VDS超级节点搭建过程中遇到好多问题。研究程序从配置项开始，翻译了一部分，有时间再继续翻译。
##
## vds.conf configuration file. Lines beginning with # are comments.
##
# Network-related settings:
# Run on the test network instead of the real vds network.
# 在测试网络上运行而不是在现网上运行。保持默认即可。
#testnet=0
# Run a regression test network 运行回归测试网络。不知道是什么鬼，超节的话不需要修改这个值，保持默认吧。
#regtest=0
# Connect via a SOCKS5 proxy 通过socks5代理接入。通过代理上网的可以打开这个配置项。
#proxy=127.0.0.1:9050
# Bind to given address and always listen on it. Use [host]:port notation for IPv6
# 绑定并监听指定的地址。ipv6网络使用[主机ip]:端口表示法。
#bind=<addr>
# Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6
# 绑定到指定地址并且白名单节点连接到该地址。ipv6网络使用[主机ip]:端口表示法。
#whitebind=<addr>
##############################################################
## Quick Primer on addnode vs connect ## addnode 和 connect快速入门
## Let's say for instance you use addnode=4.2.2.4 ## 假设你使用addnode=4.2.2.4，以此为例。
## addnode will connect you to and tell you about the ## addnode会将你连接到4.2.2.4并告诉你所有连接到4.2.2.4的节点。
## nodes connected to 4.2.2.4. In addition it will tell ## 此外它会告诉其他节点4.2.2.4这个地址是存在的，以便他们就可以连接到你。
## the other nodes connected to it that you exist so ##
## they can connect to you. ##
## connect will not do the above when you 'connect' to it. ## connect 命令在你执行‘connect’操作前不会做上述动作。它仅仅连接你到4.2.2.4不会连接其他。
## It will *only* connect you to 4.2.2.4 and no one else.##
## ##
## So if you're behind a firewall, or have other problems ## 因此如果你在防火墙后面或因其他困难找不到节点的话，试试addnode命令吧。
## finding nodes, add some using 'addnode'. ## （国内无法连接绝大多数国外节点）
## ##
## If you want to stay private, use 'connect' to only ## 如果你想保持私密性，使用connect来连接你只信任的节点。
## connect to "trusted" nodes. ##
## ##
## If you run multiple nodes on a LAN, there's no need for ## 如果你在局域网中运行了多个节点，那就不需要所有的节点都打开大量的连接。
## all of them to open lots of connections. Instead ##
## 'connect' them all to one node that is port forwarded ## 相反，将它们“连接”到一个节点上，该节点是端口转发的，具有大量连接。
## and has lots of connections. ##
## Thanks goes to [Noodle] on Freenode. ## 感谢去Noodle网站上获取免费的节点吧
##############################################################
# Use as many addnode= settings as you like to connect to specific peers
# 使用多个 addnode= 设置来连接到指定的对等节点。
#addnode=69.164.218.197
#addnode=10.0.0.2:8233
addnode=139.9.244.182
addnode=183.71.0.34
# Alternatively use as many connect= settings as you like to connect ONLY to specific peers
# 或者使用任意多的connect=settings只连接到特定的对等端。 （connect只连接信任的节点）
#connect=69.164.218.197
#connect=10.0.0.1:8233
# Listening mode, enabled by default except when 'connect' is being used
# 监听模式，默认启用，如果connect启用了，则自动禁用该模式。
#listen=1
# Maximum number of inbound+outbound connections.
# 连入+连出节点最大值。（这里建议不配置，由系统调度吧。配置少了收益少，配置大了机器可能拖不动。）
#maxconnections=
#
# JSON-RPC options (for controlling a running Vds/vdsd process)
# json-rpc选项（用于控制正在运行的vds/vdsd进程）
#
#
# server=1 tells vdsd to accept JSON-RPC commands (set as default if not specified)
# server=1通知vdsd接受json-rpc命令（如果未指定，则设置为默认值）
#server=1
# Bind to given address to listen for JSON-RPC connections. Use [host]:port notation for IPv6.
# 绑定到给定地址以侦听JSON-RPC连接。使用[主机]：IPv6的端口表示法。
# This option can be specified multiple times (default: bind to all interfaces)
# 可以多次指定此选项（默认：绑定到所有接口）
#rpcbind=<addr>
# You must set rpcuser and rpcpassword to secure the JSON-RPC api
# 必须设置rpcuser和rpcpassword以保护json-rpc API
#rpcuser=Ulysses
# 注意启用后密码改成你自己的密码。
#rpcpassword=YourSuperGreatPasswordNumber_DO_NOT_USE_THIS_OR_YOU_WILL_GET_ROBBED_385593
# How many seconds vds will wait for a complete RPC HTTP request.
# after the HTTP connection is established.
# 建立HTTP连接后，VDS将等待完整的RPC HTTP请求的秒数。
#rpcclienttimeout=30
# By default, only RPC connections from localhost are allowed.
# Specify as many rpcallowip= settings as you like to allow connections from other hosts,
# either as a single IPv4/IPv6 or with a subnet specification.
# NOTE: opening up the RPC port to hosts outside your local trusted network is NOT RECOMMENDED,
# because the rpcpassword is transmitted over the network unencrypted and also because anyone
# that can authenticate on the RPC port can steal your keys + take over the account running vdsd
# For more information see https://github.com/vds/vds/issues/1497
#rpcallowip=10.1.1.34/255.255.255.0
#rpcallowip=1.2.3.4/24
#rpcallowip=2001:db8:85a3:0:0:8a2e:370:7334/96
# Listen for RPC connections on this TCP port:
#rpcport=8232
# You can use Vds or vdsd to send commands to Vds/vdsd
# running on another host using this option:
#rpcconnect=127.0.0.1
# Transaction Fee
# Send transactions as zero-fee transactions if possible (default: 0)
#sendfreetransactions=0
# Create transactions that have enough fees (or priority) so they are likely to # begin confirmation within n blocks (default: 1).
# This setting is overridden by the -paytxfee option.
#txconfirmtarget=n
# Miscellaneous options
# Enable attempt to mine vds.
#gen=0
# Set the number of threads to be used for mining vds (-1 = all cores).
#genproclimit=1
# Pre-generate this many public/private key pairs, so wallet backups will be valid for
# both prior transactions and several dozen future transactions.
#keypool=100
# Pay an optional transaction fee every time you send vds. Transactions with fees
# are more likely than free transactions to be included in generated blocks, so may
# be validated sooner. This setting does not affect private transactions created with
# 'z_sendmany'.
#paytxfee=0.00
seednode=95.183.55.251
seednode=27.102.113.133
seednode=46.28.207.161
seednode=109.236.86.26
seednode=23.106.215.127
seednode=103.78.133.59
seednode=23.106.215.132
seednode=103.108.236.125
seednode=103.78.133.65
================================
朋友圈火爆的VDS是什么项目？
VDS是什么？为什么做EXP、ADB的都在选择？
现在有人做VDS吗？
VDS是传销吗？是骗局吗？
VDS是什么时候出来的？
VDS是区块链骗局吗？
VDS解决那些区块技术？
VDS上线了那些国际交易所？
如何获得Vollar，玩转VDS详解？
12大优势说明VDS是什么
为什么选择FN的人都选择VDS？
如何区分VDS是骗局？
VDS是区块链传销吗？
VDS项目和Vollar币的价值前景？
VDS如何赚钱的如何快速获得Vollar
VDS如何防骗
网友评论