
                if (!asyncAtStart || asyncDispatching) {
                    context.getPipeline().getFirst().invoke(request, response);
                } else {
                    // Make sure this request/response is here because an error
                    // report is required.
                    if (!response.isErrorReportRequired()) {
                        throw new IllegalStateException(sm.getString("standardHost.asyncStateError"));
                    }
                }
            } catch (Throwable t) {
                // 省略一些代码
            }
    
            // 省略一些代码
        } finally {
            // 省略一些代码
        }
    }
    

    Context处理请求

    接着Context会去处理请求,同理,StandardContextValve的invoke方法会被调用:

    @Override
    public final void invoke(Request request, Response response)
        throws IOException, ServletException {
        // Disallow any direct access to resources under WEB-INF or META-INF
        MessageBytes requestPathMB = request.getRequestPathMB();
        if ((requestPathMB.startsWithIgnoreCase("/META-INF/", 0))
                || (requestPathMB.equalsIgnoreCase("/META-INF"))
                || (requestPathMB.startsWithIgnoreCase("/WEB-INF/", 0))
                || (requestPathMB.equalsIgnoreCase("/WEB-INF"))) {
            response.sendError(HttpServletResponse.SC_NOT_FOUND);
            return;
        }
    
        // Select the Wrapper to be used for this Request
        Wrapper wrapper = request.getWrapper();
        if (wrapper == null || wrapper.isUnavailable()) {
            response.sendError(HttpServletResponse.SC_NOT_FOUND);
            return;
        }
    
        // Acknowledge the request
        try {
            response.sendAcknowledgement();
        } catch (IOException ioe) {
            container.getLogger().error(sm.getString(
                    "standardContextValve.acknowledgeException"), ioe);
            request.setAttribute(RequestDispatcher.ERROR_EXCEPTION, ioe);
            response.sendError(HttpServletResponse.SC_INTERNAL_SERVER_ERROR);
            return;
        }
    
        if (request.isAsyncSupported()) {
            request.setAsyncSupported(wrapper.getPipeline().isAsyncSupported());
        }
        wrapper.getPipeline().getFirst().invoke(request, response);
    }
    

    Wrapper处理请求

    接着Wrapper会去处理请求,同理,StandardWrapperValve的invoke方法会被调用:

    @Override
    public final void invoke(Request request, Response response)
        throws IOException, ServletException {
        // 省略一些代码
        // Create the filter chain for this request
        ApplicationFilterChain filterChain =
                ApplicationFilterFactory.createFilterChain(request, wrapper, servlet);
    
        // Call the filter chain for this request
        // NOTE: This also calls the servlet's service() method
        try {
            if ((servlet != null) && (filterChain != null)) {
                // Swallow output if needed
                if (context.getSwallowOutput()) {
                    try {
                        SystemLogHandler.startCapture();
                        if (request.isAsyncDispatching()) {
                            request.getAsyncContextInternal().doInternalDispatch();
                        } else {
                            filterChain.doFilter(request.getRequest(),
                                    response.getResponse());
                        }
                    } finally {
                        String log = SystemLogHandler.stopCapture();
                        if (log != null && log.length() > 0) {
                            context.getLogger().info(log);
                        }
                    }
                } else {
                    if (request.isAsyncDispatching()) {
                        request.getAsyncContextInternal().doInternalDispatch();
                    } else {
                        filterChain.doFilter
                            (request.getRequest(), response.getResponse());
                    }
                }
    
            }
        } catch (ClientAbortException e) {
            // 省略一些代码
        }
    
        // 省略一些代码
    }
    
    • ApplicationFilterFactory.createFilterChain为每个请求创建一个ApplicationFilterChain过滤器链;
    • 过滤器链调用doFilter处理请求。

    ApplicationFilterChain过滤器链

    ApplicationFilterChain类的doFilter函数代码如下,它会将处理委托给internalDoFilter函数。

    @Override
    public void doFilter(ServletRequest request, ServletResponse response)
        throws IOException, ServletException {
    
        if( Globals.IS_SECURITY_ENABLED ) {
            final ServletRequest req = request;
            final ServletResponse res = response;
            try {
                java.security.AccessController.doPrivileged(
                    new java.security.PrivilegedExceptionAction<Void>() {
                        @Override
                        public Void run()
                            throws ServletException, IOException {
                            internalDoFilter(req,res);
                            return null;
                        }
                    }
                );
            } catch( PrivilegedActionException pe) {
                Exception e = pe.getException();
                if (e instanceof ServletException)
                    throw (ServletException) e;
                else if (e instanceof IOException)
                    throw (IOException) e;
                else if (e instanceof RuntimeException)
                    throw (RuntimeException) e;
                else
                    throw new ServletException(e.getMessage(), e);
            }
        } else {
            internalDoFilter(request,response);
        }
    }
    

    ApplicationFilterChain类的internalDoFilter函数代码如下:

    private void internalDoFilter(ServletRequest request,
                                    ServletResponse response)
        throws IOException, ServletException {
        // Call the next filter if there is one
        if (pos < n) {
            ApplicationFilterConfig filterConfig = filters[pos++];
            try {
                Filter filter = filterConfig.getFilter();
    
                if (request.isAsyncSupported() && "false".equalsIgnoreCase(
                        filterConfig.getFilterDef().getAsyncSupported())) {
                    request.setAttribute(Globals.ASYNC_SUPPORTED_ATTR, Boolean.FALSE);
                }
                if( Globals.IS_SECURITY_ENABLED ) {
                    final ServletRequest req = request;
                    final ServletResponse res = response;
                    Principal principal =
                        ((HttpServletRequest) req).getUserPrincipal();
    
                    Object[] args = new Object[]{req, res, this};
                    SecurityUtil.doAsPrivilege ("doFilter", filter, classType, args, principal);
                } else {
                    filter.doFilter(request, response, this);
                }
            } catch (IOException | ServletException | RuntimeException e) {
                throw e;
            } catch (Throwable e) {
                e = ExceptionUtils.unwrapInvocationTargetException(e);
                ExceptionUtils.handleThrowable(e);
                throw new ServletException(sm.getString("filterChain.filter"), e);
            }
            return;
        }
    
        // We fell off the end of the chain -- call the servlet instance
        try {
            if (ApplicationDispatcher.WRAP_SAME_OBJECT) {
                lastServicedRequest.set(request);
                lastServicedResponse.set(response);
            }
    
            if (request.isAsyncSupported() && !servletSupportsAsync) {
                request.setAttribute(Globals.ASYNC_SUPPORTED_ATTR,
                        Boolean.FALSE);
            }
            // Use potentially wrapped request from this point
            if ((request instanceof HttpServletRequest) &&
                    (response instanceof HttpServletResponse) &&
                    Globals.IS_SECURITY_ENABLED ) {
                final ServletRequest req = request;
                final ServletResponse res = response;
                Principal principal =
                    ((HttpServletRequest) req).getUserPrincipal();
                Object[] args = new Object[]{req, res};
                SecurityUtil.doAsPrivilege("service",
                                            servlet,
                                            classTypeUsedInService,
                                            args,
                                            principal);
            } else {
                servlet.service(request, response);
            }
        } catch (IOException | ServletException | RuntimeException e) {
            throw e;
        } catch (Throwable e) {
            e = ExceptionUtils.unwrapInvocationTargetException(e);
            ExceptionUtils.handleThrowable(e);
            throw new ServletException(sm.getString("filterChain.servlet"), e);
        } finally {
            if (ApplicationDispatcher.WRAP_SAME_OBJECT) {
                lastServicedRequest.set(null);
                lastServicedResponse.set(null);
            }
        }
    }
    
    • pos和n是ApplicationFilterChain的成员变量,分别表示过滤器链的当前位置和过滤器总数,所以当pos小于n时,会不断执行ApplicationFilterChain的doFilter方法;
    • 当pos等于n时,过滤器都执行完毕,终于执行了熟悉的servlet.service(request, response)方法。

    相关文章

      网友评论

        本文标题:Tomcat请求处理分析(二) - 容器组件处理过程

        本文链接:https://www.haomeiwen.com/subject/ljobgftx.html