美文网首页
iOS Clang Warning

iOS Clang Warning

作者: 喜欢就可以 | 来源:发表于2016-02-24 13:26 被阅读614次

    Which Clang Warning Is Generating This Message?

    (http://fuckingclangwarnings.com/#lex), Parser, or Semantic Warnings

    -WCFString-literal

    input conversion stopped due to an input byte that does not belong to the input codeset UTF-8

    -WNSObject-attribute

    __attribute ((NSObject)) may be put on a typedef only, attribute is ignored

    -Wabstract-vbase-init

    initializer for virtual base class %0 of abstract class %1 will never be used

    -Waddress-of-array-temporary

    pointer is initialized by a temporary array, which will be destroyed at the end of the full-expression

    -Warc-maybe-repeated-use-of-weak

    "weak %select{variable|property|implicit property|instance variable}0 %1 may be accessed multiple times in this %select{function|method|block|lambda}2 and may be unpredictably set to nil assign to a strong variable to keep the object alive

    -Warc-non-pod-memaccess

    %select{destination for|source of}0 this %1 call is a pointer to ownership-qualified type %2

    -Warc-performSelector-leaks

    performSelector may cause a leak because its selector is unknown

    -Warc-repeated-use-of-weak

    "weak %select{variable|property|implicit property|instance variable}0 %1 is accessed multiple times in this %select{function|method|block|lambda}2 but may be unpredictably set to nil assign to a strong variable to keep the object alive

    -Warc-retain-cycles

    capturing %0 strongly in this block is likely to lead to a retain cycle

    -Warc-unsafe-retained-assign

    assigning retained object to unsafe property object will be released after assignment

    -Warc-unsafe-retained-assign

    assigning %select{array literal|dictionary literal|numeric literal|boxed expression|should not happen|block literal}0 to a weak %select{property|variable}1 object will be released after assignment

    -Warc-unsafe-retained-assign

    assigning retained object to %select{weak|unsafe_unretained}0 %select{property|variable}1 object will be released after assignment

    -Warray-bounds

    array index %0 is past the end of the array (which contains %1 element%s2)

    -Warray-bounds

    array index %0 is before the beginning of the array

    -Warray-bounds

    'static' has no effect on zero-length arrays

    -Warray-bounds

    array argument is too small contains %0 elements, callee requires at least %1

    -Warray-bounds-pointer-arithmetic

    the pointer incremented by %0 refers past the end of the array (that contains %1 element%s2)

    -Warray-bounds-pointer-arithmetic

    the pointer decremented by %0 refers before the beginning of the array

    -Wassign-enum

    integer constant not in range of enumerated type %0

    -Watomic-property-with-user-defined-accessor

    writable atomic property %0 cannot pair a synthesized %select{getter|setter}1 with a user defined %select{getter|setter}2

    -Wattributes

    unknown attribute %0 ignored

    -Wauto-var-id

    'auto' deduced as 'id' in declaration of %0

    -Wavailability

    unknown platform %0 in availability macro

    -Wavailability

    overriding method %select{introduced after|deprecated before|obsoleted before}0 overridden method on %1 (%2 vs. %3)

    -Wavailability

    availability does not match previous declaration

    -Wavailability

    overriding method cannot be unavailable on %0 when its overridden method is available

    -Wavailability

    feature cannot be %select{introduced|deprecated|obsoleted}0 in %1 version %2 before it was %select{introduced|deprecated|obsoleted}3 in version %4 attribute ignored

    -Wbad-function-cast

    cast from function call of type %0 to non-matching type %1

    -Wbitfield-constant-conversion

    implicit truncation from %2 to bitfield changes value from %0 to %1

    -Wbitwise-op-parentheses

    '&' within '|'

    -Wbool-conversion

    "initialization of pointer of type %0 to null from a constant boolean " "expression

    -Wbridge-cast

    %0 cannot bridge to %1

    -Wbridge-cast

    %0 bridges to %1, not %2

    -Wbuiltin-requires-header

    declaration of built-in function '%0' requires inclusion of the header stdio.h

    -Wbuiltin-requires-header

    declaration of built-in function '%0' requires inclusion of the header setjmp.h

    -Wbuiltin-requires-header

    declaration of built-in function '%0' requires inclusion of the header ucontext.h

    -Wc++-compat

    %select{|empty }0%select{struct|union}1 has size 0 in C, %select{size 1|non-zero size}2 in C++

    -Wc++11-compat

    explicit instantiation cannot be 'inline'

    -Wc++11-compat

    explicit instantiation of %0 must occur at global scope

    -Wc++11-compat

    explicit instantiation of %0 not in a namespace enclosing %1

    -Wc++11-compat

    explicit instantiation of %q0 must occur in namespace %1

    -Wc++11-narrowing

    constant expression evaluates to %0 which cannot be narrowed to type %1 in C++11

    -Wc++11-narrowing

    type %0 cannot be narrowed to %1 in initializer list in C++11

    -Wc++11-narrowing

    non-constant-expression cannot be narrowed from type %0 to %1 in initializer list in C++11

    -Wc++98-c++11-compat

    type definition in a constexpr %select{function|constructor}0 is incompatible with C++ standards before C++1y

    -Wc++98-c++11-compat

    use of this statement in a constexpr %select{function|constructor}0 is incompatible with C++ standards before C++1y

    -Wc++98-c++11-compat

    init-captures.def warn_cxx11_compat_init_capture : Warning "initialized lambda captures are incompatible with C++ standards " "before C++1y

    -Wc++98-c++11-compat

    variable declaration in a constexpr %select{function|constructor}0 is incompatible with C++ standards before C++1y

    -Wc++98-c++11-compat

    constexpr function with no return statements is incompatible with C++ standards before C++1y

    -Wc++98-c++11-compat

    multiple return statements in constexpr function is incompatible with C++ standards before C++1y

    -Wc++98-c++11-compat

    variable templates are incompatible with C++ standards before C++1y

    -Wc++98-compat

    substitution failure due to access control is incompatible with C++98

    -Wc++98-compat

    %select{anonymous struct|union}0 member %1 with a non-trivial %select{constructor|copy constructor|move constructor|copy assignment operator|move assignment operator|destructor}2 is incompatible with C++98

    -Wc++98-compat

    enumeration type in nested name specifier is incompatible with C++98

    -Wc++98-compat

    static data member %0 in union is incompatible with C++98

    -Wc++98-compat

    default template arguments for a function template are incompatible with C++98

    -Wc++98-compat

    scalar initialized from empty initializer list is incompatible with C++98

    -Wc++98-compat

    befriending %1 without '%select{struct|interface|union|class|enum}0' keyword is incompatible with C++98

    -Wc++98-compat

    use of null pointer as non-type template argument is incompatible with C++98

    -Wc++98-compat

    friend declaration naming a member of the declaring class is incompatible with C++98

    -Wc++98-compat

    non-class friend type %0 is incompatible with C++98

    -Wc++98-compat

    befriending enumeration type %0 is incompatible with C++98

    -Wc++98-compat

    use of non-static data member %0 in an unevaluated context is incompatible with C++98

    -Wc++98-compat

    friend function %0 would be implicitly redefined in C++98

    -Wc++98-compat

    %select{class template|class template partial|variable template|variable template partial|function template|member function|static data member|member class|member enumeration}0 specialization of %1 outside namespace %2 is incompatible with C++98

    -Wc++98-compat

    reference initialized from initializer list is incompatible with C++98

    -Wc++98-compat

    redundant parentheses surrounding address non-type template argument are incompatible with C++98

    -Wc++98-compat

    initialization of initializer_list object is incompatible with C++98

    -Wc++98-compat

    use of 'template' keyword outside of a template is incompatible with C++98

    -Wc++98-compat

    non-type template argument referring to %select{function|object}0 %1 with internal linkage is incompatible with C++98

    -Wc++98-compat

    use of 'typename' outside of a template is incompatible with C++98

    -Wc++98-compat

    passing object of trivial but non-POD type %0 through variadic %select{function|block|method|constructor}1 is incompatible with C++98

    -Wc++98-compat

    goto would jump into protected scope in C++98

    -Wc++98-compat

    constructor call from initializer list is incompatible with C++98

    -Wc++98-compat

    'auto' type specifier is incompatible with C++98

    -Wc++98-compat

    delegating constructors are incompatible with C++98

    -Wc++98-compat

    'constexpr' specifier is incompatible with C++98

    -Wc++98-compat

    inheriting constructors are incompatible with C++98

    -Wc++98-compat

    explicit conversion functions are incompatible with C++98

    -Wc++98-compat

    switch case would be in a protected scope in C++98

    -Wc++98-compat

    '%0' type specifier is incompatible with C++98

    -Wc++98-compat

    indirect goto might cross protected scopes in C++98

    -Wc++98-compat-pedantic

    cast between pointer-to-function and pointer-to-object is incompatible with C++98

    -Wc++98-compat-pedantic

    implicit conversion from array size expression of type %0 to %select{integral|enumeration}1 type %2 is incompatible with C++98

    -Wcast-align

    cast from %0 to %1 increases required alignment from %2 to %3

    -Wcast-of-sel-type

    cast of type %0 to %1 is deprecated use sel_getName instead

    -Wchar-subscripts

    array subscript is of type 'char'

    -Wconditional-uninitialized

    variable %0 may be uninitialized when %select{used here|captured by block}1

    -Wconstant-logical-operand

    use of logical '%0' with constant operand

    -Wconstexpr-not-const

    'constexpr' non-static member function will not be implicitly 'const' in C++1y add 'const' to avoid a change in behavior

    -Wconsumed

    state of variable '%0' must match at the entry and exit of loop

    -Wconsumed

    parameter '%0' not in expected state when the function returns: expected '%1', observed '%2'

    -Wconsumed

    argument not in expected state expected '%0', observed '%1'

    -Wconsumed

    invalid invocation of method '%0' on a temporary object while it is in the '%1' state

    -Wconsumed

    return state set for an unconsumable type '%0'

    -Wconsumed

    consumed analysis attribute is attached to member of class '%0' which isn't marked as consumable

    -Wconsumed

    invalid invocation of method '%0' on object '%1' while it is in the '%2' state

    -Wconsumed

    return value not in expected state expected '%0', observed '%1'

    -Wconversion

    implicit conversion discards imaginary component: %0 to %1

    -Wconversion

    non-type template argument with value '%0' converted to '%1' for unsigned template parameter of type %2

    -Wconversion

    implicit conversion loses floating-point precision: %0 to %1

    -Wconversion

    implicit conversion loses integer precision: %0 to %1

    -Wconversion

    non-type template argument value '%0' truncated to '%1' for template parameter of type %2

    -Wconversion

    implicit conversion turns vector to scalar: %0 to %1

    -Wconversion

    implicit conversion turns floating-point number into integer: %0 to %1

    -Wcovered-switch-default

    default label in switch which covers all enumeration values

    -Wcustom-atomic-properties

    atomic by default property %0 has a user defined %select{getter|setter}1 (property should be marked 'atomic' if this is intended)

    -Wdangling-field

    initializing pointer member %0 with the stack address of parameter %1

    -Wdangling-field

    binding reference %select{|subobject of }1member %0 to a temporary value

    -Wdangling-field

    binding reference member %0 to stack allocated parameter %1

    -Wdangling-initializer-list

    array backing the initializer list will be destroyed at the end of %select{the full-expression|the constructor}0

    -Wdelete-incomplete

    deleting pointer to incomplete type %0 may cause undefined behavior

    -Wdelete-non-virtual-dtor

    delete called on %0 that is abstract but has non-virtual destructor

    -Wdelete-non-virtual-dtor

    delete called on %0 that has virtual functions but non-virtual destructor

    -Wdeprecated

    access declarations are deprecated use using declarations instead

    -Wdeprecated

    definition of implicit copy %select{constructor|assignment operator}1 for %0 is deprecated because it has a user-declared %select{copy %select{assignment operator|constructor}1|destructor}2

    -Wdeprecated

    dynamic exception specifications are deprecated

    -Wdeprecated-increment-bool

    incrementing expression of type bool is deprecated

    -Wdeprecated-objc-isa-usage

    assignment to Objective-C's isa is deprecated in favor of object_setClass()

    -Wdeprecated-objc-isa-usage

    direct access to Objective-C's isa is deprecated in favor of object_getClass()

    -Wdeprecated-objc-pointer-introspection

    bitmasking for introspection of Objective-C object pointers is strongly discouraged

    -Wdeprecated-objc-pointer-introspection-performSelector

    warn_objc_pointer_masking.Text

    -Wdeprecated-writable-strings

    dummy warning to enable -fconst-strings

    -Wdirect-ivar-access

    instance variable %0 is being directly accessed

    -Wdistributed-object-modifiers

    conflicting distributed object modifiers on return type in implementation of %0

    -Wdistributed-object-modifiers

    conflicting distributed object modifiers on parameter type in implementation of %0

    -Wdivision-by-zero

    division by zero is undefined

    -Wdivision-by-zero

    remainder by zero is undefined

    -Wdocumentation

    parameter '%0' not found in the function declaration

    -Wdocumentation

    not a Doxygen trailing comment

    -Wduplicate-enum

    element %0 has been implicitly assigned %1 which another element has been assigned

    -Wduplicate-method-match

    multiple declarations of method %0 found and ignored

    -Wdynamic-class-memaccess

    %select{destination for|source of|first operand of|second operand of}0 this %1 call is a pointer to dynamic class %2 vtable pointer will be %select{overwritten|copied|moved|compared}3

    -Wempty-body

    switch statement has empty body

    -Wempty-body

    for loop has empty body

    -Wempty-body

    if statement has empty body

    -Wempty-body

    range-based for loop has empty body

    -Wempty-body

    while loop has empty body

    -Wenum-compare

    comparison of two values with different enumeration types%diff{ ($ and $)|}0,1

    -Wenum-conversion

    implicit conversion from enumeration type %0 to different enumeration type %1

    -Wexit-time-destructors

    declaration requires an exit-time destructor

    -Wexplicit-ownership-type

    method parameter of type %0 with no explicit ownership

    -Wextern-c-compat

    %select{|empty }0%select{struct|union}1 has size 0 in C, %select{size 1|non-zero size}2 in C++

    -Wextern-initializer

    'extern' variable has an initializer

    -Wfloat-equal

    comparing floating point with == or != is unsafe

    -Wformat

    "data argument position '%0' exceeds the number of data arguments (%1)

    -Wformat

    position arguments in format strings start counting at 1 (not 0)

    -Wformat

    invalid position specified for %select{field width|field precision}0

    -Wformat

    cannot mix positional and non-positional arguments in format string

    -Wformat

    values of type '%0' should not be used as format arguments add an explicit cast to %1 instead

    -Wformat

    format specifies type %0 but the argument has type %1

    -Wformat

    zero field width in scanf format string is unused

    -Wformat

    no closing ']' for '%%[' in scanf format string

    -Wformat

    format string should not be a wide string

    -Wformat

    format string contains '\0' within the string body

    -Wformat

    '%select{|.}0' specified field %select{width|precision}0 is missing a matching 'int' argument

    -Wformat

    field %select{width|precision}0 should have type %1, but argument has type %2

    -Wformat

    %select{field width|precision}0 used with '%1' conversion specifier, resulting in undefined behavior

    -Wformat

    format string missing

    -Wformat

    incomplete format specifier

    -Wformat

    flag '%0' results in undefined behavior with '%1' conversion specifier

    -Wformat

    flag '%0' is ignored when flag '%1' is present

    -Wformat

    more '%%' conversions than data arguments

    -Wformat

    length modifier '%0' results in undefined behavior or no effect with '%1' conversion specifier

    -Wformat-extra-args

    data argument not used by format string

    -Wformat-invalid-specifier

    invalid conversion specifier '%0'

    -Wformat-nonliteral

    format string is not a string literal

    -Wformat-security

    format string is not a string literal (potentially insecure)

    -Wformat-zero-length

    format string is empty

    -Wgcc-compat

    GCC does not allow the 'cleanup' attribute argument to be anything other than a simple identifier

    -Wglobal-constructors

    declaration requires a global constructor

    -Wglobal-constructors

    declaration requires a global destructor

    -Wgnu-conditional-omitted-operand

    use of GNU ?: conditional expression extension, omitting middle operand

    -Wheader-hygiene

    using namespace directive in global context in header

    -Widiomatic-parentheses

    using the result of an assignment as a condition without parentheses

    -Wignored-attributes

    'malloc' attribute only applies to functions returning a pointer type

    -Wignored-attributes

    %0 attribute only applies to %select{functions|unions|variables and functions|functions and methods|parameters|functions, methods and blocks|functions, methods, and classes|functions, methods, and parameters|classes|variables|methods|variables, functions and labels|fields and global variables|structs|variables, functions and tag types|thread-local variables|variables and fields|variables, data members and tag types|types and namespaces|Objective-C interfaces}1

    -Wignored-attributes

    '%0' attribute cannot be specified on a definition

    -Wignored-attributes

    __weak attribute cannot be specified on an automatic variable when ARC is not enabled

    -Wignored-attributes

    Objective-C GC does not allow weak variables on the stack

    -Wignored-attributes

    __weak attribute cannot be specified on a field declaration

    -Wignored-attributes

    attribute %0 cannot be applied to %select{functions|Objective-C method}1 without return value

    -Wignored-attributes

    attribute declaration must precede definition

    -Wignored-attributes

    attribute %0 is ignored, place it after "%select{class|struct|union|interface|enum}1" to apply attribute to type declaration

    -Wignored-attributes

    __declspec attribute %0 is not supported

    -Wignored-attributes

    attribute %0 ignored, because it cannot be applied to a type

    -Wignored-attributes

    attribute %0 after definition is ignored

    -Wignored-attributes

    %0 attribute ignored

    -Wignored-attributes

    'sentinel' attribute only supported for variadic %select{functions|blocks}0

    -Wignored-attributes

    'sentinel' attribute requires named arguments

    -Wignored-attributes

    '%0' only applies to %select{function|pointer|Objective-C object or block pointer}1 types type here is %2

    -Wignored-attributes

    'nonnull' attribute applied to function with no pointer arguments

    -Wignored-attributes

    %0 attribute can only be applied to instance variables or properties

    -Wignored-attributes

    ibaction attribute can only be applied to Objective-C instance methods

    -Wignored-attributes

    %0 calling convention ignored on variadic function

    -Wignored-attributes

    %0 only applies to variables with static storage duration and functions

    -Wignored-attributes

    %0 attribute argument not supported: %1

    -Wignored-attributes

    pramga ms_struct can not be used with dynamic classes or structures

    -Wignored-attributes

    transparent union definition must contain at least one field transparent_union attribute ignored

    -Wignored-attributes

    first field of a transparent union cannot have %select{floating point|vector}0 type %1 transparent_union attribute ignored

    -Wignored-attributes

    'gnu_inline' attribute requires function to be marked 'inline', attribute ignored

    -Wignored-attributes

    calling convention %0 ignored for this target

    -Wignored-attributes

    transparent_union attribute can only be applied to a union definition attribute ignored

    -Wignored-attributes

    %select{alignment|size}0 of field %1 (%2 bits) does not match the %select{alignment|size}0 of the first field in transparent union transparent_union attribute ignored

    -Wignored-attributes

    attribute %0 is already applied

    -Wignored-attributes

    %0 attribute ignored for field of type %1

    -Wignored-attributes

    %0 attribute ignored when parsing type

    -Wignored-attributes

    %0 attribute only applies to %select{functions|methods|properties}1 that return %select{an Objective-C object|a pointer|a non-retainable pointer}2

    -Wignored-attributes

    %0 attribute only applies to %select{Objective-C object|pointer}1 parameters

    -Wignored-attributes

    attribute %0 is already applied with different parameters

    -Wignored-attributes

    unknown visibility %0

    -Wignored-qualifiers

    "'%0' type qualifier%s1 on return type %plural{1:has|:have}1 no effect

    -Wignored-qualifiers

    ARC %select{unused|__unsafe_unretained|__strong|__weak|__autoreleasing}0 lifetime qualifier on return type is ignored

    -Wimplicit-atomic-properties

    property is assumed atomic by default

    -Wimplicit-atomic-properties

    property is assumed atomic when auto-synthesizing the property

    -Wimplicit-fallthrough

    fallthrough annotation in unreachable code

    -Wimplicit-fallthrough

    unannotated fall-through between switch labels

    -Wimplicit-fallthrough

    fallthrough annotation does not directly precede switch label

    -Wimplicit-function-declaration

    implicit declaration of function %0

    -Wimplicit-function-declaration

    use of unknown builtin %0

    -Wimplicit-retain-self

    "block implicitly retains 'self' explicitly mention 'self' to indicate this is intended behavior

    -Wincompatible-library-redeclaration

    incompatible redeclaration of library function %0

    -Wincomplete-implementation

    method definition for %0 not found

    -Winherited-variadic-ctor

    inheriting constructor does not inherit ellipsis

    -Winitializer-overrides

    subobject initialization overrides initialization of other fields within its enclosing subobject

    -Winitializer-overrides

    initializer overrides prior initialization of this subobject

    -Wint-to-pointer-cast

    cast to %1 from smaller integer type %0

    -Wint-to-void-pointer-cast

    cast to %1 from smaller integer type %0

    -Winvalid-iboutlet

    IBOutletCollection properties should be copy/strong and not assign

    -Winvalid-iboutlet

    %select{instance variable|property}2 with %0 attribute must be an object type (invalid %1)

    -Winvalid-noreturn

    function %0 declared 'noreturn' should not return

    -Winvalid-noreturn

    function declared 'noreturn' should not return

    -Wlarge-by-value-copy

    return value of %0 is a large (%1 bytes) pass-by-value object pass it by reference instead ?

    -Wlarge-by-value-copy

    %0 is a large (%1 bytes) pass-by-value argument pass it by reference instead ?

    -Wliteral-conversion

    implicit conversion from %0 to %1 changes value from %2 to %3

    -Wliteral-range

    magnitude of floating-point constant too large for type %0 maximum is %1

    -Wliteral-range

    magnitude of floating-point constant too small for type %0 minimum is %1

    -Wlogical-not-parentheses

    logical not is only applied to the left hand side of this comparison

    -Wlogical-op-parentheses

    '&&' within '||'

    -Wloop-analysis

    variable%select{s| %1|s %1 and %2|s %1, %2, and %3|s %1, %2, %3, and %4}0 used in loop condition not modified in loop body

    -Wloop-analysis

    variable %0 is %select{decremented|incremented}1 both in the loop header and in the loop body

    -Wmethod-signatures

    conflicting parameter types in implementation of %0: %1 vs %2

    -Wmethod-signatures

    conflicting return type in implementation of %0: %1 vs %2

    -Wmicrosoft

    extra qualification on member %0

    -Wmismatched-method-attributes

    attributes on method implementation and its declaration must match

    -Wmismatched-parameter-types

    conflicting parameter types in implementation of %0%diff{: $ vs $|}1,2

    -Wmismatched-return-types

    conflicting return type in implementation of %0%diff{: $ vs $|}1,2

    -Wmissing-braces

    suggest braces around initialization of subobject

    -Wmissing-declarations

    '%0' ignored on this declaration

    -Wmissing-field-initializers

    missing field '%0' initializer

    -Wmissing-method-return-type

    method has no return type specified defaults to 'id'

    -Wmissing-noreturn

    %select{function|method}0 %1 could be declared with attribute 'noreturn'

    -Wmissing-noreturn

    block could be declared with attribute 'noreturn'

    -Wmissing-prototypes

    no previous prototype for function %0

    -Wmissing-variable-declarations

    no previous extern declaration for non-static variable %0

    -Wmultiple-move-vbase

    defaulted move assignment operator of %0 will move assign virtual base class %1 multiple times

    -Wnested-anon-types

    anonymous types declared in an anonymous union/struct are an extension

    -Wno-typedef-redefinition

    Redefinition of typedef '%0' is a C11 feature

    -Wnon-literal-null-conversion

    "expression which evaluates to zero treated as a null pointer constant of " "type %0

    -Wnon-pod-varargs

    second argument to 'va_arg' is of ARC ownership-qualified type %0

    -Wnon-pod-varargs

    cannot pass %select{non-POD|non-trivial}0 object of type %1 to variadic %select{function|block|method|constructor}2 expected type from format string was %3

    -Wnon-pod-varargs

    second argument to 'va_arg' is of non-POD type %0

    -Wnon-pod-varargs

    cannot pass object of %select{non-POD|non-trivial}0 type %1 through variadic %select{function|block|method|constructor}2 call will abort at runtime

    -Wnon-virtual-dtor

    %0 has virtual functions but non-virtual destructor

    -Wnonnull

    null passed to a callee which requires a non-null argument

    -Wnull-arithmetic

    use of NULL in arithmetic operation

    -Wnull-arithmetic

    comparison between NULL and non-pointer %select{(%1 and NULL)|(NULL and %1)}0

    -Wnull-dereference

    indirection of non-volatile null pointer will be deleted, not trap

    -Wobjc-autosynthesis-property-ivar-name-match

    autosynthesized property %0 will use %select{|synthesized}1 instance variable %2, not existing instance variable %3

    -Wobjc-forward-class-redefinition

    redefinition of forward class %0 of a typedef name of an object type is ignored

    -Wobjc-interface-ivars

    declaration of instance variables in the interface is deprecated

    -Wobjc-literal-compare

    direct comparison of %select{an array literal|a dictionary literal|a numeric literal|a boxed expression|}0 has undefined behavior

    -Wobjc-literal-missing-atsign

    string literal must be prefixed by '@'

    -Wobjc-method-access

    instance method %objcinstance0 not found (return type defaults to 'id') did you mean %objcinstance2?

    -Wobjc-method-access

    class method %objcclass0 not found (return type defaults to 'id') did you mean %objcclass2?

    -Wobjc-method-access

    instance method %objcinstance0 not found (return type defaults to 'id')

    -Wobjc-method-access

    instance method %0 is being used on 'Class' which is not in the root class

    -Wobjc-method-access

    class method %objcclass0 not found (return type defaults to 'id')

    -Wobjc-method-access

    instance method %0 found instead of class method %1

    -Wobjc-missing-property-synthesis

    "auto property synthesis is synthesizing property not explicitly synthesized

    -Wobjc-missing-super-calls

    method possibly missing a [super %0] call

    -Wobjc-noncopy-retain-block-property

    "retain'ed block property does not copy the block " "- use copy attribute instead

    -Wobjc-nonunified-exceptions

    can not catch an exception thrown with @throw in C++ in the non-unified exception model

    -Wobjc-property-implementation

    property %0 requires method %1 to be defined - use @dynamic or provide a method implementation in this category

    -Wobjc-property-implementation

    property %0 requires method %1 to be defined - use @synthesize, @dynamic or provide a method implementation in this class implementation

    -Wobjc-property-implicit-mismatch

    "primary property declaration is implicitly strong while redeclaration in class extension is weak

    -Wobjc-property-matches-cocoa-ownership-rule

    property's synthesized getter follows Cocoa naming convention for returning 'owned' objects

    -Wobjc-property-no-attribute

    no 'assign', 'retain', or 'copy' attribute is specified - 'assign' is assumed

    -Wobjc-property-no-attribute

    default property attribute 'assign' not appropriate for non-GC object

    -Wobjc-property-synthesis

    auto property synthesis will not synthesize property '%0' because it is 'readwrite' but it will be synthesized 'readonly' via another property

    -Wobjc-property-synthesis

    "auto property synthesis will not synthesize property '%0' because it cannot share an ivar with another synthesized property

    -Wobjc-protocol-method-implementation

    category is implementing a method which will also be implemented by its primary class

    -Wobjc-protocol-property-synthesis

    auto property synthesis will not synthesize property declared in a protocol

    -Wobjc-redundant-literal-use

    using %0 with a literal is redundant

    -Wobjc-root-class

    class %0 defined without specifying a base class

    -Wobjc-string-compare

    direct comparison of a string literal has undefined behavior

    -Wobjc-string-concatenation

    concatenated NSString literal for an NSArray expression - possibly missing a comma

    -Wover-aligned

    type %0 requires %1 bytes of alignment and the default allocator only guarantees %2 bytes

    -Woverloaded-shift-op-parentheses

    overloaded operator %select{|}0 has lower precedence than comparison operator

    -Woverloaded-virtual

    %q0 hides overloaded virtual %select{function|functions}1

    -Woverriding-method-mismatch

    conflicting distributed object modifiers on parameter type in declaration of %0

    -Woverriding-method-mismatch

    conflicting parameter types in declaration of %0: %1 vs %2

    -Woverriding-method-mismatch

    conflicting variadic declaration of method and its implementation

    -Woverriding-method-mismatch

    conflicting distributed object modifiers on return type in declaration of %0

    -Woverriding-method-mismatch

    conflicting parameter types in declaration of %0%diff{: $ vs $|}1,2

    -Woverriding-method-mismatch

    conflicting return type in declaration of %0%diff{: $ vs $|}1,2

    -Woverriding-method-mismatch

    conflicting return type in declaration of %0: %1 vs %2

    -Wpacked

    packed attribute is unnecessary for %0

    -Wpadded

    padding %select{struct|interface|class}0 %1 with %2 %select{byte|bit}3%select{|s}4 to align anonymous bit-field

    -Wpadded

    padding %select{struct|interface|class}0 %1 with %2 %select{byte|bit}3%select{|s}4 to align %5

    -Wpadded

    padding size of %0 with %1 %select{byte|bit}2%select{|s}3 to alignment boundary

    -Wparentheses

    using the result of an assignment as a condition without parentheses

    -Wparentheses

    %0 has lower precedence than %1 %1 will be evaluated first

    -Wparentheses

    operator '?:' has lower precedence than '%0' '%0' will be evaluated first

    -Wparentheses-equality

    equality comparison with extraneous parentheses

    -Wpointer-arith

    subtraction of pointers to type %0 of zero size has undefined behavior

    -Wpredefined-identifier-outside-function

    predefined identifier is only valid inside function

    -Wprivate-extern

    use of private_extern on a declaration may not produce external symbol private to the linkage unit and is deprecated

    -Wprotocol

    method %0 in protocol not implemented

    -Wprotocol-property-synthesis-ambiguity

    property of type %0 was selected for synthesis

    -Wreadonly-iboutlet-property

    readonly IBOutlet property '%0' when auto-synthesized may not work correctly with 'nib' loader

    -Wreadonly-setter-attrs

    property attributes '%0' and '%1' are mutually exclusive

    -Wreceiver-expr

    receiver type %0 is not 'id' or interface pointer, consider casting it to 'id'

    -Wreceiver-forward-class

    receiver type %0 for instance message is a forward declaration

    -Wreceiver-is-weak

    "weak %select{receiver|property|implicit property}0 may be unpredictably set to nil

    -Wreinterpret-base-class

    'reinterpret_cast' %select{from|to}3 class %0 %select{to|from}3 its %select{virtual base|base at non-zero offset}2 %1 behaves differently from 'static_cast'

    -Wreorder

    %select{field|base class}0 %1 will be initialized after %select{field|base}2 %3

    -Wrequires-super-attribute

    %0 attribute cannot be applied to %select{methods in protocols|dealloc}1

    -Wreturn-stack-address

    returning address of local temporary object

    -Wreturn-stack-address

    returning address of label, which is local

    -Wreturn-stack-address

    address of stack memory associated with local variable %0 returned

    -Wreturn-stack-address

    reference to stack memory associated with local variable %0 returned

    -Wreturn-stack-address

    returning reference to local temporary object

    -Wreturn-type

    control may reach end of non-void function

    -Wreturn-type

    non-void %select{function|method}1 %0 should return a value, DefaultError

    -Wreturn-type

    control reaches end of non-void function

    -Wreturn-type-c-linkage

    %0 has C-linkage specified, but returns incomplete type %1 which could be incompatible with C

    -Wreturn-type-c-linkage

    %0 has C-linkage specified, but returns user-defined type %1 which is incompatible with C

    -Wsection

    section does not match previous declaration

    -Wselector

    creating selector for nonexistent method %0

    -Wselector-type-mismatch

    multiple selectors named %0 found

    -Wself-assign

    explicitly assigning a variable of type %0 to itself

    -Wself-assign-field

    assigning %select{field|instance variable}0 to itself

    -Wsentinel

    "missing sentinel in %select{function call|method dispatch|block call}0

    -Wsentinel

    not enough variable arguments in %0 declaration to fit a sentinel

    -Wshadow

    declaration shadows a %select{" "local variable|" "variable in %2|" "static data member of %2|" "field of %2}1

    -Wshadow-ivar

    local declaration of %0 hides instance variable

    -Wshift-count-negative

    shift count is negative

    -Wshift-count-overflow

    shift count = width of type

    -Wshift-op-parentheses

    operator '%0' has lower precedence than '%1' '%1' will be evaluated first

    -Wshift-overflow

    signed shift result (%0) requires %1 bits to represent, but %2 only has %3 bits

    -Wshift-sign-overflow

    signed shift result (%0) sets the sign bit of the shift expression's type (%1) and becomes negative

    -Wshorten-64-to-32

    implicit conversion loses integer precision: %0 to %1

    -Wsign-compare

    comparison of integers of different signs: %0 and %1

    -Wsign-conversion

    implicit conversion changes signedness: %0 to %1

    -Wsign-conversion

    operand of ? changes signedness: %0 to %1

    -Wsizeof-array-argument

    sizeof on array function parameter will return size of %0 instead of %1

    -Wsizeof-array-decay

    sizeof on pointer operation will return size of %0 instead of %1

    -Wsizeof-pointer-memaccess

    '%0' call operates on objects of type %1 while the size is based on a " "different type %2

    -Wsizeof-pointer-memaccess

    argument to 'sizeof' in %0 call is the same pointer type %1 as the %select{destination|source}2 expected %3 or an explicit length

    -Wsometimes-uninitialized

    variable %0 is %select{used|captured}1 uninitialized whenever %select{'%3' condition is %select{true|false}4|'%3' loop %select{is entered|exits because its condition is false}4|'%3' loop %select{condition is true|exits because its condition is false}4|switch %3 is taken|its declaration is reached|%3 is called}2

    -Wstatic-local-in-inline

    non-constant static local variable in inline function may be different in different files

    -Wstatic-self-init

    static variable %0 is suspiciously used within its own initialization

    -Wstrict-selector-match

    multiple methods named %0 found

    -Wstring-compare

    result of comparison against %select{a string literal|@encode}0 is unspecified (use strncmp instead)

    -Wstring-conversion

    implicit conversion turns string literal into bool: %0 to %1

    -Wstring-plus-char

    adding %0 to a string pointer does not append to the string

    -Wstring-plus-int

    adding %0 to a string does not append to the string

    -Wstrlcpy-strlcat-size

    size argument in %0 call appears to be size of the source expected the size of the destination

    -Wstrncat-size

    the value of the size argument in 'strncat' is too large, might lead to a " "buffer overflow

    -Wstrncat-size

    size argument in 'strncat' call appears " "to be size of the source

    -Wstrncat-size

    the value of the size argument to 'strncat' is wrong

    -Wsuper-class-method-mismatch

    method parameter type %diff{$ does not match super class method parameter type $|does not match super class method parameter type}0,1

    -Wswitch

    overflow converting case value to switch condition type (%0 to %1)

    -Wswitch

    case value not in enumerated type %0

    -Wswitch

    %0 enumeration values not handled in switch: %1, %2, %3...

    -Wswitch

    enumeration values %0 and %1 not handled in switch

    -Wswitch

    enumeration value %0 not handled in switch

    -Wswitch

    enumeration values %0, %1, and %2 not handled in switch

    -Wswitch-enum

    enumeration values %0, %1, and %2 not explicitly handled in switch

    -Wswitch-enum

    enumeration values %0 and %1 not explicitly handled in switch

    -Wswitch-enum

    %0 enumeration values not explicitly handled in switch: %1, %2, %3...

    -Wswitch-enum

    enumeration value %0 not explicitly handled in switch

    -Wtautological-compare

    comparison of %0 unsigned%select{| enum}2 expression is always %1

    -Wtautological-compare

    %select{self-|array }0comparison always evaluates to %select{false|true|a constant}1

    -Wtautological-compare

    comparison of unsigned%select{| enum}2 expression %0 is always %1

    -Wtautological-constant-out-of-range-compare

    comparison of constant %0 with expression of type %1 is always %select{false|true}2

    -Wthread-safety-analysis

    locking '%0' that is already locked

    -Wthread-safety-analysis

    cannot call function '%0' while mutex '%1' is locked

    -Wthread-safety-analysis

    %select{reading|writing}2 the value pointed to by '%0' requires locking %select{'%1'|'%1' exclusively}2

    -Wthread-safety-analysis

    unlocking '%0' that was not locked

    -Wthread-safety-analysis

    mutex '%0' is locked exclusively and shared in the same scope

    -Wthread-safety-analysis

    calling function '%0' requires %select{shared|exclusive}2 lock on '%1'

    -Wthread-safety-analysis

    %select{reading|writing}2 variable '%0' requires locking %select{'%1'|'%1' exclusively}2

    -Wthread-safety-analysis

    cannot resolve lock expression

    -Wthread-safety-analysis

    expecting mutex '%0' to be locked at the end of function

    -Wthread-safety-analysis

    mutex '%0' is not locked on every path through here

    -Wthread-safety-analysis

    %select{reading|writing}1 the value pointed to by '%0' requires locking %select{any mutex|any mutex exclusively}1

    -Wthread-safety-analysis

    %select{reading|writing}1 variable '%0' requires locking %select{any mutex|any mutex exclusively}1

    -Wthread-safety-analysis

    mutex '%0' is still locked at the end of function

    -Wthread-safety-analysis

    expecting mutex '%0' to be locked at start of each loop

    -Wthread-safety-attributes

    ignoring %0 attribute because its argument is invalid

    -Wthread-safety-attributes

    %0 attribute only applies to %select{fields and global variables|functions and methods|classes and structs}1

    -Wthread-safety-attributes

    %0 attribute requires arguments that are class type or point to class type type here is '%1'

    -Wthread-safety-attributes

    %0 attribute can only be applied in a context annotated with 'lockable' attribute

    -Wthread-safety-attributes

    %0 attribute requires arguments whose type is annotated with 'lockable' attribute type here is '%1'

    -Wthread-safety-attributes

    '%0' only applies to pointer types type here is %1

    -Wthread-safety-beta

    Thread safety beta warning.

    -Wthread-safety-precise

    %select{reading|writing}2 the value pointed to by '%0' requires locking %select{'%1'|'%1' exclusively}2

    -Wthread-safety-precise

    %select{reading|writing}2 variable '%0' requires locking %select{'%1'|'%1' exclusively}2

    -Wthread-safety-precise

    calling function '%0' requires %select{shared|exclusive}2 lock on '%1'

    -Wtype-safety

    this type tag was not designed to be used with this function

    -Wtype-safety

    specified %0 type tag requires a null pointer

    -Wtype-safety

    argument type %0 doesn't match specified '%1' type tag %select{that requires %3|}2

    -Wundeclared-selector

    undeclared selector %0 did you mean %1?

    -Wundeclared-selector

    undeclared selector %0

    -Wundefined-inline

    inline function %q0 is not defined

    -Wundefined-internal

    %select{function|variable}0 %q1 has internal linkage but is not defined

    -Wundefined-reinterpret-cast

    dereference of type %1 that was reinterpret_cast from type %0 has undefined behavior

    -Wundefined-reinterpret-cast

    reinterpret_cast from %0 to %1 has undefined behavior

    -Wuninitialized

    reference %0 is not yet bound to a value when used within its own initialization

    -Wuninitialized

    field %0 is uninitialized when used here

    -Wuninitialized

    block pointer variable %0 is uninitialized when captured by block

    -Wuninitialized

    variable %0 is uninitialized when used within its own initialization

    -Wuninitialized

    variable %0 is uninitialized when %select{used here|captured by block}1

    -Wuninitialized

    reference %0 is not yet bound to a value when used here

    -Wunneeded-internal-declaration

    %select{function|variable}0 %1 is not needed and will not be emitted

    -Wunneeded-internal-declaration

    'static' function %0 declared in header file should be declared 'static inline'

    -Wunneeded-member-function

    member function %0 is not needed and will not be emitted

    -Wunreachable-code

    will never be executed

    -Wunsequenced

    multiple unsequenced modifications to %0

    -Wunsequenced

    unsequenced modification and access to %0

    -Wunsupported-friend

    dependent nested name specifier '%0' for friend template declaration is not supported ignoring this friend declaration

    -Wunsupported-friend

    dependent nested name specifier '%0' for friend class declaration is not supported turning off access control for %1

    -Wunsupported-visibility

    target does not support 'protected' visibility using 'default'

    -Wunused-comparison

    %select{equality|inequality}0 comparison result unused

    -Wunused-const-variable

    unused variable %0

    -Wunused-exception-parameter

    unused exception parameter %0

    -Wunused-function

    unused function %0

    -Wunused-label

    unused label %0

    -Wunused-member-function

    unused member function %0

    -Wunused-parameter

    unused parameter %0

    -Wunused-private-field

    private field %0 is not used

    -Wunused-property-ivar

    ivar %0 which backs the property is not referenced in this property's accessor

    -Wunused-result

    ignoring return value of function declared with warn_unused_result attribute

    -Wunused-value

    ignoring return value of function declared with %0 attribute

    -Wunused-value

    expression result unused should this cast be to 'void'?

    -Wunused-value

    expression result unused

    -Wunused-variable

    unused variable %0

    -Wunused-volatile-lvalue

    expression result unused assign into a variable to force a volatile load

    -Wused-but-marked-unused

    %0 was marked unused but was used

    -Wuser-defined-literals

    user-defined literal suffixes not starting with '_' are reserved%select{ no literal will invoke this operator|}0

    -Wvarargs

    second parameter of 'va_start' not last named argument

    -Wvarargs

    'va_start' has undefined behavior with reference types

    -Wvarargs

    second argument to 'va_arg' is of promotable type %0 this va_arg has undefined behavior because arguments will be promoted to %1

    -Wvector-conversion

    incompatible vector types %select{%diff{assigning to $ from $|assigning to different types}0,1|%diff{passing $ to parameter of type $|passing to parameter of different type}0,1|%diff{returning $ from a function with result type $|returning from function with different return type}0,1|%diff{converting $ to type $|converting between types}0,1|%diff{initializing $ with an expression of type $|initializing with expression of different type}0,1|%diff{sending $ to parameter of type $|sending to parameter of different type}0,1|%diff{casting $ to type $|casting between types}0,1}2

    -Wvexing-parse

    parentheses were disambiguated as a function declaration

    -Wvexing-parse

    empty parentheses interpreted as a function declaration

    -Wvisibility

    declaration of %0 will not be visible outside of this function

    -Wvisibility

    redefinition of %0 will not be visible outside of this function

    -Wvla

    variable length array used

    -Wvla-extension

    variable length arrays are a C99 feature

    -Wweak-template-vtables

    explicit template instantiation %0 will emit a vtable in every translation unit

    -Wweak-vtables

    %0 has no out-of-line virtual method definitions; its vtable will be emitted in every translation unit

    Lexer Warnings
    Warning
    Message

    -W#pragma-messages

    %0

    -W#warnings

    %0

    -W#warnings

    %0

    -Wambiguous-macro

    ambiguous expansion of macro %0

    -Wauto-import

    treating #%select{include|import|include_next|__include_macros}0 as an import of module '%1'

    -Wbackslash-newline-escape

    backslash and newline separated by space

    -Wc++11-compat

    identifier after literal will be treated as a user-defined literal suffix in C++11

    -Wc++11-compat

    '%0' is a keyword in C++11

    -Wc++98-c++11-compat

    digit separators are incompatible with C++ standards before C++1y

    -Wc++98-c++11-compat-pedantic

    binary integer literals are incompatible with C++ standards before C++1y

    -Wc++98-compat

    raw string literals are incompatible with C++98

    -Wc++98-compat

    unicode literals are incompatible with C++98

    -Wc++98-compat

    universal character name referring to a control character is incompatible with C++98

    -Wc++98-compat

    '::' is treated as digraph ':' (aka '[') followed by ':' in C++98

    -Wc++98-compat

    using this character in an identifier is incompatible with C++98

    -Wc++98-compat

    specifying character '%0' with a universal character name is incompatible with C++98

    -Wc++98-compat-pedantic

    variadic macros are incompatible with C++98

    -Wc++98-compat-pedantic

    line number greater than 32767 is incompatible with C++98

    -Wc++98-compat-pedantic

    C++98 requires newline at end of file

    -Wc++98-compat-pedantic

    empty macro arguments are incompatible with C++98

    -Wc99-compat

    unicode literals are incompatible with C99

    -Wc99-compat

    %select{using this character in an identifier|starting an identifier with this character}0 is incompatible with C99

    -Wcomment

    '/*' within block comment

    -Wcomment

    escaped newline between */ characters at block comment end

    -Wdisabled-macro-expansion

    disabled expansion of recursive macro

    -Wheader-guard

    %0 is used as a header guard here, followed by #define of a different macro

    -Wignored-attributes

    unknown attribute '%0'

    -Wincomplete-module

    header '%0' is included in module '%1' but not listed in module map

    -Wincomplete-umbrella

    umbrella header for module '%0' does not include header '%1'

    -Winvalid-token-paste

    pasting formed '%0', an invalid preprocessing token, DefaultError

    -Wmalformed-warning-check

    __has_warning expected option name (e.g. "-Wundef")

    -Wnewline-eof

    no newline at end of file

    -Wnull-character

    null character ignored

    -Wnull-character

    null character(s) preserved in string literal

    -Wnull-character

    null character(s) preserved in character literal

    -Wtrigraphs

    ignored trigraph would end block comment

    -Wtrigraphs

    trigraph ignored

    -Wundef

    %0 is not defined, evaluates to 0

    -Wunicode

    universal character names are only valid in C99 or C++ treating as '\' followed by identifier

    -Wunicode

    \%0 used with no following hex digits treating as '\' followed by identifier

    -Wunicode

    incomplete universal character name treating as '\' followed by identifier

    -Wunicode

    universal character name refers to a surrogate character

    -Wunknown-pragmas

    unknown pragma ignored

    -Wunknown-pragmas

    pragma STDC FENV_ACCESS ON is not supported, ignoring pragma

    -Wunused-macros

    macro is not used

    Parser Warnings
    Warning
    Message

    -Warc-bridge-casts-disallowed-in-nonarc

    '%0' casts have no effect when not using ARC

    -Wattributes

    unknown __declspec attribute %0 ignored

    -Wavailability

    'unavailable' availability overrides all other availability information

    -Wc++11-compat

    use of right-shift operator ('') in template argument will require parentheses in C++11

    -Wc++11-compat

    'auto' storage class specifier is redundant and incompatible with C++11

    -Wc++98-c++11-compat

    'decltype(auto)' type specifier is incompatible with C++ standards before C++1y

    -Wc++98-compat

    range-based for loop is incompatible with C++98

    -Wc++98-compat

    alias declarations are incompatible with C++98

    -Wc++98-compat

    in-class initialization of non-static data members is incompatible with C++98

    -Wc++98-compat

    defaulted function definitions are incompatible with C++98

    -Wc++98-compat

    rvalue references are incompatible with C++98

    -Wc++98-compat

    reference qualifiers on functions are incompatible with C++98

    -Wc++98-compat

    inline namespaces are incompatible with C++98

    -Wc++98-compat

    generalized initializer lists are incompatible with C++98

    -Wc++98-compat

    trailing return types are incompatible with C++98

    -Wc++98-compat

    enumeration types with a fixed underlying type are incompatible with C++98

    -Wc++98-compat

    alignof expressions are incompatible with C++98

    -Wc++98-compat

    '%0' keyword is incompatible with C++98

    -Wc++98-compat

    'decltype' type specifier is incompatible with C++98

    -Wc++98-compat

    deleted function definitions are incompatible with C++98

    -Wc++98-compat

    consecutive right angle brackets are incompatible with C++98 (use '> >')

    -Wc++98-compat

    static_assert declarations are incompatible with C++98

    -Wc++98-compat

    scoped enumerations are incompatible with C++98

    -Wc++98-compat

    lambda expressions are incompatible with C++98

    -Wc++98-compat

    attributes are incompatible with C++98

    -Wc++98-compat

    'alignas' is incompatible with C++98

    -Wc++98-compat

    noexcept specifications are incompatible with C++98

    -Wc++98-compat

    literal operators are incompatible with C++98

    -Wc++98-compat

    noexcept expressions are incompatible with C++98

    -Wc++98-compat

    'nullptr' is incompatible with C++98

    -Wc++98-compat-pedantic

    extra '' outside of a function is incompatible with C++98

    -Wc++98-compat-pedantic

    extern templates are incompatible with C++98

    -Wc++98-compat-pedantic

    commas at the end of enumerator lists are incompatible with C++98

    -Wdangling-else

    add explicit braces to avoid dangling else

    -Wdeprecated

    Use of 'long' with '__vector' is deprecated

    -Wdeprecated-declarations

    use of C-style parameters in Objective-C method declarations is deprecated

    -Wdeprecated-register

    'register' storage class specifier is deprecated

    -Wduplicate-decl-specifier

    duplicate '%0' declaration specifier

    -Wextra-semi

    extra ';' after member function definition

    -Wextra-tokens

    "extra tokens at the end of '#pragma omp %0' are ignored

    -Wgcc-compat

    GCC does not allow %0 attribute in this position on a function definition

    -Wignored-attributes

    attribute %0 ignored, because it is not attached to a declaration

    -Wmicrosoft-exists

    dependent %select{__if_not_exists|__if_exists}0 declarations are ignored

    -Wmissing-selector-name

    %0 used as the name of the previous parameter rather than as part of the selector

    -Wsemicolon-before-method-body

    semicolon before method body is ignored

    -Wsource-uses-openmp

    "unexpected '#pragma omp ...' in program

    -Wstatic-inline-explicit-instantiation

    ignoring '%select{static|inline}0' keyword on explicit template instantiation

    Created by Mattt Thompson, and released under the NCSA License. Source code available on GitHub.
    Generated from Clang's source code, through a combination of regular expressions, find & replace, and scripting.
    Like Objective-C and swearing, but can't remember block syntax? There's a site for that, too.
    Last updated March 06, 2015
    .

    相关文章

      网友评论

          本文标题:iOS Clang Warning

          本文链接:https://www.haomeiwen.com/subject/fvkikttx.html