一、介绍
BMP180气压计是新型数字气压传感器，具有非常高的性能，可用于高级移动设备，如智能手机，平板电脑和运动设备。它兼容BMP085传感器，但是在该基础上拥有许多改进，如更小的尺寸和更多的数字接口。
BMP180不仅可以实时的测量大气压力，还能测量实时温度。同时它还具有IIC总线的接口，便于单片机进行访问。另外它的使用也很方便，不需要太多的操作就可读取到气压及测量数据。
其它I2C总线实验可以查看前面的PCF8591相关实验，如：
树莓派基础实验12：PCF8591模数转换器实验
二、组件
★Raspberry Pi主板*1
★树莓派电源*1
★40P软排线*1
★BMP180气压传感器模块*1
★面包板*1
★跳线若干
三、实验原理
BMP180气压传感器
BMP180大气压检测传感器模块原理图
四、实验步骤
第1步：连接电路。
| 树莓派 | T型转接板 | BMP180气压传感器 |
|---|---|---|
| SCL | SCL | SCL |
| SDA | SDA | SDA |
| 3.3V | 3.3V | VCC |
| GND | GND | GND |
BMP180气压传感器实验电路图
BMP180气压传感器实验实物接线图
第2步：PCF8591模块采用的是I2C（IIC）总线进行通信的，但是在树莓派的镜像中默认是关闭的，在使用该传感器的时候，我们必须首先允许IIC总线通信。
打开I2C总线通信
第3步：查询LCD1602的地址。得出地址为0x77。
pi@raspberrypi:~ $ sudo i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- 77
第4步：编写驱动程序。这里需要下载安装库函数，核心是BMP085.py文件，后面编写一个python控制程序时引入这个库文件，调用这个文件中的函数实现更复杂的功能。
该库函数来自：
https://github.com/adafruit/Adafruit_Python_BMP/
Adafruit_Python_BMP
这是由Adafruit Industries公司制作的Python库，在该地址可以将整个Adafruit_Python_BMP文件夹下载使用。该公司成立于2005年，创始人是来自麻省理工学院的女工程师Limor，目标是打造一个学习电子产品相关知识和为各个年龄阶段与技能水平不等的客户设计产品的场所。总部位于美国纽约的中心区。
Limor
第5步：安装I2C的smbus及一些实用程序。
pi@raspberrypi:~ $ sudo apt-get install python-smbus i2c-tools
pi@raspberrypi:~ $ sudo apt-get install build-essential python-dev
第6步：将下载的整个Adafruit_Python_BMP文件夹复制到Pi目录下，进入Adafruit_Python_BMP目录，安装BMP的操作库：
pi@raspberrypi:~ $ cd Adafruit_Python_BMP/
pi@raspberrypi:~/Adafruit_Python_BMP $ sudo python setup.py install
该文件夹下有一些参考资料，BMP085.py文件就在第二个文件夹Adafruit_BMP里面：
Adafruit_Python_BMP目录
下面是核心文件BMP085.py的代码，供深入研究的同学参考：
# Copyright (c) 2014 Adafruit Industries
# Author: Tony DiCola
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
import logging
import time
# BMP085 default address.
BMP085_I2CADDR = 0x77
# Operating Modes
BMP085_ULTRALOWPOWER = 0
BMP085_STANDARD = 1
BMP085_HIGHRES = 2
BMP085_ULTRAHIGHRES = 3
# BMP085 Registers
BMP085_CAL_AC1 = 0xAA # R Calibration data (16 bits)
BMP085_CAL_AC2 = 0xAC # R Calibration data (16 bits)
BMP085_CAL_AC3 = 0xAE # R Calibration data (16 bits)
BMP085_CAL_AC4 = 0xB0 # R Calibration data (16 bits)
BMP085_CAL_AC5 = 0xB2 # R Calibration data (16 bits)
BMP085_CAL_AC6 = 0xB4 # R Calibration data (16 bits)
BMP085_CAL_B1 = 0xB6 # R Calibration data (16 bits)
BMP085_CAL_B2 = 0xB8 # R Calibration data (16 bits)
BMP085_CAL_MB = 0xBA # R Calibration data (16 bits)
BMP085_CAL_MC = 0xBC # R Calibration data (16 bits)
BMP085_CAL_MD = 0xBE # R Calibration data (16 bits)
BMP085_CONTROL = 0xF4
BMP085_TEMPDATA = 0xF6
BMP085_PRESSUREDATA = 0xF6
# Commands
BMP085_READTEMPCMD = 0x2E
BMP085_READPRESSURECMD = 0x34
class BMP085(object):
def __init__(self, mode=BMP085_STANDARD, address=BMP085_I2CADDR, i2c=None, **kwargs):
self._logger = logging.getLogger('Adafruit_BMP.BMP085')
# Check that mode is valid.
if mode not in [BMP085_ULTRALOWPOWER, BMP085_STANDARD, BMP085_HIGHRES, BMP085_ULTRAHIGHRES]:
raise ValueError('Unexpected mode value {0}. Set mode to one of BMP085_ULTRALOWPOWER, BMP085_STANDARD, BMP085_HIGHRES, or BMP085_ULTRAHIGHRES'.format(mode))
self._mode = mode
# Create I2C device.
if i2c is None:
import Adafruit_GPIO.I2C as I2C
i2c = I2C
self._device = i2c.get_i2c_device(address, **kwargs)
# Load calibration values.
self._load_calibration()
def _load_calibration(self):
self.cal_AC1 = self._device.readS16BE(BMP085_CAL_AC1) # INT16
self.cal_AC2 = self._device.readS16BE(BMP085_CAL_AC2) # INT16
self.cal_AC3 = self._device.readS16BE(BMP085_CAL_AC3) # INT16
self.cal_AC4 = self._device.readU16BE(BMP085_CAL_AC4) # UINT16
self.cal_AC5 = self._device.readU16BE(BMP085_CAL_AC5) # UINT16
self.cal_AC6 = self._device.readU16BE(BMP085_CAL_AC6) # UINT16
self.cal_B1 = self._device.readS16BE(BMP085_CAL_B1) # INT16
self.cal_B2 = self._device.readS16BE(BMP085_CAL_B2) # INT16
self.cal_MB = self._device.readS16BE(BMP085_CAL_MB) # INT16
self.cal_MC = self._device.readS16BE(BMP085_CAL_MC) # INT16
self.cal_MD = self._device.readS16BE(BMP085_CAL_MD) # INT16
self._logger.debug('AC1 = {0:6d}'.format(self.cal_AC1))
self._logger.debug('AC2 = {0:6d}'.format(self.cal_AC2))
self._logger.debug('AC3 = {0:6d}'.format(self.cal_AC3))
self._logger.debug('AC4 = {0:6d}'.format(self.cal_AC4))
self._logger.debug('AC5 = {0:6d}'.format(self.cal_AC5))
self._logger.debug('AC6 = {0:6d}'.format(self.cal_AC6))
self._logger.debug('B1 = {0:6d}'.format(self.cal_B1))
self._logger.debug('B2 = {0:6d}'.format(self.cal_B2))
self._logger.debug('MB = {0:6d}'.format(self.cal_MB))
self._logger.debug('MC = {0:6d}'.format(self.cal_MC))
self._logger.debug('MD = {0:6d}'.format(self.cal_MD))
def _load_datasheet_calibration(self):
# Set calibration from values in the datasheet example. Useful for debugging the
# temp and pressure calculation accuracy.
self.cal_AC1 = 408
self.cal_AC2 = -72
self.cal_AC3 = -14383
self.cal_AC4 = 32741
self.cal_AC5 = 32757
self.cal_AC6 = 23153
self.cal_B1 = 6190
self.cal_B2 = 4
self.cal_MB = -32767
self.cal_MC = -8711
self.cal_MD = 2868
def read_raw_temp(self):
"""Reads the raw (uncompensated) temperature from the sensor."""
self._device.write8(BMP085_CONTROL, BMP085_READTEMPCMD)
time.sleep(0.005) # Wait 5ms
raw = self._device.readU16BE(BMP085_TEMPDATA)
self._logger.debug('Raw temp 0x{0:X} ({1})'.format(raw & 0xFFFF, raw))
return raw
def read_raw_pressure(self):
"""Reads the raw (uncompensated) pressure level from the sensor."""
self._device.write8(BMP085_CONTROL, BMP085_READPRESSURECMD + (self._mode << 6))
if self._mode == BMP085_ULTRALOWPOWER:
time.sleep(0.005)
elif self._mode == BMP085_HIGHRES:
time.sleep(0.014)
elif self._mode == BMP085_ULTRAHIGHRES:
time.sleep(0.026)
else:
time.sleep(0.008)
msb = self._device.readU8(BMP085_PRESSUREDATA)
lsb = self._device.readU8(BMP085_PRESSUREDATA+1)
xlsb = self._device.readU8(BMP085_PRESSUREDATA+2)
raw = ((msb << 16) + (lsb << 8) + xlsb) >> (8 - self._mode)
self._logger.debug('Raw pressure 0x{0:04X} ({1})'.format(raw & 0xFFFF, raw))
return raw
def read_temperature(self):
"""Gets the compensated temperature in degrees celsius."""
UT = self.read_raw_temp()
# Datasheet value for debugging:
#UT = 27898
# Calculations below are taken straight from section 3.5 of the datasheet.
X1 = ((UT - self.cal_AC6) * self.cal_AC5) >> 15
X2 = (self.cal_MC << 11) / (X1 + self.cal_MD)
B5 = X1 + X2
temp = ((B5 + 8) >> 4) / 10.0
self._logger.debug('Calibrated temperature {0} C'.format(temp))
return temp
def read_pressure(self):
"""Gets the compensated pressure in Pascals."""
UT = self.read_raw_temp()
UP = self.read_raw_pressure()
# Datasheet values for debugging:
#UT = 27898
#UP = 23843
# Calculations below are taken straight from section 3.5 of the datasheet.
# Calculate true temperature coefficient B5.
X1 = ((UT - self.cal_AC6) * self.cal_AC5) >> 15
X2 = (self.cal_MC << 11) / (X1 + self.cal_MD)
B5 = X1 + X2
self._logger.debug('B5 = {0}'.format(B5))
# Pressure Calculations
B6 = B5 - 4000
self._logger.debug('B6 = {0}'.format(B6))
X1 = (self.cal_B2 * (B6 * B6) >> 12) >> 11
X2 = (self.cal_AC2 * B6) >> 11
X3 = X1 + X2
B3 = (((self.cal_AC1 * 4 + X3) << self._mode) + 2) / 4
self._logger.debug('B3 = {0}'.format(B3))
X1 = (self.cal_AC3 * B6) >> 13
X2 = (self.cal_B1 * ((B6 * B6) >> 12)) >> 16
X3 = ((X1 + X2) + 2) >> 2
B4 = (self.cal_AC4 * (X3 + 32768)) >> 15
self._logger.debug('B4 = {0}'.format(B4))
B7 = (UP - B3) * (50000 >> self._mode)
self._logger.debug('B7 = {0}'.format(B7))
if B7 < 0x80000000:
p = (B7 * 2) / B4
else:
p = (B7 / B4) * 2
X1 = (p >> 8) * (p >> 8)
X1 = (X1 * 3038) >> 16
X2 = (-7357 * p) >> 16
p = p + ((X1 + X2 + 3791) >> 4)
self._logger.debug('Pressure {0} Pa'.format(p))
return p
def read_altitude(self, sealevel_pa=101325.0):
"""Calculates the altitude in meters."""
# Calculation taken straight from section 3.6 of the datasheet.
pressure = float(self.read_pressure())
altitude = 44330.0 * (1.0 - pow(pressure / sealevel_pa, (1.0/5.255)))
self._logger.debug('Altitude {0} m'.format(altitude))
return altitude
def read_sealevel_pressure(self, altitude_m=0.0):
"""Calculates the pressure at sealevel when given a known altitude in
meters. Returns a value in Pascals."""
pressure = float(self.read_pressure())
p0 = pressure / pow(1.0 - altitude_m/44330.0, 5.255)
self._logger.debug('Sealevel pressure {0} Pa'.format(p0))
return p0
第5步：编写控制程序。每隔一秒打印一次气压和温度数据，由于我的所在地为高海拔的拉萨，所以气压数据低一些。
打印显示气压和温度
实际控制程序比较简单了，如下：
#!/usr/bin/env python
#---------------------------------------------------------
#
# This is a program for Barometer Pressure Sensor
# Module. It could measure the pressure and temperature.
#
# This program depend on BMP085.py writted by
# Adafruit.
#
# Barometer Module Pi
# VCC ----------------- 3.3V
# GND ------------------ GND
# SCL ----------------- SCL1
# SDA ----------------- SDA1
#
#---------------------------------------------------------
import Adafruit_BMP.BMP085 as BMP085
import RPi.GPIO as GPIO
import time
def setup():
print '\n Barometer begins...'
def loop():
while True:
sensor = BMP085.BMP085()
temp = sensor.read_temperature() # Read temperature to veriable temp
pressure = sensor.read_pressure() # Read pressure to veriable pressure
print ''
print ' Temperature = {0:0.2f} C'.format(temp) # Print temperature保留小数点后两位
print ' Pressure = {0:0.2f} Pa'.format(pressure) # Print pressure
#字符串中大括号和其中的字符会被替换成传入 str.format() 的参数。
#字段名后允许可选的 ':' 和格式指令。{0:0.2f}保留小数点后两位
time.sleep(1)
print ''
def destory():
GPIO.cleanup() # Release resource
if __name__ == '__main__': # Program start from here
setup()
try:
loop()
except KeyboardInterrupt: # When 'Ctrl+C' is pressed, the child program destroy() will be executed.
destory()
其中使用的Python format 格式化函数详情参见：
https://www.runoob.com/python/att-string-format.html
树莓派套装
点击购买：
https://s.click.taobao.com/B1N2Ynv
扫描二维码购买：
树莓派套装购买二维码
网友评论