美文网首页cocos2d-Lua
cocos2d-x lua 3.16 的一些utf8方法

cocos2d-x lua 3.16 的一些utf8方法

作者: 人气小哥 | 来源:发表于2018-11-15 14:06 被阅读0次

    原文: https://github.com/airtonix/ouf_tags/edit/master/utf8.lua

    --===========================--
    --===========================--
    
    -- $Id: utf8.lua 147 2007-01-04 00:57:00Z pasta $
    --
    -- Provides UTF-8 aware string functions implemented in pure lua:
    -- * string.utf8len(s)
    -- * string.utf8sub(s, i, j)
    -- * string.utf8reverse(s)
    --
    -- If utf8data.lua (containing the lower<->upper case mappings) is loaded, these
    -- additional functions are available:
    -- * string.utf8upper(s)
    -- * string.utf8lower(s)
    --
    -- All functions behave as their non UTF-8 aware counterparts with the exception
    -- that UTF-8 characters are used instead of bytes for all units.
    
    --[[
    Copyright (c) 2006-2007, Kyle Smith
    All rights reserved.
    
    Redistribution and use in source and binary forms, with or without
    modification, are permitted provided that the following conditions are met:
    
        * Redistributions of source code must retain the above copyright notice,
          this list of conditions and the following disclaimer.
        * Redistributions in binary form must reproduce the above copyright
          notice, this list of conditions and the following disclaimer in the
          documentation and/or other materials provided with the distribution.
        * Neither the name of the author nor the names of its contributors may be
          used to endorse or promote products derived from this software without
          specific prior written permission.
    
    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
    AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
    IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
    FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
    DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
    SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
    CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
    OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
    --]]
    
    -- ABNF from RFC 3629
    -- 
    -- UTF8-octets = *( UTF8-char )
    -- UTF8-char   = UTF8-1 / UTF8-2 / UTF8-3 / UTF8-4
    -- UTF8-1      = %x00-7F
    -- UTF8-2      = %xC2-DF UTF8-tail
    -- UTF8-3      = %xE0 %xA0-BF UTF8-tail / %xE1-EC 2( UTF8-tail ) /
    --               %xED %x80-9F UTF8-tail / %xEE-EF 2( UTF8-tail )
    -- UTF8-4      = %xF0 %x90-BF 2( UTF8-tail ) / %xF1-F3 3( UTF8-tail ) /
    --               %xF4 %x80-8F 2( UTF8-tail )
    -- UTF8-tail   = %x80-BF
    -- 
    
    -- returns the number of bytes used by the UTF-8 character at byte i in s
    -- also doubles as a UTF-8 character validator
    local function utf8charbytes (s, i)
        -- argument defaults
        i = i or 1
    
        -- argument checking
        if type(s) ~= "string" then
            error("bad argument #1 to 'utf8charbytes' (string expected, got ".. type(s).. ")")
        end
        if type(i) ~= "number" then
            error("bad argument #2 to 'utf8charbytes' (number expected, got ".. type(i).. ")")
        end
    
        local c = s:byte(i)
    
        -- determine bytes needed for character, based on RFC 3629
        -- validate byte 1
        if c > 0 and c <= 127 then
            -- UTF8-1
            return 1
    
        elseif c >= 194 and c <= 223 then
            -- UTF8-2
            local c2 = s:byte(i + 1)
    
            if not c2 then
                error("UTF-8 string terminated early")
            end
    
            -- validate byte 2
            if c2 < 128 or c2 > 191 then
                error("Invalid UTF-8 character")
            end
    
            return 2
    
        elseif c >= 224 and c <= 239 then
            -- UTF8-3
            local c2 = s:byte(i + 1)
            local c3 = s:byte(i + 2)
    
            if not c2 or not c3 then
                error("UTF-8 string terminated early")
            end
    
            -- validate byte 2
            if c == 224 and (c2 < 160 or c2 > 191) then
                error("Invalid UTF-8 character")
            elseif c == 237 and (c2 < 128 or c2 > 159) then
                error("Invalid UTF-8 character")
            elseif c2 < 128 or c2 > 191 then
                error("Invalid UTF-8 character")
            end
    
            -- validate byte 3
            if c3 < 128 or c3 > 191 then
                error("Invalid UTF-8 character")
            end
    
            return 3
    
        elseif c >= 240 and c <= 244 then
            -- UTF8-4
            local c2 = s:byte(i + 1)
            local c3 = s:byte(i + 2)
            local c4 = s:byte(i + 3)
    
            if not c2 or not c3 or not c4 then
                error("UTF-8 string terminated early")
            end
    
            -- validate byte 2
            if c == 240 and (c2 < 144 or c2 > 191) then
                error("Invalid UTF-8 character")
            elseif c == 244 and (c2 < 128 or c2 > 143) then
                error("Invalid UTF-8 character")
            elseif c2 < 128 or c2 > 191 then
                error("Invalid UTF-8 character")
            end
            
            -- validate byte 3
            if c3 < 128 or c3 > 191 then
                error("Invalid UTF-8 character")
            end
    
            -- validate byte 4
            if c4 < 128 or c4 > 191 then
                error("Invalid UTF-8 character")
            end
    
            return 4
    
        else
            error("Invalid UTF-8 character")
        end
    end
    
    
    -- returns the number of characters in a UTF-8 string
    local function utf8len (s)
        -- argument checking
        if type(s) ~= "string" then
            error("bad argument #1 to 'utf8len' (string expected, got ".. type(s).. ")")
        end
    
        local pos = 1
        local bytes = s:len()
        local len = 0
    
        while pos <= bytes and len ~= chars do
            local c = s:byte(pos)
            len = len + 1
    
            pos = pos + utf8charbytes(s, pos)
        end
    
        if chars ~= nil then
            return pos - 1
        end
    
        return len
    end
    
    -- install in the string library
    if not string.utf8len then
        string.utf8len = utf8len
    end
    
    
    -- functions identically to string.sub except that i and j are UTF-8 characters
    -- instead of bytes
    local function utf8sub (s, i, j)
        -- argument defaults
        j = j or -1
    
        -- argument checking
        if type(s) ~= "string" then
            error("bad argument #1 to 'utf8sub' (string expected, got ".. type(s).. ")")
        end
        if type(i) ~= "number" then
            error("bad argument #2 to 'utf8sub' (number expected, got ".. type(i).. ")")
        end
        if type(j) ~= "number" then
            error("bad argument #3 to 'utf8sub' (number expected, got ".. type(j).. ")")
        end
    
        local pos = 1
        local bytes = s:len()
        local len = 0
    
        -- only set l if i or j is negative
        local l = (i >= 0 and j >= 0) or s:utf8len()
        local startChar = (i >= 0) and i or l + i + 1
        local endChar   = (j >= 0) and j or l + j + 1
    
        -- can't have start before end!
        if startChar > endChar then
            return ""
        end
    
        -- byte offsets to pass to string.sub
        local startByte, endByte = 1, bytes
    
        while pos <= bytes do
            len = len + 1
    
            if len == startChar then
                startByte = pos
            end
    
            pos = pos + utf8charbytes(s, pos)
    
            if len == endChar then
                endByte = pos - 1
                break
            end
        end
    
        return s:sub(startByte, endByte)
    end
    
    -- install in the string library
    if not string.utf8sub then
        string.utf8sub = utf8sub
    end
    
    
    -- replace UTF-8 characters based on a mapping table
    local function utf8replace (s, mapping)
        -- argument checking
        if type(s) ~= "string" then
            error("bad argument #1 to 'utf8replace' (string expected, got ".. type(s).. ")")
        end
        if type(mapping) ~= "table" then
            error("bad argument #2 to 'utf8replace' (table expected, got ".. type(mapping).. ")")
        end
    
        local pos = 1
        local bytes = s:len()
        local charbytes
        local newstr = ""
    
        while pos <= bytes do
            charbytes = utf8charbytes(s, pos)
            local c = s:sub(pos, pos + charbytes - 1)
    
            newstr = newstr .. (mapping[c] or c)
    
            pos = pos + charbytes
        end
    
        return newstr
    end
    
    
    -- identical to string.upper except it knows about unicode simple case conversions
    local function utf8upper (s)
        return utf8replace(s, utf8_lc_uc)
    end
    
    -- install in the string library
    if not string.utf8upper and utf8_lc_uc then
        string.utf8upper = utf8upper
    end
    
    
    -- identical to string.lower except it knows about unicode simple case conversions
    local function utf8lower (s)
        return utf8replace(s, utf8_uc_lc)
    end
    
    -- install in the string library
    if not string.utf8lower and utf8_uc_lc then
        string.utf8lower = utf8lower
    end
    
    
    -- identical to string.reverse except that it supports UTF-8
    local function utf8reverse (s)
        -- argument checking
        if type(s) ~= "string" then
            error("bad argument #1 to 'utf8reverse' (string expected, got ".. type(s).. ")")
        end
    
        local bytes = s:len()
        local pos = bytes
        local charbytes
        local newstr = ""
    
        while pos > 0 do
            c = s:byte(pos)
            while c >= 128 and c <= 191 do
                pos = pos - 1
                c = s:byte(pos)
            end
    
            charbytes = utf8charbytes(s, pos)
    
            newstr = newstr .. s:sub(pos, pos + charbytes - 1)
    
            pos = pos - 1
        end
    
        return newstr
    end
    
    -- install in the string library
    if not string.utf8reverse then
        string.utf8reverse = utf8reverse
    end
    
    
    

    相关文章

      网友评论

        本文标题:cocos2d-x lua 3.16 的一些utf8方法

        本文链接:https://www.haomeiwen.com/subject/fxryfqtx.html