发币代码片段

作者: 童蒙vlog | 来源:发表于2018-05-29 19:38 被阅读8次
pragma solidity ^0.4.19;

import "./safemath.sol";

interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) external; }

contract TokenERC20{
    using SafeMath for uint256;
    // Public variables of the token
    string public name;
    string public symbol;
    uint8 public decimals = 18;
    // 18 decimals is the strongly suggested default, avoid changing it
    uint256 public totalSupply;

    // This creates an array with all balances
    mapping (address => uint256) public balanceOf;
    mapping (address => mapping (address => uint256)) public allowance;

    // This generates a public event on the blockchain that will notify clients
    event Transfer(address indexed from, address indexed to, uint256 value);

    // This notifies clients about the amount burnt
    event Burn(address indexed from, uint256 value);

    /**
     * Constructor function
     *
     * Initializes contract with initial supply tokens to the creator of the contract
     */
    constructor(
        uint256 initialSupply,
        string tokenName,
        string tokenSymbol
    ) public {
        totalSupply = initialSupply * 10 ** uint256(decimals);  // Update total supply with the decimal amount
        balanceOf[msg.sender] = totalSupply;                // Give the creator all initial tokens
        name = tokenName;                                   // Set the name for display purposes
        symbol = tokenSymbol;                               // Set the symbol for display purposes
    }

    /**
     * Internal transfer, only can be called by this contract
     */
    function _transfer(address _from, address _to, uint _value) internal {
        // Prevent transfer to 0x0 address. Use burn() instead
        require(_to != 0x0);
        // Check if the sender has enough
        require(balanceOf[_from] >= _value);
        // Check for overflows
        require(balanceOf[_to].add(_value) >= balanceOf[_to]);
        // Save this for an assertion in the future
        uint previousBalances = balanceOf[_from].add(balanceOf[_to]);
        // Subtract from the sender
        balanceOf[_from] = balanceOf[_from].sub(_value);
        // Add the same to the recipient
        balanceOf[_to] = balanceOf[_to].add(_value);
        emit Transfer(_from, _to, _value);
        // Asserts are used to use static analysis to find bugs in your code. They should never fail
        assert(balanceOf[_from].add(balanceOf[_to]) == previousBalances);
    }

    /**
     * Transfer tokens
     *
     * Send `_value` tokens to `_to` from your account
     *
     * @param _to The address of the recipient
     * @param _value the amount to send
     */
    function transfer(address _to, uint256 _value) public {
        _transfer(msg.sender, _to, _value);
    }

    /**
     * Transfer tokens from other address
     *
     * Send `_value` tokens to `_to` on behalf of `_from`
     *
     * @param _from The address of the sender
     * @param _to The address of the recipient
     * @param _value the amount to send
     */
    function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
        require(_value <= allowance[_from][msg.sender]);     // Check allowance
        allowance[_from][msg.sender] = allowance[_from][msg.sender].sub(_value);
        _transfer(_from, _to, _value);
        return true;
    }

    /**
     * Set allowance for other address
     *
     * Allows `_spender` to spend no more than `_value` tokens on your behalf
     *
     * @param _spender The address authorized to spend
     * @param _value the max amount they can spend
     */
    function approve(address _spender, uint256 _value) public
        returns (bool success) {
        allowance[msg.sender][_spender] = _value;
        return true;
    }

    /**
     * Set allowance for other address and notify
     *
     * Allows `_spender` to spend no more than `_value` tokens on your behalf, and then ping the contract about it
     *
     * @param _spender The address authorized to spend
     * @param _value the max amount they can spend
     * @param _extraData some extra information to send to the approved contract
     */
    function approveAndCall(address _spender, uint256 _value, bytes _extraData)
        public
        returns (bool success) {
        tokenRecipient spender = tokenRecipient(_spender);
        if (approve(_spender, _value)) {
            spender.receiveApproval(msg.sender, _value, this, _extraData);
            return true;
        }
    }

    /**
     * Destroy tokens
     *
     * Remove `_value` tokens from the system irreversibly
     *
     * @param _value the amount of money to burn
     */
    function burn(uint256 _value) public returns (bool success) {
        require(balanceOf[msg.sender] >= _value);   // Check if the sender has enough
        balanceOf[msg.sender] = balanceOf[msg.sender].sub(_value); // // Subtract from the sender
        totalSupply = totalSupply.sub(_value); // // Updates totalSupply
        emit Burn(msg.sender, _value);
        return true;
    }

    /**
     * Destroy tokens from other account
     *
     * Remove `_value` tokens from the system irreversibly on behalf of `_from`.
     *
     * @param _from the address of the sender
     * @param _value the amount of money to burn
     */
    function burnFrom(address _from, uint256 _value) public returns (bool success) {
        require(balanceOf[_from] >= _value);                // Check if the targeted balance is enough
        require(_value <= allowance[_from][msg.sender]);    // Check allowance
        balanceOf[_from] = balanceOf[_from].sub(_value);  // Subtract from the targeted balance
        allowance[_from][msg.sender] = allowance[_from][msg.sender].sub(_value);  // Subtract from the sender's allowance
        totalSupply = totalSupply.sub(totalSupply);    // Update totalSupply
        emit Burn(_from, _value);
        return true;
    }
}

safemath.sol

相关文章

  • 发币代码片段

    safemath.sol

  • 提高iOS开发效率的方法

    参考唐巧《iOS开发进阶》 211页中的内容,自己有感而发。 使用代码片段 管理自己的代码复用片段是非常非常好的提...

  • Xcode代码块

    代码片段 Xcode的代码片段(Code Snippets)创建自定义的代码片段,当你重用这些代码片段时,会给你带...

  • vscode 代码片段设置

    文件-首选项-用户片段 选择新建代码片段 打印代码片段

  • 代码片段&编程小技巧

    代码片段大全代码片段,代码分享,PHP代码分享,Java代码分享,Ruby代码分享,Python代码分享,HTML...

  • 代码片段

    消除table中的th除去了所有border,margin,padding之后还是会有间隙的问题 移动端必须加的代...

  • 代码片段

    简介: 关于代码片段,网上已经有很多资料了,这里主要介绍下结合zyApi如何快速的写出请求模版。 实现: 上面三份...

  • 代码片段

    for循环和迭代器 在判断一个数组中是否包含某个值的时候,开发者经常这样做: 推荐使用for循环遍历的形式或者使用...

  • 代码片段

    单例模式 获取Keystore 证书指纹

  • 代码片段

    目录: 找到手机上所有安装的浏览器信息 对TextView更改字体 ListView 使用BaseAdapter的...

网友评论

    本文标题:发币代码片段

    本文链接:https://www.haomeiwen.com/subject/uioajftx.html