GrayLog + ElasticSearch 容器化

作者: Secret_Sun | 来源:发表于2019-06-22 00:58 被阅读0次

为什么要容器化，部署快速是关键，基于云的AMI，直接 AMI 「packer可以直接构建ami 要学习下，还不会」 + ansible + docker 一把拉起服务「Infrastracture as Code 进行到底」，看着都很炫酷。

版本问题

# hub.docker.com 直接拉取
docker pull elasticsearch:6.8.0
docker pull graylog/graylog:3.0.2
docker pull mongo:3.6.12

目录说明

conf --- 配文件
- elasticsearch
- graylog
plugin --- 插件
- elasticsearch
- graylog
- 包含地图 & 监控插件

主机基础参数初始化

ansible-playbook -C -s -e"host=xxxxx" -u secret.sun -i hosts-file init.yml

---
- hosts: "{{ host }}"
  tasks:
    - name: Set sysctl file limits
      pam_limits:
        dest: "/etc/security/limits.conf"
        domain: '{{ item.limit_domain }}'
        limit_type: "{{ item.limit_type }}"
        limit_item: "{{ item.limit_item }}"
        value: "{{ item.value }}"
      with_items:
          - { limit_domain: 'root',limit_type: 'soft',limit_item: 'nofile', value: '655360' }
          - { limit_domain: 'root',limit_type: 'hard',limit_item: 'nofile', value: '655360' }
          - { limit_domain: '*',limit_type: 'soft',limit_item: 'core', value: '0' }
          - { limit_domain: '*',limit_type: 'hard',limit_item: 'core', value: '0' }
          - { limit_domain: '*',limit_type: 'soft',limit_item: 'nproc', value: '655360' }
          - { limit_domain: '*',limit_type: 'hard',limit_item: 'nproc', value: '655360' }
          - { limit_domain: '*',limit_type: 'soft',limit_item: 'stack', value: 'unlimited' }
          - { limit_domain: '*',limit_type: 'hard',limit_item: 'stack', value: 'unlimited' }
          - { limit_domain: '*',limit_type: 'soft',limit_item: 'nofile', value: '655360' }
          - { limit_domain: '*',limit_type: 'hard',limit_item: 'nofile', value: '655360' }
          - { limit_domain: '*',limit_type: 'soft',limit_item: 'memlock', value: 'unlimited' }
          - { limit_domain: '*',limit_type: 'hard',limit_item: 'memlock', value: 'unlimited' }
      tags: change-limits

    - name: Set systemd limits
      lineinfile:
         dest: "/etc/systemd/system.conf"
         line: "{{ item.line }}"
         state: present
      with_items: 
         - {line: 'DefaultLimitNOFILE=65535' }
         - {line: 'DefaultLimitNPROC=65535' }
         - {line: 'DefaultLimitMEMLOCK=infinity' }
      tags: change-limits

    - name: SystemCtl daemon-reload
      command: systemctl daemon-reload
      tags: daemon-reload

#    - name: Close Iptables
#      systemd:
#         name: firewalld
#         enabled: False
#         state: stopped
#      tags: close-iptables

    - name: Change /etc/sysctl.conf
      sysctl: name={{ item.key }} value={{ item.value }}
      with_items:
       - { key: "vm.max_map_count", value: "655360" }
       - { key: "vm.swappiness", value: "0" }
       - { key: "net.ipv4.tcp_fin_timeout", value: "3" }
       - { key: "net.ipv4.tcp_max_tw_buckets", value: "300000" }
       - { key: "net.ipv4.tcp_max_orphans", value: "655360" }
       - { key: "net.ipv4.ip_forward", value: "1" }
       - { key: "net.bridge.bridge-nf-call-iptables", value: "1" }
       - { key: "fs.file-max", value: "655360" }
      tags: Change-sysctl-conf

    - name: Load sysctl
      command: sysctl -p
      tags: load-sysctl

    # Ubuntu 16.04.5 LTS
    - name: Add alicloud software source
      apt_repository: 
        repo: '{{ item }}' 
        state: present 
      with_items:
        - deb http://mirrors.aliyun.com/ubuntu/ xenial main restricted universe multiverse
        - deb http://mirrors.aliyun.com/ubuntu/ xenial-security main restricted universe multiverse
        - deb http://mirrors.aliyun.com/ubuntu/ xenial-updates main restricted universe multiverse
        - deb http://mirrors.aliyun.com/ubuntu/ xenial-proposed main restricted universe multiverse
        - deb http://mirrors.aliyun.com/ubuntu/ xenial-backports main restricted universe multiverse
        - deb-src http://mirrors.aliyun.com/ubuntu/ xenial main restricted universe multiverse
        - deb-src http://mirrors.aliyun.com/ubuntu/ xenial-security main restricted universe multiverse
        - deb-src http://mirrors.aliyun.com/ubuntu/ xenial-updates main restricted universe multiverse
        - deb-src http://mirrors.aliyun.com/ubuntu/ xenial-proposed main restricted universe multiverse
        - deb-src http://mirrors.aliyun.com/ubuntu/ xenial-backports main restricted universe multiverse
      tags: add_alicloud_source

    - name: Apt Update
      command: apt-get update
      tags: add_alicloud_source

    - name: Create Dir
      command: mkdir -p /{{ item }}
      with_items:
        - data
      tags: disk_xvdg

    - name: mkfs.xfs -f Disk
      command: mkfs.xfs -f {{ item }}
      with_items:
       - /dev/xvdg
      tags: disk_xvdg

    - name: Mount Disk
      command: mount {{ item.disk }} {{ item.catalogue }}
      with_items:
        - { disk: '/dev/xvdg', catalogue: '/data' }
      tags: disk_xvdg

    - name: Write /etc/fstab
      shell: echo "UUID=$(blkid {{ item.disk }} | awk -F\" '{print $2}') {{ item.catalogue }}             xfs     defaults,noatime,nodiratime,nobarrier 1 2" >> /etc/fstab
      with_items:
       - { disk: '/dev/xvdg', catalogue: '/data' }
      tags: disk_xvdg

    - name: Mount -a Disk
      command: mount -a

MongoDB 部署

ansible-playbook -C -s -e"host=xxxxx" -u secret.sun -i hosts-file mongodb_init.yml

---
- hosts: "{{ host }}"
  tasks:
    - name: Docker Pull MongoDB
      command: docker pull mongo:3.6.12
      tags: docker_pull
      
    - name: Create Dir
      command: mkdir -p /data/{{ item }}
      with_items:
        - configdb
        - db
        - logs
      tags: create_base_dir

    - stat: path=/data/logs/mongod.log
      register: p

    - name: Touch /data/logs/mongod.log
      file: path=/data/logs/mongod.log
            owner=root
            group=sys
            mode=0777
            state={{ "file" if  p.stat.exists else "touch"}}
      tags: touch_mongod.log

    - name: Apt Instll mongodb-clients
      command: apt-get install mongodb-clients -y
      tags: install_mongodb_clients

    - name: Scp MongoDB Conf
      copy: src=conf/mongodb.conf dest=/data/configdb/mongodb.conf backup=yes
      tags: scp_conf

    - name: Docker Run
      command: docker run -it -d -p 27017:27017 \
         -v /data/configdb:/data/configdb \
         -v /data/db:/data/db \
         -v /data/logs:/data/logs \
         --name mongo \
         --restart=always \
         -m 6g \
         mongo:3.6.12 mongod --config /data/configdb/mongodb.conf --replSet graylog
      tags: docker_run

数据库初始化

#登陆数据库
mongo --host 127.0.0.1 --port 27017 -u root -p --authenticationDatabase admin
use admin
db.auth("root", "xxxxx")

use admin
db.createUser(
  {
    user: "root",
    pwd: "123456",
    roles: [ { role: "userAdminAnyDatabase", db: "admin" } ]
  }
)

#初始化副本集
rs.initiate({
    _id: 'graylog',
    members: [
      { _id: 0, host: '127.0.0.1:27017' },
      { _id: 1, host: '127.0.0.1:27017' },
      { _id: 2 ,host: '127.0.0.1:27017' }
  ]
})
rs.conf()

ElasticSearch

参数说明

discovery_ip --- Es 自动发现 ip 列表 (填写master地址)
cluster_name --- 集群名

master & search

#目录初始化
ansible-playbook -C -s -e"host=master,search" -u secret.sun -i hosts-file -t create_es_base_dir es_disk_init.yml

#安装 master
ansible-playbook -C -s -e"host=master discovery_ip=['xxxx','xxxx','xxxx'] cluster_name=xxxx" -u secret.sun -i hosts-file -t docker_pull,run_base,change_conf_master es_init.yml

#安装 search
ansible-playbook -C -s -e"host=search discovery_ip=['xxxx','xxxx','xxxx'] cluster_name=xxxx" -u secret.sun -i hosts-file -t docker_pull,run_base,change_conf_search es_init.yml

data

#目录初始化
ansible-playbook -C -s -e"host=data" -u secret.sun -i hosts-file es_disk_init.yml

# 安装 data
ansible-playbook -C -s -e"host=data discovery_ip=['xxxx','xxxx','xxxx'] cluster_name=xxxx" -u secret.sun -i hosts-file -t docker_pull,run_base,change_conf_data es_init.yml

修改配置

#master
ansible-playbook -C -s -e"host=master discovery_ip=['xxxx','xxxx','xxxx'] cluster_name=xxxx" -u secret.sun -i hosts-file -t run_base,change_conf_master es_init.yml
#search
ansible-playbook -C -s -e"host=search discovery_ip=['xxxx','xxxx','xxxx'] cluster_name=xxxx" -u secret.sun -i hosts-file -t run_base,change_conf_search es_init.yml
#data
ansible-playbook -C -s -e"host=data discovery_ip=['xxxx','xxxx','xxxx'] cluster_name=xxxx" -u secret.sun -i hosts-file -t run_base,change_conf_data es_init.yml

启动

#master & search
ansible-playbook -C -s -e"host=master,search" -u secret.sun -i hosts-file -t docker_run_master_search es_init.yml
#data
ansible-playbook -C -s -e"host=data" -u secret.sun -i hosts-file -t docker_run_data es_init.yml

PlayBook

# es_disk_init.yml
---
- hosts: "{{ host }}"
  tasks:
    - name: Create Dir
      command: mkdir -p /{{ item }}
      with_items:
        - data1
      tags: disk_nvme0n1

    - name: mkfs.xfs -f Disk
      command: mkfs.xfs -f {{ item }}
      with_items:
       - /dev/nvme0n1
      tags: disk_nvme0n1

    - name: Mount Disk
      command: mount {{ item.disk }} {{ item.catalogue }}
      with_items:
        - { disk: '/dev/nvme0n1', catalogue: '/data1' }
      tags: disk_nvme0n1

    - name: Write /etc/fstab
      shell: echo "UUID=$(blkid {{ item.disk }} | awk -F\" '{print $2}') {{ item.catalogue }}             xfs     defaults,noatime,nodiratime,nobarrier 1 2" >> /etc/fstab
      with_items:
       - { disk: '/dev/nvme0n1', catalogue: '/data1' }
      tags: disk_nvme0n1

    - name: Mount -a Disk
      command: mount -a
      tags: disk_nvme0n1

    - name: Create Es Conf & Logs & Plugins Dir
      file: path=/data/elasticsearch/{{ item }} state=directory mode=0777
      with_items:
        - logs
        - config
        - plugins
        - data
      tags: create_es_base_dir

    - name: Create Es Data Dir
      file: path=/data1/elasticsearch/{{ item }} state=directory mode=0777
      with_items:
        - data
      tags: create_es_data_dir

# es_init.yml
---
- hosts: "{{ host }}"
  tasks:
      - name: Docker Pull ElasticSearch
        command: docker pull elasticsearch:6.8.0
        tags: docker_pull

      - name: Scp Base Config
        copy: src=conf/elasticsearch/{{ item }} dest=/data/elasticsearch/config/{{ item }} backup=yes
        with_items:
          - elasticsearch.yml
          - jvm.options
          - log4j2.properties
        tags: run_base

      - name: Change Hostname elasticsearch.yml
        command: sed -i "s/LOCALHOST/{{ ansible_hostname }}/g" /data/elasticsearch/config/elasticsearch.yml
        tags: run_base

      - name: Change Ip elasticsearch.yml
        command: sed -i "s/LOCALIP/{{ ansible_ens3.ipv4.address }}/g" /data/elasticsearch/config/elasticsearch.yml
        tags: run_base

      - name: Change CLUSTER-NAME CLUSTER-NAME
        command: sed -i "s/CLUSTER-NAME/{{ cluster_name }}/g" /data/elasticsearch/config/elasticsearch.yml
        tags: run_base

      - name: Change Discovery Ip List
        command: sed -i "s/DISCOVERY-IP-LIST/{{ discovery_ip }}/g" /data/elasticsearch/config/elasticsearch.yml
        tags: run_base

      - name: Change elasticsearch.yml (Master)
        command: sed -i "s/{{ item.key }}/{{ item.value }}/g" {{ item.filename }}
        with_items:
          - { key: 'NODE-MASTER', value: 'true', filename: '/data/elasticsearch/config/elasticsearch.yml' }
          - { key: 'NODE-DATA', value: 'false', filename: '/data/elasticsearch/config/elasticsearch.yml' }
          - { key: 'MEMORY-SIZE', value: '8g', filename: '/data/elasticsearch/config/jvm.options' }
        tags: change_conf_master

      - name: Change elasticsearch.yml (Search)
        command: sed -i "s/{{ item.key }}/{{ item.value }}/g" {{ item.filename }}
        with_items:
          - { key: 'NODE-MASTER', value: 'false', filename: '/data/elasticsearch/config/elasticsearch.yml'}
          - { key: 'NODE-DATA', value: 'false', filename: '/data/elasticsearch/config/elasticsearch.yml' }
          - { key: 'MEMORY-SIZE', value: '8g', filename: '/data/elasticsearch/config/jvm.options' }
        tags: change_conf_search

      - name: Change elasticsearch.yml (Data)
        command: sed -i "s/{{ item.key }}/{{ item.value }}/g" {{ item.filename }}
        with_items:
          - { key: 'NODE-MASTER', value: 'false', filename: '/data/elasticsearch/config/elasticsearch.yml' }
          - { key: 'NODE-DATA', value: 'true', filename: '/data/elasticsearch/config/elasticsearch.yml' }
          - { key: 'MEMORY-SIZE', value: '30g', filename: '/data/elasticsearch/config/jvm.options' }
        tags: change_conf_data

      - name: Docker Run Master & Search
        command:  docker run -it -d -p 9200:9200 -p 9300:9300 \
           -v /data/elasticsearch/config:/usr/share/elasticsearch/config \
           -v /data/elasticsearch/plugins:/usr/share/elasticsearch/plugins \
           -v /data/elasticsearch/logs:/usr/share/elasticsearch/logs \
           -v /data/elasticsearch/data:/usr/share/elasticsearch/data \
           --name es \
           --network host \
           --restart=always \
           --cap-add=IPC_LOCK --cap-add=SYS_PTRACE --ulimit memlock=-1:-1 --ulimit nofile=655360:655360 \
           elasticsearch:6.8.0
        tags: docker_run_master_search

      - name: Docker Run Data
        command:  docker run -it -d -p 9200:9200 -p 9300:9300 \
           -v /data/elasticsearch/config:/usr/share/elasticsearch/config \
           -v /data/elasticsearch/plugins:/usr/share/elasticsearch/plugins \
           -v /data/elasticsearch/logs:/usr/share/elasticsearch/logs \
           -v /data1/elasticsearch/data:/usr/share/elasticsearch/data \
           --name es \
           --network host \
           --restart=always \
           --cap-add=IPC_LOCK --cap-add=SYS_PTRACE --ulimit memlock=-1:-1 --ulimit nofile=655360:655360 \
           elasticsearch:6.8.0
        tags: docker_run_data

GrayLog

参数说明

tf_node_type --- 节点属性 true (manage) false (work)
http_external_uri --- 代理转发域名
es_http_list --- Es http 地址 (search node 即可)
mongodb_host --- mongodb host 地址

Service

# 初始化
ansible-playbook -C -s -e"host=xxxx" -u secret.sun -i hosts-file -t docker_pull,run_base gl_init.yml

# 安装
ansible-playbook -C -s -e"host=xxxx tf_node_type=false http_external_uri='[https://xxxx/](https://xxxx/)' es_http_list='[http://xxxx:9200,http://xxxx:9200,http://xxxx:9200](http://xxxx:9200,http://xxxx:9200,http://xxxx:9200)' mongodb_host='[mongodb://xxxx:27017,xxxx:27017,xxxx:27017/graylog?replicaSet=graylog'](mongodb://xxxx:27017,xxxx:27017,xxxx:27017/graylog?replicaSet=graylog')" -u secret.sun -i hosts-file -t run_change_conf gl_init.yml

# 启动
ansible-playbook -C -s -e"host=xxxx" -u secret.sun -i hosts-file -t docker_run gl_init.yml

PlayBook

# gl_init.yml
---
- hosts: "{{ host }}"
  tasks:
    - name: Docker Pull Graylog
      command: docker pull stag-reg.llsops.com/dba/graylog:3.0.2
      tags: docker_pull

    - name: Create GrayLog Dir
      file: path=/data/graylog/{{ item }} state=directory mode=0777
      with_items:
        - config
        - contentpacks
        - data
        - journal
        - log
        - logs
        - plugin
        - plugins
      tags: run_base

    # https://dev.maxmind.com/geoip/geoip2/geolite2/
    - name: Scp Free GeoLite2
      copy: src=plugin/graylog/{{ item.key }}/{{ item.value }} dest=/data/graylog/contentpacks/{{ item.value }} mode=0777 backup=no
      with_items:
        - { key: 'GeoLite2-ASN_20190604', value: 'GeoLite2-ASN.mmdb' }
        - { key: 'GeoLite2-City_20190604', value: 'GeoLite2-City.mmdb' }
        - { key: 'GeoLite2-Country_20190604', value: 'GeoLite2-Country.mmdb' }
      tags: run_base

    - name: Scp Plugin
      copy: src=plugin/graylog/{{ item }} dest=/data/graylog/plugin/{{ item }} backup=no
      with_items:
        - metrics-reporter-prometheus-1.5.0.jar
      tags: run_base

    - name: Scp Base Config
      copy: src=conf/graylog/{{ item }} dest=/data/graylog/config/{{ item }} mode=0777 backup=yes
      with_items:
        - graylog.conf
        - log4j2.xml
      tags: run_change_conf

    - name: Change graylog.conf
      command: sed -i "s/TF-NODE-TYPE/{{ tf_node_type }}/g" /data/graylog/config/graylog.conf
      tags: run_change_conf

    - name: Change graylog.conf elasticsearch_hosts
      command: sed -i "s+ES-HTTP-LIST+{{ es_http_list }}+g" /data/graylog/config/graylog.conf
      tags: run_change_conf

    - name: Change graylog.conf mongodb_uri
      command: sed -i "s+MONGODB-HOST+{{ mongodb_host }}+g" /data/graylog/config/graylog.conf
      tags: run_change_conf

    - name: Change graylog.conf http_external_uri
      command: sed -i "s+HTTP-EXTERNAL-URI+{{ http_external_uri }}+g" /data/graylog/config/graylog.conf
      tags: run_change_conf

    - name: Docker Run
      command:  docker run -it -p 9000:9000 \
        -e "GRAYLOG_SERVER_JAVA_OPTS=-Xms8g -Xmx8g" \
        -v /data/graylog/config:/usr/share/graylog/data/config \
        -v /data/graylog/contentpacks:/usr/share/graylog/data/contentpacks \
        -v /data/graylog/data:/usr/share/graylog/data/data \
        -v /data/graylog/journal:/usr/share/graylog/data/journal \
        -v /data/graylog/log:/usr/share/graylog/data/log \
        -v /data/graylog/plugin/:/usr/share/graylog/data/plugin \
        -h {{ ansible_hostname }} \
        --name gl \
        --network host \
        --restart always \
        --ulimit memlock=-1:-1 --ulimit nofile=655360:655360 \
        -d graylog:3.0.2
      tags: docker_run

架构图

Tips

搞日志的人都知道，大概率会发生日志不见了，基本上只要生产正常、kafka正常，肯定是用户不会查，这个基本上没救、无解；日志又多又长触发Es Bug 依然无解，这个东西不出问题没人看出了问题没有日志就是你的锅，哪怕费了老大的劲确认不是我们的问题，依然烦，各位保重...

GrayLog + ElasticSearch 容器化

相关组件

版本问题

目录说明

主机基础参数初始化

MongoDB 部署

ElasticSearch

GrayLog

Tips

相关文章

网友评论

延伸阅读

深度阅读

栏目导航

热点阅读