iOS常见加密算法总结

作者: 学生陈希 | 来源:发表于2018-08-17 11:38 被阅读1次

    原文地址

    1. 安全散列算法

    Secure Hash Algorithm,常见的算法包括了 MD5SHA1HMAC 等。

    将任意长度的二进制值映射为较短的固定长度的二进制值,这个短的二进制值称为哈希值,这个算法具有不可逆、碰撞低等特性。同时该类算法可以用作数字签名,用来证实某个信息确实是由某个人发出的,同时可以保证信息没有被修改。

    实际上,简单来说,这种算法有两个特性:

    A) 不同的输入一定得出不同的 hash 值;

    B) 无法从 hash 值倒推出原来的输入。

    2. 对称加密

    symmetric-key encryption,其中常见的算法包括了 AESDES3DESRC4等。

    对称加密指的是可以使用同一个密钥对内容进行加密和解密,相比非对称加密,它的特点是加/解密速度快,并且加密的内容长度几乎没有限制。

    3. 非对称加密

    asymmetric/public-key encryption,常见的加密算法有 RSADSAECC 等。

    非对称加密有两个密钥,分别为公钥和私钥,其中公钥公开给所有人,私钥永远只能自己知道。

    使用公钥加密的信息只能使用私钥解密,使用私钥加密只能使用公钥解密。前者用来传输需要保密的信息,因为全世界只有知道对应私钥的人才可以解密;后者用来作数字签名,因为公钥对所有人公开的,可以用来确认这个信息是否是从私钥的拥有者发出的。

    <a name="Secure-Hash-Algorithm"></a>安全散列算法

    <a name="md5"></a>MD5信息摘要

    MD5 Message-Digest Algorithm,一种被广泛使用的密码散列函数,可以产生出一个128位(16字节)的散列值(hash value),用于确保信息传输完整一致。

    MD5由美国密码学家罗纳德·李维斯特(Ronald Linn Rivest)设计,于1992年公开,用以取代MD4算法。

    将数据(如一段文字)运算变为另一固定长度值,是散列算法的基础原理。

    1996年后被证实存在弱点,可以被加以破解,对于需要高度安全性的数据,专家一般建议改用其他算法,如SHA-2。2004年,证实MD5算法无法防止碰撞(collision),因此不适用于安全性认证,如SSL公开密钥认证或是数字签名等用途。

    #include <CommonCrypto/CommonCrypto.h>
    
    @implementation NSData (Add)
    
    - (NSString *)md5String {
        unsigned char result[CC_MD5_DIGEST_LENGTH];
        CC_MD5(self.bytes, (CC_LONG)self.length, result);
        NSMutableString *hash = [NSMutableString string];
        for (int i = 0; i < CC_MD5_DIGEST_LENGTH; i++) {
            [hash appendFormat:@"%02x", result[i]];
        }
        return hash;
    }
    @end
    

    <a name="SHA"></a>SHA家族

    安全散列算法(英语:Secure Hash Algorithm,缩写为SHA)是一个密码散列函数家族,是FIPS所认证的安全散列算法。
    能计算出一个数字消息所对应到的,长度固定的字符串(又称消息摘要)的算法。且若输入的消息不同,它们对应到不同字符串的机率很高。
    SHA家族的算法,由美国国家安全局(NSA)所设计,并由美国国家标准与技术研究院(NIST)发布,是美国的政府标准,其分别是:

    SHA-0:1993年发布,当时称做安全散列标准(Secure Hash Standard),发布之后很快就被NSA撤回,是SHA-1的前身。

    SHA-1:1995年发布,SHA-1在许多安全协议中广为使用,包括TLS和SSL、PGP、SSH、S/MIME和IPsec,曾被视为是MD5(更早之前被广为使用的散列函数)的后继者。但SHA-1的安全性在2000年以后已经不被大多数的加密场景所接受。
    2017年荷兰密码学研究小组CWI和Google正式宣布攻破了SHA-1。

    SHA-2:2001年发布,包括SHA-224、SHA-256、SHA-384、SHA-512、SHA-512/224、SHA-512/256。
    虽然至今尚未出现对SHA-2有效的攻击,它的算法跟SHA-1基本上仍然相似;因此有些人开始发展其他替代的散列算法。

    SHA-3:2015年正式发布,SHA-3并不是要取代SHA-2,因为SHA-2目前并没有出现明显的弱点。
    由于对MD5出现成功的破解,以及对SHA-0和SHA-1出现理论上破解的方法,NIST感觉需要一个与之前算法不同的,可替换的加密散列算法,也就是现在的SHA-3。

    #include <CommonCrypto/CommonCrypto.h>
    
    @implementation NSData (Add)
    
    - (NSString *)sha1String {
        unsigned char result[CC_SHA1_DIGEST_LENGTH];
        CC_SHA1(self.bytes, (CC_LONG)self.length, result);
        NSMutableString *hash = [NSMutableString stringWithCapacity:CC_SHA1_DIGEST_LENGTH * 2];
        for (int i = 0; i < CC_SHA1_DIGEST_LENGTH; i++) {
            [hash appendFormat:@"%02x", result[i]];
        }
        return hash;
    }
    
    - (NSString *)sha224String {
        unsigned char result[CC_SHA224_DIGEST_LENGTH];
        CC_SHA224(self.bytes, (CC_LONG)self.length, result);
        NSMutableString *hash = [NSMutableString
                                 stringWithCapacity:CC_SHA224_DIGEST_LENGTH * 2];
        for (int i = 0; i < CC_SHA224_DIGEST_LENGTH; i++) {
            [hash appendFormat:@"%02x", result[i]];
        }
        return hash;
    }
    
    - (NSString *)sha256String {
        unsigned char result[CC_SHA256_DIGEST_LENGTH];
        CC_SHA256(self.bytes, (CC_LONG)self.length, result);
        NSMutableString *hash = [NSMutableString
                                 stringWithCapacity:CC_SHA256_DIGEST_LENGTH * 2];
        for (int i = 0; i < CC_SHA256_DIGEST_LENGTH; i++) {
            [hash appendFormat:@"%02x", result[i]];
        }
        return hash;
    }
    
    - (NSString *)sha384String {
        unsigned char result[CC_SHA384_DIGEST_LENGTH];
        CC_SHA384(self.bytes, (CC_LONG)self.length, result);
        NSMutableString *hash = [NSMutableString
                                 stringWithCapacity:CC_SHA384_DIGEST_LENGTH * 2];
        for (int i = 0; i < CC_SHA384_DIGEST_LENGTH; i++) {
            [hash appendFormat:@"%02x", result[i]];
        }
        return hash;
    }
    
    - (NSString *)sha512String {
        unsigned char result[CC_SHA512_DIGEST_LENGTH];
        CC_SHA512(self.bytes, (CC_LONG)self.length, result);
        NSMutableString *hash = [NSMutableString
                                 stringWithCapacity:CC_SHA512_DIGEST_LENGTH * 2];
        for (int i = 0; i < CC_SHA512_DIGEST_LENGTH; i++) {
            [hash appendFormat:@"%02x", result[i]];
        }
        return hash;
    }
    
    @end
    

    <a name="HMAC"></a>HMAC

    HMAC加密算法是一种安全的基于加密hash函数和共享密钥的消息认证协议. 它可以有效地防止数据在传输过程中被截获和篡改,维护了数据的完整性、可靠性和安全性. HMAC加密算法是一种基于密钥的报文完整性的验证方法,其安全性是建立在Hash加密算法基础上的

    HMAC 维基百科

    #include <CommonCrypto/CommonCrypto.h>
    
    @implementation NSData (Add)
    
    
    - (NSString *)hmacStringUsingAlg:(CCHmacAlgorithm)alg withKey:(NSString *)key {
        size_t size;
        switch (alg) {
            case kCCHmacAlgMD5: size = CC_MD5_DIGEST_LENGTH; break;
            case kCCHmacAlgSHA1: size = CC_SHA1_DIGEST_LENGTH; break;
            case kCCHmacAlgSHA224: size = CC_SHA224_DIGEST_LENGTH; break;
            case kCCHmacAlgSHA256: size = CC_SHA256_DIGEST_LENGTH; break;
            case kCCHmacAlgSHA384: size = CC_SHA384_DIGEST_LENGTH; break;
            case kCCHmacAlgSHA512: size = CC_SHA512_DIGEST_LENGTH; break;
            default: return nil;
        }
        unsigned char result[size];
        const char *cKey = [key cStringUsingEncoding:NSUTF8StringEncoding];
        CCHmac(alg, cKey, strlen(cKey), self.bytes, self.length, result);
        NSMutableString *hash = [NSMutableString stringWithCapacity:size * 2];
        for (int i = 0; i < size; i++) {
            [hash appendFormat:@"%02x", result[i]];
        }
        return hash;
    }
    
    - (NSString *)hmacMD5StringWithKey:(NSString *)key {
        return [self hmacStringUsingAlg:kCCHmacAlgMD5 withKey:key];
    }
    
    
    - (NSString *)hmacSHA1StringWithKey:(NSString *)key {
        return [self hmacStringUsingAlg:kCCHmacAlgSHA1 withKey:key];
    }
    
    
    - (NSString *)hmacSHA224StringWithKey:(NSString *)key {
        return [self hmacStringUsingAlg:kCCHmacAlgSHA224 withKey:key];
    }
    
    
    - (NSString *)hmacSHA256StringWithKey:(NSString *)key {
        return [self hmacStringUsingAlg:kCCHmacAlgSHA256 withKey:key];
    }
    
    
    - (NSString *)hmacSHA384StringWithKey:(NSString *)key {
        return [self hmacStringUsingAlg:kCCHmacAlgSHA384 withKey:key];
    }
    
    
    - (NSString *)hmacSHA512StringWithKey:(NSString *)key {
        return [self hmacStringUsingAlg:kCCHmacAlgSHA512 withKey:key];
    }
    
    @end
    

    <a name="symmetric-key-encryption"></a>对称加密

    <a name="AES"></a>AES

    AES256是美国NIST在几种加密算法竞赛中选出来的对称加密算法,是用于取代DES的,原名为Rijndael加密法,破解的报道相对少些。

    如果单纯从密码学上讲,要实现与AES256相当的加密强度,RSA加密算法长度要达到16384位,另外RSA1024目前已经不被认为是安全的加密算法了。

    #include <CommonCrypto/CommonCrypto.h>
    
    @implementation NSData (Add)
    
    - (NSData *)AES256EncryptWithKey:(NSData *)key iv:(NSData *)iv {
        if (key.length != 16 && key.length != 24 && key.length != 32) return nil;
        if (iv.length != 16 && iv.length != 0) return nil;
        
        NSData *result = nil;
        size_t bufferSize = self.length + kCCBlockSizeAES128;
        void *buffer = malloc(bufferSize);
        if (!buffer) return nil;
        
        size_t encryptedSize = 0;
        CCCryptorStatus cryptStatus = CCCrypt(kCCEncrypt,
                                              kCCAlgorithmAES,
                                              kCCOptionPKCS7Padding,
                                              key.bytes,
                                              key.length,
                                              iv.bytes,
                                              self.bytes,
                                              self.length,
                                              buffer,
                                              bufferSize,
                                              &encryptedSize);
        if (cryptStatus == kCCSuccess) {
            result = [[NSData alloc] initWithBytes:buffer length:(NSUInteger)encryptedSize];
            free(buffer);
            return result;
        } else {
            free(buffer);
            return nil;
        }
    }
    
    - (NSData *)AES256DecryptWithKey:(NSData *)key iv:(NSData *)iv {
        if (key.length != 16 && key.length != 24 && key.length != 32) return nil;
        if (iv.length != 16 && iv.length != 0) return nil;
        
        NSData *result = nil;
        size_t bufferSize = self.length + kCCBlockSizeAES128;
        void *buffer = malloc(bufferSize);
        if (!buffer) return nil;
        
        size_t encryptedSize = 0;
        CCCryptorStatus cryptStatus = CCCrypt(kCCDecrypt,
                                              kCCAlgorithmAES,
                                              kCCOptionPKCS7Padding,
                                              key.bytes,
                                              key.length,
                                              iv.bytes,
                                              self.bytes,
                                              self.length,
                                              buffer,
                                              bufferSize,
                                              &encryptedSize);
        if (cryptStatus == kCCSuccess) {
            result = [[NSData alloc] initWithBytes:buffer length:(NSUInteger)encryptedSize];
            free(buffer);
            return result;
        } else {
            free(buffer);
            return nil;
        }
    }
    @end
    

    参考:

    RSA 1024和AES 256,这两种加密算法理论上哪种更安全?

    密码算法详解——AES

    <a name="RC4"></a>RC4

    Rivest Cipher 4是一种流加密算法,密钥长度可变。它加解密使用相同的密钥,因此也属于对称加密算法。

    #ifndef CX_SWAP // swap two value
    #define CX_SWAP(_a_, _b_) do {__typeof__(_a_) _tmp_ = (_a_); (_a_) = (_b_); (_b_) = (_tmp_); } while(0)
    #endif
    
    @implementation NSString (CX)
    - (NSString *)rc4WithKey:(NSString *)key {
        int j = 0;
        unichar res[self.length];
        const unichar *buffer = res;
        unsigned char s[256];
        for (int i = 0; i < 256; i++) {
            s[i] = i;
        }
        for (int i = 0; i < 256; i++) {
            j = (j + s[i] + [key characterAtIndex:(i%key.length)])%256;
            CX_SWAP(s[i], s[j]);
        }
        int i = j = 0;
        for (int y = 0; y < self.length; y++) {
            i = (i + 1) % 256;
            j = (j + 1) % 256;
            CX_SWAP(s[i], s[j]);
            
            unsigned char f = [self characterAtIndex:y] ^ s[ (s[i] + s[j]) % 256 ];
            res[y] = f;
        }
        return [NSString stringWithCharacters:buffer length:self.length];
    }
    @end
    

    <a name="asymmetric-public-key-encryption"></a>非对称加密

    <a name="RSA"></a>RSA

    以下代码参考自 Objective-C-RSA

    @interface RSA : NSObject
    
    // return base64 encoded string
    + (NSString *)encryptString:(NSString *)str publicKey:(NSString *)pubKey;
    // return raw data
    + (NSData *)encryptData:(NSData *)data publicKey:(NSString *)pubKey;
    // return base64 encoded string
    + (NSString *)encryptString:(NSString *)str privateKey:(NSString *)privKey;
    // return raw data
    + (NSData *)encryptData:(NSData *)data privateKey:(NSString *)privKey;
    
    // decrypt base64 encoded string, convert result to string(not base64 encoded)
    + (NSString *)decryptString:(NSString *)str publicKey:(NSString *)pubKey;
    + (NSData *)decryptData:(NSData *)data publicKey:(NSString *)pubKey;
    + (NSString *)decryptString:(NSString *)str privateKey:(NSString *)privKey;
    + (NSData *)decryptData:(NSData *)data privateKey:(NSString *)privKey;
    
    @end
    
    #import "RSA.h"
    #import <Security/Security.h>
    
    @implementation RSA
    
    static NSString *base64_encode_data(NSData *data){
        data = [data base64EncodedDataWithOptions:0];
        NSString *ret = [[NSString alloc] initWithData:data encoding:NSUTF8StringEncoding];
        return ret;
    }
    
    static NSData *base64_decode(NSString *str){
        NSData *data = [[NSData alloc] initWithBase64EncodedString:str options:NSDataBase64DecodingIgnoreUnknownCharacters];
        return data;
    }
    
    + (NSData *)stripPublicKeyHeader:(NSData *)d_key{
        // Skip ASN.1 public key header
        if (d_key == nil) return(nil);
        
        unsigned long len = [d_key length];
        if (!len) return(nil);
        
        unsigned char *c_key = (unsigned char *)[d_key bytes];
        unsigned int  idx    = 0;
        
        if (c_key[idx++] != 0x30) return(nil);
        
        if (c_key[idx] > 0x80) idx += c_key[idx] - 0x80 + 1;
        else idx++;
        
        // PKCS #1 rsaEncryption szOID_RSA_RSA
        static unsigned char seqiod[] =
        { 0x30,   0x0d, 0x06, 0x09, 0x2a, 0x86, 0x48, 0x86, 0xf7, 0x0d, 0x01, 0x01,
            0x01, 0x05, 0x00 };
        if (memcmp(&c_key[idx], seqiod, 15)) return(nil);
        
        idx += 15;
        
        if (c_key[idx++] != 0x03) return(nil);
        
        if (c_key[idx] > 0x80) idx += c_key[idx] - 0x80 + 1;
        else idx++;
        
        if (c_key[idx++] != '\0') return(nil);
        
        // Now make a new NSData from this buffer
        return([NSData dataWithBytes:&c_key[idx] length:len - idx]);
    }
    
    //credit: http://hg.mozilla.org/services/fx-home/file/tip/Sources/NetworkAndStorage/CryptoUtils.m#l1036
    + (NSData *)stripPrivateKeyHeader:(NSData *)d_key{
        // Skip ASN.1 private key header
        if (d_key == nil) return(nil);
    
        unsigned long len = [d_key length];
        if (!len) return(nil);
    
        unsigned char *c_key = (unsigned char *)[d_key bytes];
        unsigned int  idx    = 22; //magic byte at offset 22
    
        if (0x04 != c_key[idx++]) return nil;
    
        //calculate length of the key
        unsigned int c_len = c_key[idx++];
        int det = c_len & 0x80;
        if (!det) {
            c_len = c_len & 0x7f;
        } else {
            int byteCount = c_len & 0x7f;
            if (byteCount + idx > len) {
                //rsa length field longer than buffer
                return nil;
            }
            unsigned int accum = 0;
            unsigned char *ptr = &c_key[idx];
            idx += byteCount;
            while (byteCount) {
                accum = (accum << 8) + *ptr;
                ptr++;
                byteCount--;
            }
            c_len = accum;
        }
    
        // Now make a new NSData from this buffer
        return [d_key subdataWithRange:NSMakeRange(idx, c_len)];
    }
    
    + (SecKeyRef)addPublicKey:(NSString *)key{
        NSRange spos = [key rangeOfString:@"-----BEGIN PUBLIC KEY-----"];
        NSRange epos = [key rangeOfString:@"-----END PUBLIC KEY-----"];
        if(spos.location != NSNotFound && epos.location != NSNotFound){
            NSUInteger s = spos.location + spos.length;
            NSUInteger e = epos.location;
            NSRange range = NSMakeRange(s, e-s);
            key = [key substringWithRange:range];
        }
        key = [key stringByReplacingOccurrencesOfString:@"\r" withString:@""];
        key = [key stringByReplacingOccurrencesOfString:@"\n" withString:@""];
        key = [key stringByReplacingOccurrencesOfString:@"\t" withString:@""];
        key = [key stringByReplacingOccurrencesOfString:@" "  withString:@""];
        
        // This will be base64 encoded, decode it.
        NSData *data = base64_decode(key);
        data = [RSA stripPublicKeyHeader:data];
        if(!data){
            return nil;
        }
    
        //a tag to read/write keychain storage
        NSString *tag = @"RSAUtil_PubKey";
        NSData *d_tag = [NSData dataWithBytes:[tag UTF8String] length:[tag length]];
        
        // Delete any old lingering key with the same tag
        NSMutableDictionary *publicKey = [[NSMutableDictionary alloc] init];
        [publicKey setObject:(__bridge id) kSecClassKey forKey:(__bridge id)kSecClass];
        [publicKey setObject:(__bridge id) kSecAttrKeyTypeRSA forKey:(__bridge id)kSecAttrKeyType];
        [publicKey setObject:d_tag forKey:(__bridge id)kSecAttrApplicationTag];
        SecItemDelete((__bridge CFDictionaryRef)publicKey);
        
        // Add persistent version of the key to system keychain
        [publicKey setObject:data forKey:(__bridge id)kSecValueData];
        [publicKey setObject:(__bridge id) kSecAttrKeyClassPublic forKey:(__bridge id)
         kSecAttrKeyClass];
        [publicKey setObject:[NSNumber numberWithBool:YES] forKey:(__bridge id)
         kSecReturnPersistentRef];
        
        CFTypeRef persistKey = nil;
        OSStatus status = SecItemAdd((__bridge CFDictionaryRef)publicKey, &persistKey);
        if (persistKey != nil){
            CFRelease(persistKey);
        }
        if ((status != noErr) && (status != errSecDuplicateItem)) {
            return nil;
        }
    
        [publicKey removeObjectForKey:(__bridge id)kSecValueData];
        [publicKey removeObjectForKey:(__bridge id)kSecReturnPersistentRef];
        [publicKey setObject:[NSNumber numberWithBool:YES] forKey:(__bridge id)kSecReturnRef];
        [publicKey setObject:(__bridge id) kSecAttrKeyTypeRSA forKey:(__bridge id)kSecAttrKeyType];
        
        // Now fetch the SecKeyRef version of the key
        SecKeyRef keyRef = nil;
        status = SecItemCopyMatching((__bridge CFDictionaryRef)publicKey, (CFTypeRef *)&keyRef);
        if(status != noErr){
            return nil;
        }
        return keyRef;
    }
    
    + (SecKeyRef)addPrivateKey:(NSString *)key{
        NSRange spos;
        NSRange epos;
        spos = [key rangeOfString:@"-----BEGIN RSA PRIVATE KEY-----"];
        if(spos.length > 0){
            epos = [key rangeOfString:@"-----END RSA PRIVATE KEY-----"];
        }else{
            spos = [key rangeOfString:@"-----BEGIN PRIVATE KEY-----"];
            epos = [key rangeOfString:@"-----END PRIVATE KEY-----"];
        }
        if(spos.location != NSNotFound && epos.location != NSNotFound){
            NSUInteger s = spos.location + spos.length;
            NSUInteger e = epos.location;
            NSRange range = NSMakeRange(s, e-s);
            key = [key substringWithRange:range];
        }
        key = [key stringByReplacingOccurrencesOfString:@"\r" withString:@""];
        key = [key stringByReplacingOccurrencesOfString:@"\n" withString:@""];
        key = [key stringByReplacingOccurrencesOfString:@"\t" withString:@""];
        key = [key stringByReplacingOccurrencesOfString:@" "  withString:@""];
    
        // This will be base64 encoded, decode it.
        NSData *data = base64_decode(key);
        data = [RSA stripPrivateKeyHeader:data];
        if(!data){
            return nil;
        }
    
        //a tag to read/write keychain storage
        NSString *tag = @"RSAUtil_PrivKey";
        NSData *d_tag = [NSData dataWithBytes:[tag UTF8String] length:[tag length]];
    
        // Delete any old lingering key with the same tag
        NSMutableDictionary *privateKey = [[NSMutableDictionary alloc] init];
        [privateKey setObject:(__bridge id) kSecClassKey forKey:(__bridge id)kSecClass];
        [privateKey setObject:(__bridge id) kSecAttrKeyTypeRSA forKey:(__bridge id)kSecAttrKeyType];
        [privateKey setObject:d_tag forKey:(__bridge id)kSecAttrApplicationTag];
        SecItemDelete((__bridge CFDictionaryRef)privateKey);
    
        // Add persistent version of the key to system keychain
        [privateKey setObject:data forKey:(__bridge id)kSecValueData];
        [privateKey setObject:(__bridge id) kSecAttrKeyClassPrivate forKey:(__bridge id)
         kSecAttrKeyClass];
        [privateKey setObject:[NSNumber numberWithBool:YES] forKey:(__bridge id)
         kSecReturnPersistentRef];
    
        CFTypeRef persistKey = nil;
        OSStatus status = SecItemAdd((__bridge CFDictionaryRef)privateKey, &persistKey);
        if (persistKey != nil){
            CFRelease(persistKey);
        }
        if ((status != noErr) && (status != errSecDuplicateItem)) {
            return nil;
        }
    
        [privateKey removeObjectForKey:(__bridge id)kSecValueData];
        [privateKey removeObjectForKey:(__bridge id)kSecReturnPersistentRef];
        [privateKey setObject:[NSNumber numberWithBool:YES] forKey:(__bridge id)kSecReturnRef];
        [privateKey setObject:(__bridge id) kSecAttrKeyTypeRSA forKey:(__bridge id)kSecAttrKeyType];
    
        // Now fetch the SecKeyRef version of the key
        SecKeyRef keyRef = nil;
        status = SecItemCopyMatching((__bridge CFDictionaryRef)privateKey, (CFTypeRef *)&keyRef);
        if(status != noErr){
            return nil;
        }
        return keyRef;
    }
    
    /* START: Encryption & Decryption with RSA private key */
    
    + (NSData *)encryptData:(NSData *)data withKeyRef:(SecKeyRef) keyRef isSign:(BOOL)isSign {
        const uint8_t *srcbuf = (const uint8_t *)[data bytes];
        size_t srclen = (size_t)data.length;
        
        size_t block_size = SecKeyGetBlockSize(keyRef) * sizeof(uint8_t);
        void *outbuf = malloc(block_size);
        size_t src_block_size = block_size - 11;
        
        NSMutableData *ret = [[NSMutableData alloc] init];
        for(int idx=0; idx<srclen; idx+=src_block_size){
            //NSLog(@"%d/%d block_size: %d", idx, (int)srclen, (int)block_size);
            size_t data_len = srclen - idx;
            if(data_len > src_block_size){
                data_len = src_block_size;
            }
            
            size_t outlen = block_size;
            OSStatus status = noErr;
            
            if (isSign) {
                status = SecKeyRawSign(keyRef,
                                       kSecPaddingPKCS1,
                                       srcbuf + idx,
                                       data_len,
                                       outbuf,
                                       &outlen
                                       );
            } else {
                status = SecKeyEncrypt(keyRef,
                                       kSecPaddingPKCS1,
                                       srcbuf + idx,
                                       data_len,
                                       outbuf,
                                       &outlen
                                       );
            }
            if (status != 0) {
                NSLog(@"SecKeyEncrypt fail. Error Code: %d", status);
                ret = nil;
                break;
            }else{
                [ret appendBytes:outbuf length:outlen];
            }
        }
        
        free(outbuf);
        CFRelease(keyRef);
        return ret;
    }
    
    + (NSString *)encryptString:(NSString *)str privateKey:(NSString *)privKey{
        NSData *data = [RSA encryptData:[str dataUsingEncoding:NSUTF8StringEncoding] privateKey:privKey];
        NSString *ret = base64_encode_data(data);
        return ret;
    }
    
    + (NSData *)encryptData:(NSData *)data privateKey:(NSString *)privKey{
        if(!data || !privKey){
            return nil;
        }
        SecKeyRef keyRef = [RSA addPrivateKey:privKey];
        if(!keyRef){
            return nil;
        }
        return [RSA encryptData:data withKeyRef:keyRef isSign:YES];
    }
    
    + (NSData *)decryptData:(NSData *)data withKeyRef:(SecKeyRef) keyRef{
        const uint8_t *srcbuf = (const uint8_t *)[data bytes];
        size_t srclen = (size_t)data.length;
        
        size_t block_size = SecKeyGetBlockSize(keyRef) * sizeof(uint8_t);
        UInt8 *outbuf = malloc(block_size);
        size_t src_block_size = block_size;
        
        NSMutableData *ret = [[NSMutableData alloc] init];
        for(int idx=0; idx<srclen; idx+=src_block_size){
            //NSLog(@"%d/%d block_size: %d", idx, (int)srclen, (int)block_size);
            size_t data_len = srclen - idx;
            if(data_len > src_block_size){
                data_len = src_block_size;
            }
            
            size_t outlen = block_size;
            OSStatus status = noErr;
            status = SecKeyDecrypt(keyRef,
                                   kSecPaddingNone,
                                   srcbuf + idx,
                                   data_len,
                                   outbuf,
                                   &outlen
                                   );
            if (status != 0) {
                NSLog(@"SecKeyEncrypt fail. Error Code: %d", status);
                ret = nil;
                break;
            }else{
                //the actual decrypted data is in the middle, locate it!
                int idxFirstZero = -1;
                int idxNextZero = (int)outlen;
                for ( int i = 0; i < outlen; i++ ) {
                    if ( outbuf[i] == 0 ) {
                        if ( idxFirstZero < 0 ) {
                            idxFirstZero = i;
                        } else {
                            idxNextZero = i;
                            break;
                        }
                    }
                }
                
                [ret appendBytes:&outbuf[idxFirstZero+1] length:idxNextZero-idxFirstZero-1];
            }
        }
        
        free(outbuf);
        CFRelease(keyRef);
        return ret;
    }
    
    
    + (NSString *)decryptString:(NSString *)str privateKey:(NSString *)privKey{
        NSData *data = [[NSData alloc] initWithBase64EncodedString:str options:NSDataBase64DecodingIgnoreUnknownCharacters];
        data = [RSA decryptData:data privateKey:privKey];
        NSString *ret = [[NSString alloc] initWithData:data encoding:NSUTF8StringEncoding];
        return ret;
    }
    
    + (NSData *)decryptData:(NSData *)data privateKey:(NSString *)privKey{
        if(!data || !privKey){
            return nil;
        }
        SecKeyRef keyRef = [RSA addPrivateKey:privKey];
        if(!keyRef){
            return nil;
        }
        return [RSA decryptData:data withKeyRef:keyRef];
    }
    
    /* END: Encryption & Decryption with RSA private key */
    
    /* START: Encryption & Decryption with RSA public key */
    
    + (NSString *)encryptString:(NSString *)str publicKey:(NSString *)pubKey{
        NSData *data = [RSA encryptData:[str dataUsingEncoding:NSUTF8StringEncoding] publicKey:pubKey];
        NSString *ret = base64_encode_data(data);
        return ret;
    }
    
    + (NSData *)encryptData:(NSData *)data publicKey:(NSString *)pubKey{
        if(!data || !pubKey){
            return nil;
        }
        SecKeyRef keyRef = [RSA addPublicKey:pubKey];
        if(!keyRef){
            return nil;
        }
        return [RSA encryptData:data withKeyRef:keyRef isSign:NO];
    }
    
    + (NSString *)decryptString:(NSString *)str publicKey:(NSString *)pubKey{
        NSData *data = [[NSData alloc] initWithBase64EncodedString:str options:NSDataBase64DecodingIgnoreUnknownCharacters];
        data = [RSA decryptData:data publicKey:pubKey];
        NSString *ret = [[NSString alloc] initWithData:data encoding:NSUTF8StringEncoding];
        return ret;
    }
    
    + (NSData *)decryptData:(NSData *)data publicKey:(NSString *)pubKey{
        if(!data || !pubKey){
            return nil;
        }
        SecKeyRef keyRef = [RSA addPublicKey:pubKey];
        if(!keyRef){
            return nil;
        }
        return [RSA decryptData:data withKeyRef:keyRef];
    }
    
    /* END: Encryption & Decryption with RSA public key */
    

    参考:

    RSA算法原理


    其他

    CRC

    CRC即循环冗余校验码(Cyclic Redundancy Check [1] ):是数据通信领域中最常用的一种查错校验码,其特征是信息字段和校验字段的长度可以任意选定。

    循环冗余检查(CRC)是一种数据传输检错功能,对数据进行多项式计算,并将得到的结果附在帧的后面,接收设备也执行类似的算法,以保证数据传输的正确性和完整性。

    
    #import <zlib.h>
    
    ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
    /*
         Update a running CRC-32 with the bytes buf[0..len-1] and return the
       updated CRC-32.  If buf is Z_NULL, this function returns the required
       initial value for the crc.  Pre- and post-conditioning (one's complement) is
       performed within this function so it shouldn't be done by the application.
    
       Usage example:
    
         uLong crc = crc32(0L, Z_NULL, 0);
    
         while (read_buffer(buffer, length) != EOF) {
           crc = crc32(crc, buffer, length);
         }
         if (crc != original_crc) error();
    */
    
    

    参考

    CRC的校验原理

    算法原理

    加密算法简介

    相关文章

      网友评论

        本文标题:iOS常见加密算法总结

        本文链接:https://www.haomeiwen.com/subject/cbuzbftx.html