Linux项目之LVS构建keepalive站点

作者: 王王王小白 | 来源:发表于2017-09-16 11:33 被阅读0次

实验设备：4台相同版本服务器

环境要求：

iptables -F
setenforce 0

实验说明：

webserver 1：192.168.192.138
webserver 2：192.168.192.106
lvsserver 1：192.168.192.106
lvsserver 2：192.168.192.105

实验步骤

1.构建webserver服务

安装web服务nginx或者httpd,两台webserver都安装

yum -y install nginx
echo "web1">/usr/share/nginx/html/index.html
echo "web2">/usr/share/nginx/html/index.html
systemctl start nginx

修改内核参数arp

写脚本进行修改，同时指明vip（virtual server IP）

vim arp.sh
#!/bin/bash
vip=192.168.192.11
mask='255.255.255.255'
case $1 in
start)
echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce
echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce
ifconfig lo:0 $vip netmask $mask broadcast $vip up
route add -host $vip dev lo:0
;;
stop)
ifconfig lo:0 down
echo 0 > /proc/sys/net/ipv4/conf/all/arp_ignore
echo 0 > /proc/sys/net/ipv4/conf/lo/arp_ignore
echo 0 > /proc/sys/net/ipv4/conf/all/arp_announce
echo 0 > /proc/sys/net/ipv4/conf/lo/arp_announce
;;
*)
echo "Usage $(basename $0) start|stop"
exit 1
;;
esac

复制两份分别在两台webserver上执行

bash arp.sh start

构建lvs

分别在两台lvsserver上安装lvs

yum -y install ipvsadm
vim lvs.sh
#!/bin/bash
vip='192.168.192.11'
iface='ens32:0'
mask='255.255.255.255'
port='80'
rs1='192.168.192.106'
rs2='192.168.192.138'
scheduler='rr'
type='-g'
case $1 in
start)
ifconfig $iface $vip netmask $mask broadcast $vip up
iptables -F
ipvsadm -A -t ${vip}:${port} -s $scheduler
ipvsadm -a -t ${vip}:${port} -r ${rs1} $type
ipvsadm -a -t ${vip}:${port} -r ${rs2} $type
;;
stop)
ipvsadm -C
ifconfig $iface down
;;
*)
echo "Usage $(basename $0) start|stop“;exit 1"
;;
esac

ipvs.sh脚本两台lvsserver都要执行

构建keepalive(单主模型，会出现单点失败)

vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived

global_defs {
   notification_email {
     root@localhost
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 192.168.200.1（邮件服务器地址）
   smtp_connect_timeout 30（邮件服务器连接市场）
   router_id LVS_DEVEL
   vrrp_mcast_group4 224.26.100.19 （发送组播地址，判断vrrp是否成功获取地址）
}

vrrp_instance VI_1 {
    state MASTER
    interface ens32
    virtual_router_id 50
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.192.11
    }
}

    virtual_server 192.168.192.11 80 {
        delay_loop 1
        lb_algo rr
        lb_kind DR
        protocol TCP
        sorry_server 127.0.0.1 80（添加sorry）

    real_server 192.168.192.105 80 {
        weight 1 （权重）
        HTTP_GET {
            url {
              path /
                status_code 200（状态相应码为check信息）
            }
            }
            connect_timeout 1
            nb_get_retry 1
            delay_before_retry 3
        }
    }
    real_server 192.168.192.138 80 {
        weight 1
        HTTP_GET {
            url {
              path /
                status_code 200
            }
            }
            connect_timeout 1
            nb_get_retry 1
            delay_before_retry 3
        }
}
在lvsserver2上配置
    vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived

global_defs {
   notification_email {
     root@localhost
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 192.168.200.1（邮件服务器地址）
   smtp_connect_timeout 30（邮件服务器连接市场）
   router_id LVS_DEVEL
   vrrp_mcast_group4 224.26.100.19 （发送组播地址，判断vrrp是否成功获取地址）
}

vrrp_instance VI_1 {
    state BACKUP
    interface ens32
    virtual_router_id 50
    priority 99
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.192.11
    }
}

    virtual_server 192.168.192.11 80 {
        delay_loop 1
        lb_algo rr
        lb_kind DR
        protocol TCP
        sorry_server 127.0.0.1 80（添加sorry）

    real_server 192.168.192.105 80 {
        weight 1 （权重）
        HTTP_GET {
            url {
              path /
                status_code 200（状态相应码为check信息）
            }
            }
            connect_timeout 1
            nb_get_retry 1
            delay_before_retry 3
        }
    }
    real_server 192.168.192.138 80 {
        weight 1
        HTTP_GET {
            url {
              path /
                status_code 200
            }
            }
            connect_timeout 1
            nb_get_retry 1
            delay_before_retry 3
        }
}

双主模型

在lvsserver1上配置

vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived

global_defs {
   notification_email {
     root@localhost
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 192.168.200.1（邮件服务器地址）
   smtp_connect_timeout 30（邮件服务器连接市场）
   router_id LVS_DEVEL
   vrrp_mcast_group4 224.26.100.19 （发送组播地址，判断vrrp是否成功获取地址）
}

vrrp_instance VI_1 {
    state MASTER
    interface ens32
    virtual_router_id 50
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.192.11
    }
}
    vrrp_instance VI_2 {
    state BACKUP
    interface ens32
    virtual_router_id 51
    priority 95
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 2222
    }
    virtual_ipaddress {
        192.168.192.22
    }
track_interface {
        ens32
        }
        notify_master "/etc/keepalived/notify.sh master"
        notify_backup "/etc/keepalived/notify.sh backup"
        notify_fault "/etc/keepalived/notify.sh fault"
        }
}

    virtual_server 192.168.192.11 80 {
        delay_loop 1
        lb_algo rr
        lb_kind DR
        protocol TCP
        sorry_server 127.0.0.1 80（添加sorry）

    real_server 192.168.192.105 80 {
        weight 1 （权重）
        HTTP_GET {
            url {
              path /
                status_code 200（状态相应码为check信息）
            }
            }
            connect_timeout 1
            nb_get_retry 1
            delay_before_retry 3
        }
    }
    real_server 192.168.192.138 80 {
        weight 1
        HTTP_GET {
            url {
              path /
                status_code 200
            }
            }
            connect_timeout 1
            nb_get_retry 1
            delay_before_retry 3
        }
}

在lvsserver2上配置

vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived

global_defs {
   notification_email {
     root@localhost
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 192.168.200.1（邮件服务器地址）
   smtp_connect_timeout 30（邮件服务器连接市场）
   router_id LVS_DEVEL
   vrrp_mcast_group4 224.26.100.19 （发送组播地址，判断vrrp是否成功获取地址）
}

vrrp_instance VI_1 {
    state BACKUP
    interface ens32
    virtual_router_id 50
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.192.11
    }
}
    vrrp_instance VI_2 {
    state MASTER
    interface ens32
    virtual_router_id 51
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 2222
    }
    virtual_ipaddress {
        192.168.192.22
    }
track_interface {
        ens32
        }
        notify_master "/etc/keepalived/notify.sh master"
        notify_backup "/etc/keepalived/notify.sh backup"
        notify_fault "/etc/keepalived/notify.sh fault"
        }
}

    virtual_server 192.168.192.11 80 {
        delay_loop 1
        lb_algo rr
        lb_kind DR
        protocol TCP
        sorry_server 127.0.0.1 80（添加sorry）

    real_server 192.168.192.105 80 {
        weight 1 （权重）
        HTTP_GET {
            url {
              path /
                status_code 200（状态相应码为check信息）
            }
            }
            connect_timeout 1
            nb_get_retry 1
            delay_before_retry 3
        }
    }
    real_server 192.168.192.138 80 {
        weight 1
        HTTP_GET {
            url {
              path /
                status_code 200
            }
            }
            connect_timeout 1
            nb_get_retry 1
            delay_before_retry 3
        }
}

通知脚本

#!/bin/bash
contact='root@localhost'
notify() {
    local mailsubject="$(hostname) to be $1, vip floating"
    local mailbody="$(date +'%F %T'): vrrp transition, $(hostname) changed to be $1"
    echo "$mailbody" | mail -s "$mailsubject" $contact
}
case $1 in
master)
        notify master
        ;;      
backup)
        notify backup
;;
fault)
        notify fault
;;
*)        echo "Usage: $(basename $0) {master|backup|fault}"
        exit 1
;;
esac

这个脚本上面在配置文件中已经进行调用，这里不再解释。

网友评论

本文标题：Linux项目之LVS构建keepalive站点

本文链接：https://www.haomeiwen.com/subject/mppysxtx.html

延伸阅读

深度阅读

您也可以注册成为美文阅读网的作者，发表您的原创作品、分享您的心情！