美文网首页
重装nginx时遇到的问题

重装nginx时遇到的问题

作者: writ | 来源:发表于2019-05-19 10:23 被阅读0次

    原文链接:https://segmentfault.com/a/1190000014027697

    起因

    之前在网上看文章提到说,通过apt-get的方式安装nginx,可能安装不是最新版本的情况,考虑到在Ubuntu下第一次安装nginx,以后肯定会有卸载重新安装新版本的需求,刚好刚开始学习nginx,索性练习下卸载重装的过程。


    安装

    使用Ubuntu下的包管理工具apt来安装nginx

    $ sudo apt-get install nginx
    

    卸载

    同样使用apt来卸载nginx

    $ sudo apt-get remove nginx
    

    sudo apt-get autoremove命令帮我们卸载不再需要的依赖包
    在这里我们卸载nginx相关的依赖包

    $ sudo apt-get autoremove
    

    删除nginx配置文件夹

    $ sudo rm -rf /etc/nginx
    

    重新安装nginx

    # 更新源
    $ sudo apt update
    $ sudo apt-get install nginx
    

    然而控制台报错:

    Job for nginx.service failed because the control process exited with error code. See "systemctl status nginx.service" and "journalctl -xe" for details.
    invoke-rc.d: initscript nginx, action "start" failed.
    dpkg: error processing package nginx-core (--configure):
     subprocess installed post-installation script returned error exit status 1
    dpkg: dependency problems prevent configuration of nginx:
     nginx depends on nginx-core (>= 1.10.3-0ubuntu0.16.04.2) | nginx-full (>= 1.10.3-0ubuntu0.16.04.2) | nginx-light (>= 1.10.3-0ubuntu0.16.04.2) | nginx-extras (>= 1.10.3-0ubuntu0.16.04.2); however:
      Package nginx-core is not configured yet.
      Package nginx-full is not installed.
      Package nginx-light is not installed.
      Package nginx-extras is not installed.
     nginx depends on nginx-core (<< 1.10.3-0ubuntu0.16.04.2.1~) | nginx-full (<< 1.10.3-0ubuntu0.16.04.2.1~) | nginx-light (<< 1.10.3-0ubuntu0.16.04.2.1~) | nginx-extras (<< 1.10.3-0ubuntu0.16.04.2.1~); however:
      Package nginx-core is not configured yet.
     No apport report written because the error message indicates its a followup error from a previous failure.
     Package nginx-full is not installed.
      Package nginx-light is not installed.
      Package nginx-extras is not installed.
    
    dpkg: error processing package nginx (--configure):
     dependency problems - leaving unconfigured
    Processing triggers for libc-bin (2.23-0ubuntu9) ...
    Errors were encountered while processing:
     nginx-core
     nginx
    E: Sub-process /usr/bin/dpkg returned an error code (1)
    

    查看nginx.service状态

    $ systemctl status nginx.service
    
    ● nginx.service - A high performance web server and a reverse proxy server
       Loaded: loaded (/lib/systemd/system/nginx.service; enabled; vendor preset: enabled)
       Active: failed (Result: exit-code) since Sat 2018-03-17 23:16:40 CST; 1min 18s ago
      Process: 26795 ExecStartPre=/usr/sbin/nginx -t -q -g daemon on; master_process on; (code=exited, status=1/FAILURE)
     Main PID: 18259 (code=exited, status=0/SUCCESS)
    
    Mar 17 23:16:40 VM-0-5-ubuntu systemd[1]: Starting A high performance web server and a reverse proxy server...
    Mar 17 23:16:40 VM-0-5-ubuntu nginx[26795]: nginx: [emerg] open() "/etc/nginx/nginx.conf" failed (2: No such file or direMar 17 23:16:40 VM-0-5-ubuntu nginx[26795]: nginx: configuration file /etc/nginx/nginx.conf test failed
    Mar 17 23:16:40 VM-0-5-ubuntu systemd[1]: nginx.service: Control process exited, code=exited status=1
    Mar 17 23:16:40 VM-0-5-ubuntu systemd[1]: Failed to start A high performance web server and a reverse proxy server.
    Mar 17 23:16:40 VM-0-5-ubuntu systemd[1]: nginx.service: Unit entered failed state.
    Mar 17 23:16:40 VM-0-5-ubuntu systemd[1]: nginx.service: Failed with result 'exit-code'.
    

    仔细看报错信息,获取到两个信息点:

    1. Package nginx-core is not configured yet.
    2. Package nginx-full/nginx-light/nginx-extras is not installed.

    于是上网搜,网上找说可能是apache占用了80端口导致报错

    查看端口占用情况

    $ sudo netstat -nlp
    
    Active Internet connections (only servers)
    Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
    tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      1287/sshd
    udp        0      0 0.0.0.0:68              0.0.0.0:*                           891/dhclient
    udp        0      0 172.21.0.5:123          0.0.0.0:*                           1231/ntpd
    udp        0      0 127.0.0.1:123           0.0.0.0:*                           1231/ntpd
    udp        0      0 0.0.0.0:123             0.0.0.0:*                           1231/ntpd
    udp6       0      0 :::123                  :::*                                1231/ntpd
    

    发现80端口没被占用,而且systemctl status nginx.service的提示信息也没提及80端口被占用,如果提示信息中说80端口被占用,可以执行以下两步试试:

    终止apache运行

    $ sudo service apache2 stop
    

    重新安装nginx

    $ sudo apt-get install nginx
    

    了解详细信息请看askubuntu上的提问


    上述情况与我的并不相符,于是换个思路,报错信息中提及nginx的配置文件不存在,思考为什么卸载重装nginx,却没有生成配置文件?
    和第一次安装的时候不一样,然后百度上搜nginx卸载重装后配置文件没有重新生成,找到了类似的问题,给出了如下的操纵步骤:

    卸载nginx不保留配置文件

    $ sudo apt-get --purge remove nginx
    
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    The following packages were automatically installed and are no longer required:
      fontconfig-config fonts-dejavu-core libfontconfig1 libgd3 libjbig0 libjpeg-turbo8 libjpeg8 libtiff5 libvpx3 libxpm4
      libxslt1.1 nginx-common nginx-core
    Use 'sudo apt autoremove' to remove them.
    The following packages will be REMOVED:
      nginx*
    0 upgraded, 0 newly installed, 1 to remove and 205 not upgraded.
    2 not fully installed or removed.
    After this operation, 37.9 kB disk space will be freed.
    Do you want to continue? [Y/n] y
    (Reading database ... 66386 files and directories currently installed.)
    Removing nginx (1.10.3-0ubuntu0.16.04.2) ...
    Setting up nginx-core (1.10.3-0ubuntu0.16.04.2) ...
    Job for nginx.service failed because the control process exited with error code. See "systemctl status nginx.service" and "journalctl -xe" for details.
    invoke-rc.d: initscript nginx, action "start" failed.
    dpkg: error processing package nginx-core (--configure):
     subprocess installed post-installation script returned error exit status 1
    Errors were encountered while processing:
     nginx-core
    E: Sub-process /usr/bin/dpkg returned an error code (1)
    

    卸载自动安装且不再需要的依赖包

    $ sudo apt-get autoremove
    
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    The following packages will be REMOVED:
      fontconfig-config fonts-dejavu-core libfontconfig1 libgd3 libjbig0 libjpeg-turbo8 libjpeg8 libtiff5 libvpx3 libxpm4
      libxslt1.1 nginx-common nginx-core
    0 upgraded, 0 newly installed, 13 to remove and 205 not upgraded.
    1 not fully installed or removed.
    After this operation, 9,745 kB disk space will be freed.
    Do you want to continue? [Y/n] y
    (Reading database ... 66383 files and directories currently installed.)
    Removing nginx-core (1.10.3-0ubuntu0.16.04.2) ...
    Removing libgd3:amd64 (2.1.1-4ubuntu0.16.04.8) ...
    Removing libfontconfig1:amd64 (2.11.94-0ubuntu1.1) ...
    Removing fontconfig-config (2.11.94-0ubuntu1.1) ...
    Removing fonts-dejavu-core (2.35-1) ...
    Removing libtiff5:amd64 (4.0.6-1ubuntu0.2) ...
    Removing libjbig0:amd64 (2.1-3.1) ...
    Removing libjpeg8:amd64 (8c-2ubuntu8) ...
    Removing libjpeg-turbo8:amd64 (1.4.2-0ubuntu3) ...
    Removing libvpx3:amd64 (1.5.0-2ubuntu1) ...
    Removing libxpm4:amd64 (1:3.5.11-1ubuntu0.16.04.1) ...
    Removing libxslt1.1:amd64 (1.1.28-2.1ubuntu0.1) ...
    Removing nginx-common (1.10.3-0ubuntu0.16.04.2) ...
    Processing triggers for libc-bin (2.23-0ubuntu9) ...
    Processing triggers for man-db (2.7.5-1) ...
    

    筛选已安装软件包中与nginx有关的

    $ dpkg --get-selections | grep nginx
    
    nginx-common                                    deinstall
    

    卸载nginx-common不保留配置文件

    $ sudo apt-get --purge remove nginx-common
    
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    The following packages will be REMOVED:
      nginx-common*
    0 upgraded, 0 newly installed, 1 to remove and 205 not upgraded.
    After this operation, 0 B of additional disk space will be used.
    Do you want to continue? [Y/n] y
    (Reading database ... 66243 files and directories currently installed.)
    Removing nginx-common (1.10.3-0ubuntu0.16.04.2) ...
    Purging configuration files for nginx-common (1.10.3-0ubuntu0.16.04.2) ...
    dpkg: warning: while removing nginx-common, directory '/var/www/html' not empty so not removed
    

    重新安装nginx

    $ sudo apt-get install nginx
    ...
    

    查看版本号,执行nginx配置文件语法检测

    $ nginx -v
    nginx version: nginx/1.10.3 (Ubuntu)
    
    $ sudo nginx -t
    nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
    nginx: configuration file /etc/nginx/nginx.conf test is successful
    

    虽然nginx已经重装好了,但是一路下来还有几个困惑:

    1. apt-get autoremove到底是按什么规则卸载软件?
    2. 为什么nginx-common没有在一开始的时候卸载?

    1. apt-get autoremove到底是按什么规则卸载软件?

    apt-get autoremove:删除,自动安装的,且不再需要的
    (不被其他软件当作依赖的)软件包

    举个栗子: 通过apt-get方式安装nginx时,会通过引导自动安装所需的依赖包(nginx-core),而当我们卸载nginx后,
    那些自动安装的依赖包就成为不再需要的软件包(nginx-core),通过apt-get autoremove会自动清理它们

    既然会自动删除不再需要的软件包,那么为什么nginx-common没被删除?

    2. 为什么nginx-common没有在apt-get autoremove的时候卸载?

    不知道细心的童鞋发现没,我们在卸载nginx的时候,
    手动删除了nginx的配置文件夹(sudo rm -rf /etc/nginx)。
    那这些配置文件夹和nginx-common软件包有什么关系呢?

    通过查找ubuntu packages,找到了Ubuntu16.0.4下nginx-common软件包的文件清单

    按照清单上的目录手动排查,发现本机上除了手动删除的/etc/nginx目录不存在,文件清单内的其他文件都没有被删除,
    猜测可能是nginx-common软件包完整性被破坏,导致autoremove的时候没有被删除,当然这只我的猜测。

    问题回答后续补充:

    整理完全卸载nginx命令时,发现执行如下命令,ngnix的配置文件并没有被删除

    $ sudo apt-get remove --purge nginx
    

    查阅ubuntu packages发现,nginx依赖nginx-core,nginx-core依赖nginx-common,且其中nginx的配置文件属于nginx-common软件包配置文件的一部分。

    执行如下命令进一步验证

    # 卸载nginx-common ,nginx配置文件不会被删除
    $ sudo apt-get remove nginx-common
    ...
    # 卸载nginx-common,nginx配置文件已经被删除(包括但不限于)
    $ sudo apt-get remove --purge nginx-common
    $ find /etc/nginx/
    find: ‘/etc/nginx/’: No such file or directory
    
    推翻之前的猜测:

    apt-get autoremove执行时,nginx-common软件包已经被选择用于卸载( deinstall ),但是实际还没有卸载。

    $ dpkg --get-selections| grep nginx
    nginx-common                                    deinstall
    

    了解更多关于deinstall,点击这里,如果有知道为什么的同学请不吝赐教。


    命令汇总

    # 完全卸载nginx
    $ sudo apt-get remove --purge nginx
    $ sudo apt-get autoremove --purge
    
    # 更新nginx,保留配置文件
    # 亲测nginx.conf不会被删除和覆盖,但保险起见还是建议先备份
    $ sudo apt-get remove nginx
    $ sudo apt-get autoremove
    $ sudo apt update
    $ sudo apt-get install nginx
    
    # 安装软件包
    # sudo apt-get install 软件包名称`
    # eg: 
    $ sudo apt-get install nginx
    
    # 卸载软件包
    # sudo apt-get remove 软件包名称
    # eg: 
    $ sudo apt-get remove nginx
    
    # 卸载软件包且不保留配置文件
    # sudo apt-get remove --purge 软件包名称
    # eg:
    $ sudo apt-get remove --purge nginx
    
    # 卸载自动安装的软件包且不保留配置文件
    # sudo apt-get autoremove --purge
    
    # 列出本地软件包列表
    # dpkg --get-selections [| grep 筛选关键字]
    # eg:(列出本地所有软件包)
    $ dpkg --get-selections
    # eg:(列出本地与ngnix有关的软件包)
    $ dpkg --get-selections | grep nginx
    
    # 查看进程信息
    # ps -ef [| grep 筛选关键字]
    # eg:(列出所有进程信息)
    $ ps -ef
    # eg:(列出与nginx有关的进程信息)
    $ ps -ef | grep nginx
    
    # 查看端口占用信息
    $ sudo netstat -nlp
    
    

    参考链接汇总

    Package nginx-core not configured yet.Sub-process :/user/bin/dpkg returned an error code(1)

    nginx fail to install on Ubuntu 15.10 server

    Ubuntu 14.04上卸载nginx之后重新安装没有重新生成配置文件的解决方法

    在 xenial 发行版中 all 硬件架构下的 nginx-common 软件包文件清单

    What is difference between the options “autoclean”, “autoremove” and “clean”?

    dpkg --get-selections shows packages marked “deinstall”

    相关文章

      网友评论

          本文标题:重装nginx时遇到的问题

          本文链接:https://www.haomeiwen.com/subject/adpfzqtx.html