Docker启动时的报错汇总

作者: CaiGuangyin | 来源:发表于2017-11-10 16:30 被阅读5083次

Docker启动时的报错汇总
Docker 启动时报错：iptables:No chain/t
2020-02-27 Docker 不启动 centos,报错S
docker后，启动时报错
IPv4 forwarding is disabled. Net
Docker 启动时报错：iptables:No chain/t
Docker容器启动时报错ERROR: for elastics
docker 常见错误
启动docker容器报错 driver failed progr
jenkins容器中实现挂载docker

报错一：error initializing graphdriver

Docker启动报错

系统是CentOS 7.2
系统内核及docker版本如下：

[root@docker ~]# uname -r
3.10.0-327.el7.x86_64
[root@docker ~]# 
[root@docker ~]# 
[root@docker ~]# 
[root@docker ~]# docker version
Client:
 Version:   18.04.0-ce
 API version:   1.37
 Go version:    go1.9.4
 Git commit:    3d479c0
 Built: Tue Apr 10 18:21:36 2018
 OS/Arch:   linux/amd64
 Experimental:  false
 Orchestrator:  swarm

Server:
 Engine:
  Version:  18.04.0-ce
  API version:  1.37 (minimum version 1.12)
  Go version:   go1.9.4
  Git commit:   3d479c0
  Built:    Tue Apr 10 18:25:25 2018
  OS/Arch:  linux/amd64
  Experimental: false

启动报错提示如下：

[root@docker ~]# systemctl start docker
Job for docker.service failed because the control process exited with error code. See "systemctl status docker.service" and "journ
[root@docker ~]# 
[root@docker ~]# 
[root@docker ~]# 
[root@docker ~]# systemctl status docker
● docker.service - Docker Application Container Engine
   Loaded: loaded (/usr/lib/systemd/system/docker.service; disabled; vendor preset: disabled)
   Active: failed (Result: start-limit) since 日 2018-04-22 20:52:39 CST; 5s ago
     Docs: https://docs.docker.com
  Process: 4810 ExecStart=/usr/bin/dockerd (code=exited, status=1/FAILURE)
 Main PID: 4810 (code=exited, status=1/FAILURE)

4月 22 20:52:39 docker.cgy.com systemd[1]: Failed to start Docker Application Container Engine.
4月 22 20:52:39 docker.cgy.com systemd[1]: Unit docker.service entered failed state.
4月 22 20:52:39 docker.cgy.com systemd[1]: docker.service failed.
4月 22 20:52:39 docker.cgy.com systemd[1]: docker.service holdoff time over, scheduling restart.
4月 22 20:52:39 docker.cgy.com systemd[1]: start request repeated too quickly for docker.service
4月 22 20:52:39 docker.cgy.com systemd[1]: Failed to start Docker Application Container Engine.
4月 22 20:52:39 docker.cgy.com systemd[1]: Unit docker.service entered failed state.
4月 22 20:52:39 docker.cgy.com systemd[1]: docker.service failed.

从以上报错提示信息中也没看到错误的具体原因。然后我又用dockerd来直接启动，就在输出信息最下面看到一条错误提示，如下：

[root@docker ~]# dockerd
INFO[2018-04-22T21:12:46.111704443+08:00] libcontainerd: started new docker-containerd process  pid=5903
INFO[0000] starting containerd                           module=containerd revision=773c489c9c1b21a6d78b5c538cd395416ec50f88 version=v1.0.3

。。。。。。省略一部分输出。。。。。。

INFO[0000] loading plugin "io.containerd.grpc.v1.introspection"...  module=containerd type=io.containerd.grpc.v1
INFO[0000] serving...                                    address="/var/run/docker/containerd/docker-containerd-debug.sock" module="containerd/debug"
INFO[0000] serving...                                    address="/var/run/docker/containerd/docker-containerd.sock" module="containerd/grpc"
INFO[0000] containerd successfully booted in 0.002763s   module=containerd
Error starting daemon: error initializing graphdriver: overlay: the backing xfs filesystem is formatted without d_type support, which leads to incorrect behavior. Reformat the filesystem with ftype=1 to en d_type support. Backing filesystems without d_type support are not supported.

根据最后的报错Error starting daemon:搜索到这篇博客，得到解决。
https://blog.csdn.net/liu9718214/article/details/79134900

具体解决办法是：

vim /etc/sysconfig/docker
加入如下：

OPTIONS="--selinux-enabled --log-driver=journald --signature-verification=false"

/etc/docker/daemon.json
加入如下内容：

{
    "registry-mirrors": ["http://4a1df5ef.m.daocloud.io"],   # 是用来pull容器加速用的，跟此次问题无关。
    "storage-driver": "devicemapper"    # 解决此次问题
}

然后重启docker，顺利解决：

[root@docker ~]# systemctl restart docker
[root@docker ~]# 
[root@docker ~]# 
[root@docker ~]# ps aux | grep docker
root       5922  1.7  1.6 528432 62568 ?        Ssl  21:15   0:00 /usr/bin/dockerd
root       5927  1.1  0.5 356984 22100 ?        Ssl  21:15   0:00 docker-containerd --config /var/run/docker/containerd/containerd.toml
root       6028  0.0  0.0 112664   964 pts/0    S+   21:15   0:00 grep --color=auto docker

报错二：iptables failed

FirewallD

CentOS-7 中介绍了 firewalld，firewall的底层是使用iptables进行数据过滤，建立在iptables之上，这可能会与 Docker 产生冲突。

当 firewalld 启动或者重启的时候，将会从 iptables 中移除 DOCKER 的规则，从而影响了 Docker 的正常工作。

当你使用的是 Systemd 的时候， firewalld 会在 Docker 之前启动，但是如果你在 Docker 启动之后再启动或者重启 firewalld ，你就需要重启 Docker 进程了。

系统：

[root@controller ~]# cat /etc/redhat-release 
CentOS Linux release 7.0.1406 (Core)

报错提示如下：

[root@controller ~]# docker run -it -P docker.io/nginx
/usr/bin/docker-current: Error response from daemon: driver failed programming external connectivity on endpoint gloomy_kirch (10289e7a87e65771da90cda531951b7339bee9cb5953474460451cd48013aff0): iptables failed: iptables --wait -t nat -A DOCKER -p tcp -d 0/0 --dport 32810 -j DNAT --to-destination 172.17.0.2:80 ! -i docker0: iptables: No chain/target/match by that name.
 (exit status 1).

这是由于在运行这次容器之前，成功启动过一次，在上次访问时，因为防火墙的问题导致不能正常访问Nginx，所以将iptables的filter表清空了，并且重启过iptables，然后再次运行时，就报了以上错误。

解决办法

重启防火墙

#CentOS 7下执行
[root@controller ~]# systemctl restart firewalld

再重启docker守护进程即可

[root@controller ~]# systemctl restart docker

再次在容器中运行一个nginx就不会报错了

[root@controller ~]# docker run -it --name nginx -p 80:80 -v /www:/wwwroot docker.io/nginx /bin/bash
root@a8a92c8f7760:/#

报错三 : Unable to take ownership of thin-pool

docker daemon启动失败：Unable to take ownership of thin-pool

Apr 27 13:51:59 master systemd: Started Docker Storage Setup.
Apr 27 13:51:59 master systemd: Starting Docker Application Container Engine...
Apr 27 13:51:59 master dockerd-current: time="2018-04-27T13:51:59.088441356+08:00" level=warning msg="could not change group /var/run/docker.sock to docker: group docker not found"
Apr 27 13:51:59 master dockerd-current: time="2018-04-27T13:51:59.091166189+08:00" level=info msg="libcontainerd: new containerd process, pid: 20930"
Apr 27 13:52:00 master dockerd-current: Error starting daemon: error initializing graphdriver: devmapper: Unable to take ownership of thin-pool (docker--vg-docker--pool) that already has used data blocks
Apr 27 13:52:00 master systemd: docker.service: main process exited, code=exited, status=1/FAILURE
Apr 27 13:52:00 master systemd: Failed to start Docker Application Container Engine.
Apr 27 13:52:00 master systemd: Unit docker.service entered failed state.
Apr 27 13:52:00 master systemd: docker.service failed

原因： /var/lib/docker/devicemapper/metadata/ 内metadata丢失

workaround：

https://bugzilla.redhat.com/show_bug.cgi?id=1321640#c5

Eric Paris 2016-04-27 08:20:10 EDT

I feel like the kcs kinda misses telling users the actual problem. Nor does it really make it clear the solution.

IF you are using device mapper (instead of loopback) /var/lib/docker contains metadata informing docker about the contents of the device mapper storage area. If you delete /var/lib/docker that metadata is lost. Docker is then able to detect that the thin pool has data but docker is unable to make use of that information. The only solution is to delete the thin pool and recreate it so that both the thin pool and the metadata in /var/lib/docker will be empty.

解决办法：

执行命令：rm -rf /var/lib/docker/*
执行命令：rm -rf /etc/sysconfig/docker-storage
执行命令：lvremove /dev/docker-vg/docker-pool
使用现有的docker-vg LVM卷组：

cat <<EOF > /etc/sysconfig/docker-storage-setup
VG=docker-vg
EOF

执行命令：docker-storage-setup
重启docker即可：systemctl start docker

Docker启动时的报错汇总
报错一：error initializing graphdriver Docker启动报错系统是CentOS 7...
Docker 启动时报错：iptables:No chain/t
今天docker启动时发现docker出错了，iptables报错，没法启动docker，后来仔细找了一下原因，发...
2020-02-27 Docker 不启动 centos,报错S
装好，，启动时候显示错误如下报错：Job for docker.service failed because t...
docker后，启动时报错
yum安装docker后，启动时报错，systemctl status docker信息如下很奇怪的是这一行两...
IPv4 forwarding is disabled. Net
docker 启动了一个web服务，但是启动时报错： Step 3/11 : RUN apt-get update...
Docker 启动时报错：iptables:No chain/t
可能是重启防火墙带来的iptables丢失，重启docker服务
Docker容器启动时报错ERROR: for elastics
太阳一出红似火，二八佳人把胭脂抹，越抹越红，越红越抹在用脚本启动docker时出现了以下错误错误原因： doc...
docker 常见错误
Docker安装完启动时提示Failed to start docker.service: Unit docekr...
启动docker容器报错 driver failed progr
问题：启动docker容器报错；报错信息如下原因： docker 服务启动的时候，docker服务会向ipta...
jenkins容器中实现挂载docker
1、启动时配置目录挂载docker.sock： docker run -di --name jenkins -p ...

Docker启动时的报错汇总

报错一：error initializing graphdriver

Docker启动报错

报错二：iptables failed

FirewallD

系统：

报错提示如下：

解决办法

再次在容器中运行一个nginx就不会报错了

报错三 : Unable to take ownership of thin-pool

解决办法：

相关文章

Docker启动时的报错汇总

Docker 启动时报错：iptables:No chain/t

2020-02-27 Docker 不启动 centos,报错S

docker后，启动时报错

IPv4 forwarding is disabled. Net

Docker 启动时报错：iptables:No chain/t

Docker容器启动时报错ERROR: for elastics

docker 常见错误

启动docker容器报错 driver failed progr

jenkins容器中实现挂载docker

网友评论

延伸阅读

深度阅读

栏目导航

热点阅读

我的收藏