更新软件
sudo apt-get update && sudo apt-get upgrade
出现
perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_TIME = "zh_CN.UTF-8", ...... LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C").
sudo apt-get install language-pack-zh-hans
出现
AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message
sudo echo "ServerName localhost:80" >> /etc/apache2/apache2.conf
Apache禁止访问目录浏览
/etc/apache2/apache2.conf
<Directory /home/git/www/>
Options FollowSymLinks # 去掉 Indexes
AllowOverride None
Require all granted
</Directory>
Apache线程最大值（修改mpm）
/etc/apache2/mods-enabled/mpm_prefork.conf
修改至如下：
<IfModule mpm_prefork_module>
StartServers 100
MinSpareServers 100
MaxSpareServers 200
ServerLimit 300
MaxClients 300
MaxRequestsPerChild 10000
timeout 30
</IfModule>
http://blog.csdn.net/houdaiye/article/details/52057058
Apache开启cgi
-
/etc/apache2/sites-enabled/000-default.confInclude conf-available/serve-cgi-bin.conf #去掉注释 -
创建链接
ln -s /etc/apache2/mods-available/cgi.load /etc/apache2/mods-enaled -
开启模块
sudo a2enmod cgi && sudo service apache2 restart -
AddHandle
<IfDefine ENABLE_USR_LIB_CGI_BIN>
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
<Directory "/usr/lib/cgi-bin">
AllowOverride None
Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
Require all granted
AddHandler .cgi .pl .cgi-script
</Directory>
</IfDefine>
Apache更改目录
-
cgi-bin -->
/home/git/cgi-bin
/etc/apache2/conf-aviable/serve-cgi-bin.conf<IfDefine ENABLE_USR_LIB_CGI_BIN> #ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ ScriptAlias /cgi-bin/ /home/git/cgi-bin/ #<Directory "/usr/lib/cgi-bin"> <Directory "/home/git/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Require all granted AddHandler .cgi .pl .cgi-script </Directory> </IfDefine>
Apache自动部署项目
.git/hooks/post-update (chmod +x)
#!/bin/sh
unset GIT_DIR
wwwDir=/home/git/www
Dir=/home/git/www/jimeimei
if [ ! -d "${Dir}" ]
then
cd $wwwDir
git clone /home/git/repositories/jimeimei.git
chmod o+rx jimeimei
else
cd $Dir
git pull origin master
fi
cd $Dir
chmod o+rx -R ./*
chmod o-rx -R .git
- www -->
/home/git/www-
/etc/apache2/apache2.conf#<Directory /var/www/> <Directory /home/git/www/> #Options Indexes FollowSymLinks Options FollowSymLinks AllowOverride None Require all granted </Directory> -
/etc/apache2/sites-enabled/000-default.conf#DocumentRoot /var/www/html DocumentRoot /home/git/www
-
Ghost Blog
apache添加新端口，设置反向代理
-
/etc/apache2/site-aviable/8080.conf<VirtualHost *:8080> # The ServerName directive sets the request scheme, hostname and port that # the server uses to identify itself. This is used when creating # redirection URLs. In the context of virtual hosts, the ServerName # specifies what hostname must appear in the request's Host: header to # match this virtual host. For the default virtual host (this file) this # value is not decisive as it is used as a last resort host regardless. # However, you must set it for any further virtual host explicitly. #ServerName www.example.com ServerAdmin webmaster@localhost #DocumentRoot /var/www/html #DocumentRoot /home/git/www # Available loglevels: trace8, ..., trace1, debug, info, notice, warn, # error, crit, alert, emerg. # It is also possible to configure the loglevel for particular # modules, e.g. #LogLevel info ssl:warn ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined #blog proxy ProxyPreserveHost On ProxyPass / http://localhost:2368/ ProxyPassReverse / http://localhost:2368/ </VirtualHost> -
链接
ln -s /etc/apache2/sites-available/8080.conf /etc/apache2/sites-enabled/
jsoncpp
-
安装scons
- 下载gzip（http://www.scons.org/）
- 安装
tar zxvf scons-2..0.tar.gz && cd scons-2..0 && python setup.py install
-
用scons安装jsoncpp
- 进入到jsoncpp解压目录下，执行命令：
sudo scons platform=linux-gcc - 将
/jsoncpp-src-0.5.0/include/目录下的json文件夹拷贝到/usr/include/ - 将
jsoncpp-src-0.5.0/libs/linux-gcc-4.9.1/目录下的libjson_linux-gcc-4.9.1_libmt.a拷贝到/usr/local/lib/下，并为了方便使用，将其重命名为libjson.a
- 进入到jsoncpp解压目录下，执行命令：
-
编译：需指定链接库（刚才重命名后的那个文件）
g++ json.cpp -ljson
全局代理
https://jingsam.github.io/2016/05/08/setup-shadowsocks-http-proxy-on-ubuntu-server.html
swap设置
http://blog.itpub.net/17203031/viewspace-774174/
boost-regex
tar -xzvf boost_1_42_0.tar.gz
cd boost_1_42_0/libs/regex/build/
make -fgcc.mak
make -fgcc-shared.mak
sudo cp gcc/libboost_regex-gcc-1_42.a /usr/local/lib/libboost_regex.a
sudo cp gcc/libboost_regex-gcc-1_42.so /usr/local/lib/libboost_regex.so
sudo cp ../../../boost -r /usr/local/include/
htmlcxx
http://blog.chinaunix.net/uid-23062171-id-4411061.html
( ./configure && make && sudo make install)
http://www.cnblogs.com/Anker/p/3209876.html
libcurl
sudo apt-get install libcurl4-openssl-dev
libxls
./configure
make
sudo make install
sudo cp -r -v /usr/local/libxls/include/libxls/ /usr/include
sudo cp -r -v /usr/local/libxls/lib/ /usr
sudo cp -r -v /usr/local/libxls/include/xls.h /usr/include
http://www.jb51.net/article/61674.htm
http://www.tuicool.com/articles/JVnqUnE
http://www.cnblogs.com/yangxia-test/p/4195288.html
php7.ini在 /etc/php/7.0/apache2/php.ini
http://www.jianshu.com/p/5b80711f304f
设置jnuVPN
- 下载运行安装snx
- 运行snx，缺少什么模块就装上去，例如缺 libX11.so.6
apt install libx11-6:i386 libpam0g:i386 libstdc++5:i386 - snx以修改路由规则，只需改写
/etc/hosts文件，添加如下
202.116.0.224 jwxt.jnu.edu.cn - 设置定时任务
1.安装expectapt install tcl tk expect
常用软件
- apache2
- git-core
- php5
- mysql-server-5.6 (顺带mysql-client)
- php5-cgi
- php5-memcached
- phpmyadmin (
ln -s /usr/shar/phpmyadmin /WEB_ROOT/phpmyadmin) - gitolite
- nodejs
- npm
- node
- nodejs-legacy
网友评论