美文网首页wifidog
wifidog源码分析 - 客户端检测线程

wifidog源码分析 - 客户端检测线程

作者: 3c937c88e6c0 | 来源:发表于2015-02-03 16:33 被阅读179次

    引言

    当wifidog启动时,会启动一个线程(thread_client_timeout_check)维护客户端列表,具体就是wifidog必须定时检测客户端列表中的每个客户端是否在线,而wifidog是通过两种方式进行检测客户端在线情况,一种是定时通过iptables获取客户端出入总流量更新客户端时间,通过最近更新时间进行判断(有新的出入流量则更新客户端时间,之后使用最新客户端时间与当前时间判断),一种是查询认证服务器,通过认证服务器的返回信息进行判断(将客户端IP和状态请求发送给认证服务器,认证服务器会返回客户端是否在线,这种情况是用于客户端是在认证服务器上正常登出)。

    thread_client_timeout_check

    此线程执行函数用于维护客户端列表,此线程是一个while (1)循环,每隔一个配置文件中的checkinterval时间间隔执行一次fw_sync_with_authserver函数,核心代码处于fw_sync_with_authserver函数中,我们先具体代码,

    void

    thread_client_timeout_check(const void *arg)

    {

    pthread_cond_t        cond = PTHREAD_COND_INITIALIZER;

    pthread_mutex_t        cond_mutex = PTHREAD_MUTEX_INITIALIZER;

    struct    timespec    timeout;

    while (1) {

    /* 设置超时时间 */

    timeout.tv_sec = time(NULL) + config_get_config()->checkinterval;

    timeout.tv_nsec = 0;

    /* 使用pthread_cond_timedwait必须先上锁 */

    pthread_mutex_lock(&cond_mutex);

    /* 等待超时 */

    pthread_cond_timedwait(&cond, &cond_mutex, &timeout);

    /* 解锁 */

    pthread_mutex_unlock(&cond_mutex);

    debug(LOG_DEBUG, "Running fw_counter()");

    /* 执行核心代码 */

    fw_sync_with_authserver();

    }

    }

    fw_sync_with_authserver

    此函数是此线程的核心函数,维护客户端列表就在此中,其首先会遍历客户端列表,通过iptables获取每个客户端列表的出入流量,之后根据出口流量(入口流量不做判断,详见 代码片段1.3)更新客户端最近更新时间(last_updated),之后使用每个客户端最近更新时间与当前时间比较,如果超过超时间隔则判断为下线,而如果未超时,则还会从认证服务器中获取此客户端状态,确定其是否在线。具体流程如下

    更新客户端出入口流量,根据出口流量更新每个客户端的最近更新时间

    客户端超时则从客户端列表中移除并通过iptables禁止其访问网络,并告知认证服务器此客户端下线

    客户端未超时则从认证服务器获取此客户端信息,判断其是否通过认证服务器下线

    代码片段1.2:

    void

    fw_sync_with_authserver(void)

    {

    t_authresponse  authresponse;

    char            *token, *ip, *mac;

    t_client        *p1, *p2;

    unsigned long long        incoming, outgoing;

    s_config *config = config_get_config();

    /* 根据iptables流量更新最近更新时间,具体代码见 代码片段1.3 */

    if (-1 == iptables_fw_counters_update()) {

    debug(LOG_ERR, "Could not get counters from firewall!");

    return;

    }

    LOCK_CLIENT_LIST();

    /* 遍历客户端列表 */

    for (p1 = p2 = client_get_first_client(); NULL != p1; p1 = p2) {

    p2 = p1->next;

    ip = safe_strdup(p1->ip);

    token = safe_strdup(p1->token);

    mac = safe_strdup(p1->mac);

    outgoing = p1->counters.outgoing;

    incoming = p1->counters.incoming;

    UNLOCK_CLIENT_LIST();

    /* ping一下此客户端,不清楚作用 */

    icmp_ping(ip);

    /* 将客户端的出入流量上传至认证服务器,此时如果此客户端在认证服务器上下线会返回告知wifidog */

    if (config->auth_servers != NULL) {

    auth_server_request(&authresponse, REQUEST_TYPE_COUNTERS, ip, mac, token, incoming, outgoing);

    }

    LOCK_CLIENT_LIST();

    /* 从客户端列表获取IP,MAC对应客户端 */

    if (!(p1 = client_list_find(ip, mac))) {

    debug(LOG_ERR, "Node %s was freed while being re-validated!", ip);

    } else {

    time_t    current_time=time(NULL);

    debug(LOG_INFO, "Checking client %s for timeout:  Last updated %ld (%ld seconds ago), timeout delay %ld seconds, current time %ld, ",

    p1->ip, p1->counters.last_updated, current_time-p1->counters.last_updated, config->checkinterval * config->clienttimeout, current_time);

    /* 判断是否超时,(最近更新时间 + 超时时间 <= 当前时间) 表明以超过超时时间,下线 */

    if (p1->counters.last_updated +

    (config->checkinterval * config->clienttimeout)

    <= current_time) {

    debug(LOG_INFO, "%s - Inactive for more than %ld seconds, removing client and denying in firewall",

    p1->ip, config->checkinterval * config->clienttimeout);

    /* 修改iptables禁止此客户端访问外网 */

    fw_deny(p1->ip, p1->mac, p1->fw_connection_state);

    /* 从客户端列表中删除此客户端 */

    client_list_delete(p1);

    /* 通知认证服务器此客户端下线 */

    if (config->auth_servers != NULL) {

    UNLOCK_CLIENT_LIST();

    auth_server_request(&authresponse, REQUEST_TYPE_LOGOUT, ip, mac, token, 0, 0);

    LOCK_CLIENT_LIST();

    }

    } else {

    /* 未超时处理 */

    if (config->auth_servers != NULL) {

    /* 判断认证服务器返回信息 */

    switch (authresponse.authcode) {

    /* 认证服务器禁止其访问网络(下线或遭拒绝) */

    case AUTH_DENIED:

    debug(LOG_NOTICE, "%s - Denied. Removing client and firewall rules", p1->ip);

    fw_deny(p1->ip, p1->mac, p1->fw_connection_state);

    client_list_delete(p1);

    break;

    case AUTH_VALIDATION_FAILED:

    debug(LOG_NOTICE, "%s - Validation timeout, now denied. Removing client and firewall rules", p1->ip);

    fw_deny(p1->ip, p1->mac, p1->fw_connection_state);

    client_list_delete(p1);

    break;

    /* 认证服务器允许其访问网络(在线) */

    case AUTH_ALLOWED:

    if (p1->fw_connection_state != FW_MARK_KNOWN) {

    debug(LOG_INFO, "%s - Access has changed to allowed, refreshing firewall and clearing counters", p1->ip);

    if (p1->fw_connection_state != FW_MARK_PROBATION) {

    p1->counters.incoming = p1->counters.outgoing = 0;

    }

    else {

    debug(LOG_INFO, "%s - Skipped clearing counters after all, the user was previously in validation", p1->ip);

    }

    p1->fw_connection_state = FW_MARK_KNOWN;

    fw_allow(p1->ip, p1->mac, p1->fw_connection_state);

    }

    break;

    case AUTH_VALIDATION:

    debug(LOG_INFO, "%s - User in validation period", p1->ip);

    break;

    case AUTH_ERROR:

    debug(LOG_WARNING, "Error communicating with auth server - leaving %s as-is for now", p1->ip);

    break;

    default:

    debug(LOG_ERR, "I do not know about authentication code %d", authresponse.authcode);

    break;

    }

    }

    }

    }

    free(token);

    free(ip);

    free(mac);

    }

    UNLOCK_CLIENT_LIST();

    }

    代码片段1.3:

    int

    iptables_fw_counters_update(void)

    {

    FILE *output;

    char *script,

    ip[16],

    rc;

    unsigned long long int counter;

    t_client *p1;

    struct in_addr tempaddr;

    /* 通过iptables获取其出口流量 */

    safe_asprintf(&script, "%s %s", "iptables", "-v -n -x -t mangle -L " TABLE_WIFIDOG_OUTGOING);

    iptables_insert_gateway_id(&script);

    output = popen(script, "r");

    free(script);

    if (!output) {

    debug(LOG_ERR, "popen(): %s", strerror(errno));

    return -1;

    }

    /* iptables返回信息处理 */

    while (('\n' != fgetc(output)) && !feof(output))

    ;

    while (('\n' != fgetc(output)) && !feof(output))

    ;

    while (output && !(feof(output))) {

    rc = fscanf(output, "%*s %llu %*s %*s %*s %*s %*s %15[0-9.] %*s %*s %*s %*s %*s %*s", &counter, ip);

    //rc = fscanf(output, "%*s %llu %*s %*s %*s %*s %*s %15[0-9.] %*s %*s %*s %*s %*s 0x%*u", &counter, ip);

    if (2 == rc && EOF != rc) {

    if (!inet_aton(ip, &tempaddr)) {

    debug(LOG_WARNING, "I was supposed to read an IP address but instead got [%s] - ignoring it", ip);

    continue;

    }

    debug(LOG_DEBUG, "Read outgoing traffic for %s: Bytes=%llu", ip, counter);

    LOCK_CLIENT_LIST();

    /* 通过ip获取客户端信息结构 */

    if ((p1 = client_list_find_by_ip(ip))) {

    /* (上一次出口总流量(outgoing) + wifidog启动时的出口总流量(outgoing_history) < iptables返回的出口总流量) 表示此客户端有新的出口流量 */

    if ((p1->counters.outgoing - p1->counters.outgoing_history) < counter) {

    /* 更新上一次出口总流量(outgoing)为wifidog启动时的出口总流量(outgoing_history) + iptables返回总流量(counter) */

    p1->counters.outgoing = p1->counters.outgoing_history + counter;

    /* 更新最近更新时间为当前时间 */

    p1->counters.last_updated = time(NULL);

    debug(LOG_DEBUG, "%s - Updated counter.outgoing to %llu bytes.  Updated last_updated to %d", ip, counter, p1->counters.last_updated);

    }

    } else {

    debug(LOG_ERR, "Could not find %s in client list", ip);

    }

    UNLOCK_CLIENT_LIST();

    }

    }

    pclose(output);

    /* 通过iptables获取其入口流量,入口流量不做更新最近更新时间参考,只用于更新后上传至认证服务器,其原理同上,后面的代码不做详细分析 */

    safe_asprintf(&script, "%s %s", "iptables", "-v -n -x -t mangle -L " TABLE_WIFIDOG_INCOMING);

    iptables_insert_gateway_id(&script);

    output = popen(script, "r");

    free(script);

    if (!output) {

    debug(LOG_ERR, "popen(): %s", strerror(errno));

    return -1;

    }

    while (('\n' != fgetc(output)) && !feof(output))

    ;

    while (('\n' != fgetc(output)) && !feof(output))

    ;

    while (output && !(feof(output))) {

    rc = fscanf(output, "%*s %llu %*s %*s %*s %*s %*s %*s %15[0-9.]", &counter, ip);

    if (2 == rc && EOF != rc) {

    if (!inet_aton(ip, &tempaddr)) {

    debug(LOG_WARNING, "I was supposed to read an IP address but instead got [%s] - ignoring it", ip);

    continue;

    }

    debug(LOG_DEBUG, "Read incoming traffic for %s: Bytes=%llu", ip, counter);

    LOCK_CLIENT_LIST();

    if ((p1 = client_list_find_by_ip(ip))) {

    if ((p1->counters.incoming - p1->counters.incoming_history) < counter) {

    p1->counters.incoming = p1->counters.incoming_history + counter;

    debug(LOG_DEBUG, "%s - Updated counter.incoming to %llu bytes", ip, counter);

    }

    } else {

    debug(LOG_ERR, "Could not find %s in client list", ip);

    }

    UNLOCK_CLIENT_LIST();

    }

    }

    pclose(output);

    return 1;

    }

    本文由http://www.wifidog.pro/2015/02/02/wifidog%E5%AE%A2%E6%88%B7%E7%AB%AF%E6%A3%80%E6%B5%8B.html整理编辑,转载请注明出处

    相关文章

      网友评论

        本文标题: wifidog源码分析 - 客户端检测线程

        本文链接:https://www.haomeiwen.com/subject/dgrrxttx.html