Windows 命令行添加 IPP 协议打印机

最近公司买了台 小米米家喷墨打印机 居然 不支持 不同路由器之间的打印(不同网段), 研究如下

1. 在Linux Ubuntu下可以通过 ipp://[打印机IP地址]/ 添加打印机 并打印正常
2. Windows 下通过 IPP 添加打印机,打印时打印队列里直接错误,在打印队列里面能显示机器打印状态(其它同事打印文档名称). 找不到错误日志.无法定位错误.最后通过IPP协议发送跳过Windows 打印驱动解决.

总结一下过程:

1. 扫描打印机,查看打印机支持的协议

    ~: nmap -v [打印机IP地址]
    Starting Nmap 7.92 ( https://nmap.org ) at 2021-11-11 09:34 CST
    Initiating Ping Scan at 09:34
    Scanning [打印机IP地址] [2 ports]
    Completed Ping Scan at 09:34, 0.00s elapsed (1 total hosts)
    Initiating Parallel DNS resolution of 1 host. at 09:34
    Completed Parallel DNS resolution of 1 host. at 09:34, 12.36s elapsed
    Initiating Connect Scan at 09:34
    Scanning [打印机IP地址] [1000 ports]
    Discovered open port 443/tcp on [打印机IP地址]
    Discovered open port 80/tcp on [打印机IP地址]
    Discovered open port 631/tcp on [打印机IP地址]
    Discovered open port 5357/tcp on [打印机IP地址]
    Completed Connect Scan at 09:34, 0.30s elapsed (1000 total ports)
    Nmap scan report for [打印机IP地址]
    Host is up (0.021s latency).
    Not shown: 996 closed tcp ports (conn-refused)
    PORT     STATE SERVICE
    80/tcp   open  http
    443/tcp  open  https
    631/tcp  open  ipp
    5357/tcp open  wsdapi
   
    Read data files from: /snap/nmap/2536/bin/../share/nmap
    Nmap done: 1 IP address (1 host up) scanned in 12.74 seconds
   

2. 添加IPP网络共享打印机(2种方式)
   1. 手动 输入 http://[打印机IP地址]:631/ 自行查找 或 指定 `http://[打印机IP地址]:631/ipp/print
   2. 代码

    rundll32 printui.dll,PrintUIEntry /if /b "Mi Wireless Inkjet Printer" /f "Mi Wireless Inkjet Printer_1.0.4.18\HNAAAQ40.inf" /r "http://[打印机IP地址]:631/ipp/print" /m "Mi Wireless Inkjet Printer"
   

3. 测试打印机(失败)
4. 感觉驱动缺陷,尝试IPP协议打印 Internet Printing Protocol (IPP) for nodejs,和 ipp-printjob-java 成功打印

参考资料:
rundll32.exe printui.dll，PrintUIEntry
Printer Drivers Installation and Troubleshooting Guide 代码添加驱动名称和模块