板子：itop4412-elite SCP 1GDDR
开发环境：Deepin 15.11 x64
移植过程以后再写，先把PATCH放出来：
SD卡启动
From 464159826634a9a23d3a35e4a2416f18a49657d7 Mon Sep 17 00:00:00 2001
From: "peter.hou" <kafka.hou@outlook.com>
Date: Sat, 17 Aug 2019 17:36:50 +0800
Subject: [PATCH 1/2] version : uboot2018.01-rc1 board : itop4412-elite SCP
1G bootmedia: sdcard
---
uboot2018.01/Makefile | 8 +-
uboot2018.01/arch/arm/dts/Makefile | 3 +-
uboot2018.01/arch/arm/dts/exynos4412-itop4412.dts | 161 ++++++
uboot2018.01/arch/arm/include/asm/mach-types.h | 1 +
uboot2018.01/arch/arm/mach-exynos/Kconfig | 5 +
uboot2018.01/arch/arm/mach-exynos/clock.c | 46 +-
.../arch/arm/mach-exynos/clock_init_exynos4.c | 557 ++++++++++++++++++-
.../arch/arm/mach-exynos/dmc_init_exynos4.c | 6 +-
.../arch/arm/mach-exynos/include/mach/power.h | 210 ++++++++
uboot2018.01/arch/arm/mach-exynos/itop4412_setup.h | 599 +++++++++++++++++++++
uboot2018.01/arch/arm/mach-exynos/lowlevel_init.c | 6 +
uboot2018.01/arch/arm/mach-exynos/power.c | 25 +
uboot2018.01/arch/arm/mach-exynos/spl_boot.c | 2 +
uboot2018.01/board/samsung/itop4412/Kconfig | 12 +
uboot2018.01/board/samsung/itop4412/MAINTAINERS | 6 +
uboot2018.01/board/samsung/itop4412/Makefile | 22 +
uboot2018.01/board/samsung/itop4412/itop4412.c | 38 ++
.../board/samsung/itop4412/tools/mkitop4412spl.c | 117 ++++
uboot2018.01/configs/itop4412_defconfig | 56 ++
uboot2018.01/include/configs/itop4412.h | 117 ++++
20 files changed, 1989 insertions(+), 8 deletions(-)
create mode 100644 uboot2018.01/arch/arm/dts/exynos4412-itop4412.dts
create mode 100644 uboot2018.01/arch/arm/mach-exynos/itop4412_setup.h
create mode 100644 uboot2018.01/board/samsung/itop4412/Kconfig
create mode 100644 uboot2018.01/board/samsung/itop4412/MAINTAINERS
create mode 100644 uboot2018.01/board/samsung/itop4412/Makefile
create mode 100644 uboot2018.01/board/samsung/itop4412/itop4412.c
create mode 100644 uboot2018.01/board/samsung/itop4412/tools/mkitop4412spl.c
create mode 100644 uboot2018.01/configs/itop4412_defconfig
create mode 100644 uboot2018.01/include/configs/itop4412.h
diff --git a/uboot2018.01/Makefile b/uboot2018.01/Makefile
index e6d309a..c42548d 100644
--- a/uboot2018.01/Makefile
+++ b/uboot2018.01/Makefile
@@ -246,6 +246,8 @@ ifeq ($(HOSTARCH),$(ARCH))
CROSS_COMPILE ?=
endif
+CROSS_COMPILE := arm-linux-gnueabihf-
+
KCONFIG_CONFIG ?= .config
export KCONFIG_CONFIG
@@ -852,9 +854,9 @@ cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
cfg: u-boot.cfg
-quiet_cmd_cfgcheck = CFGCHK $2
-cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
- $(srctree)/scripts/config_whitelist.txt $(srctree)
+#quiet_cmd_cfgcheck = CFGCHK $2
+#cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
+# $(srctree)/scripts/config_whitelist.txt $(srctree)
all: $(ALL-y) cfg
ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
diff --git a/uboot2018.01/arch/arm/dts/Makefile b/uboot2018.01/arch/arm/dts/Makefile
index ed85349..b7e80d7 100644
--- a/uboot2018.01/arch/arm/dts/Makefile
+++ b/uboot2018.01/arch/arm/dts/Makefile
@@ -14,7 +14,8 @@ dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \
exynos4210-universal_c210.dtb \
exynos4210-trats.dtb \
exynos4412-trats2.dtb \
- exynos4412-odroid.dtb
+ exynos4412-odroid.dtb \
+ exynos4412-itop4412.dtb
dtb-$(CONFIG_TARGET_HIKEY) += hi6220-hikey.dtb
diff --git a/uboot2018.01/arch/arm/dts/exynos4412-itop4412.dts b/uboot2018.01/arch/arm/dts/exynos4412-itop4412.dts
new file mode 100644
index 0000000..78cfd2f
--- /dev/null
+++ b/uboot2018.01/arch/arm/dts/exynos4412-itop4412.dts
@@ -0,0 +1,161 @@
+/*
+ * Odroid-U3/X2 board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+
+/ {
+ model = "itop-4412 based on Exynos4412";
+ compatible = "samsung,itop-4412", "samsung,exynos4412";
+
+ aliases {
+ i2c0 = "/i2c@13860000";
+ i2c1 = "/i2c@13870000";
+ i2c2 = "/i2c@13880000";
+ i2c3 = "/i2c@13890000";
+ i2c4 = "/i2c@138a0000";
+ i2c5 = "/i2c@138b0000";
+ i2c6 = "/i2c@138c0000";
+ i2c7 = "/i2c@138d0000";
+ serial0 = "/serial@13820000";
+ console = "/serial@13820000";
+ mmc2 = "sdhci@12530000";
+ mmc4 = "dwmmc@12550000";
+ };
+
+ fimd@11c00000 {
+ compatible = "samsung,exynos-fimd";
+ reg = <0x11c00000 0xa4>;
+
+ samsung,vl-freq = <60>;
+ samsung,vl-col = <480>;
+ samsung,vl-row = <272>;
+ samsung,vl-width = <480>;
+ samsung,vl-height = <272>;
+
+ samsung,vl-clkp = <0>;
+ samsung,vl-oep = <0>;
+ samsung,vl-hsp = <1>;
+ samsung,vl-vsp = <0>;
+ samsung,vl-dp = <1>;
+ samsung,vl-bpix = <4>;
+
+ samsung,vl-hspw = <32>;
+ samsung,vl-hbpd = <80>;
+ samsung,vl-hfpd = <48>;
+ samsung,vl-vspw = <2>;
+ samsung,vl-vbpd = <1>;
+ samsung,vl-vfpd = <13>;
+ samsung,vl-cmd-allow-len = <0xf>;
+
+ samsung,winid = <0>;
+ samsung,power-on-delay = <30>;
+ samsung,interface-mode = <1>;
+ samsung,mipi-enabled = <0>;
+ //samsung,dp-enabled;
+ //samsung,dual-lcd-enabled;
+
+ samsung,logo-on = <1>;
+ samsung,resolution = <0>;
+ samsung,rgb-mode = <1>;
+ samsung,pwm-out-gpio = <&gpd0 1 1>;
+ samsung,bl-en-gpio = <&gpd0 0 1>;
+ };
+
+ mipidsi@11c80000 {
+ compatible = "samsung,exynos-mipi-dsi";
+ reg = <0x11c80000 0x5c>;
+
+ samsung,dsim-config-e-interface = <1>;
+ samsung,dsim-config-e-virtual-ch = <0>;
+ samsung,dsim-config-e-pixel-format = <7>;
+ samsung,dsim-config-e-burst-mode = <1>;
+ samsung,dsim-config-e-no-data-lane = <3>;
+ samsung,dsim-config-e-byte-clk = <0>;
+ samsung,dsim-config-hfp = <1>;
+
+ samsung,dsim-config-p = <3>;
+ samsung,dsim-config-m = <120>;
+ samsung,dsim-config-s = <1>;
+
+ samsung,dsim-config-pll-stable-time = <500>;
+ samsung,dsim-config-esc-clk = <20000000>;
+ samsung,dsim-config-stop-holding-cnt = <0x7ff>;
+ samsung,dsim-config-bta-timeout = <0xff>;
+ samsung,dsim-config-rx-timeout = <0xffff>;
+
+ samsung,dsim-device-id = <0xffffffff>;
+ samsung,dsim-device-bus-id = <0>;
+
+ samsung,dsim-device-reverse-panel = <1>;
+ };
+
+ i2c@13860000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <100000>;
+ status = "okay";
+
+ max77686_pmic@09 {
+ compatible = "maxim,max77686_pmic";
+ interrupts = <7 0>;
+ reg = <0x09 0 0>;
+ #clock-cells = <1>;
+ };
+ };
+
+ serial@13820000 {
+ status = "okay";
+ };
+
+ sdhci@12510000 {
+ status = "disabled";
+ };
+
+ sdhci@12520000 {
+ status = "disabled";
+ };
+
+ sdhci@12530000 {
+ samsung,bus-width = <4>;
+ /*samsung,timing = <1 2 3>;*/
+ /*cd-gpios = <&gpk2 2 0>;*/
+ status = "okay";
+ };
+
+ sdhci@12540000 {
+ status = "disabled";
+ };
+
+ dwmmc@12550000 {
+ samsung,bus-width = <4>;
+ samsung,timing = <2 1 0>;
+ samsung,removable = <0>;
+ fifoth_val = <0x203f0040>;
+ bus_hz = <400000000>;
+ div = <0x3>;
+ index = <4>;
+ };
+
+ ehci@12580000 {
+ compatible = "samsung,exynos-ehci";
+ reg = <0x12580000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ phy {
+ compatible = "samsung,exynos-usb-phy";
+ reg = <0x125B0000 0x100>;
+ };
+ };
+
+ emmc-reset {
+ compatible = "samsung,emmc-reset";
+ reset-gpio = <&gpk1 2 0>;
+ };
+};
\ No newline at end of file
diff --git a/uboot2018.01/arch/arm/include/asm/mach-types.h b/uboot2018.01/arch/arm/include/asm/mach-types.h
index 9f82efe..e19b24b 100644
--- a/uboot2018.01/arch/arm/include/asm/mach-types.h
+++ b/uboot2018.01/arch/arm/include/asm/mach-types.h
@@ -5057,4 +5057,5 @@
#define MACH_TYPE_NASM25 5112
#define MACH_TYPE_TOMATO 5113
#define MACH_TYPE_OMAP3_MRC3D 5114
+#define MACH_TYPE_ITOP4412 5115
#endif
diff --git a/uboot2018.01/arch/arm/mach-exynos/Kconfig b/uboot2018.01/arch/arm/mach-exynos/Kconfig
index 5ac047d..abe71e8 100644
--- a/uboot2018.01/arch/arm/mach-exynos/Kconfig
+++ b/uboot2018.01/arch/arm/mach-exynos/Kconfig
@@ -60,6 +60,10 @@ config TARGET_ORIGEN
bool "Exynos4412 Origen board"
select SUPPORT_SPL
+config TARGET_ITOP4412
+ bool "Exynos4412 itop4412 board"
+ select SUPPORT_SPL
+
config TARGET_TRATS2
bool "Exynos4412 Trat2 board"
@@ -156,6 +160,7 @@ source "board/samsung/smdkv310/Kconfig"
source "board/samsung/trats/Kconfig"
source "board/samsung/universal_c210/Kconfig"
source "board/samsung/origen/Kconfig"
+source "board/samsung/itop4412/Kconfig"
source "board/samsung/trats2/Kconfig"
source "board/samsung/odroid/Kconfig"
source "board/samsung/arndale/Kconfig"
diff --git a/uboot2018.01/arch/arm/mach-exynos/clock.c b/uboot2018.01/arch/arm/mach-exynos/clock.c
index 3d31f9d..f3f81af 100644
--- a/uboot2018.01/arch/arm/mach-exynos/clock.c
+++ b/uboot2018.01/arch/arm/mach-exynos/clock.c
@@ -783,8 +783,14 @@ static unsigned long exynos4x12_get_uart_clk(int dev_index)
static unsigned long exynos4_get_mmc_clk(int dev_index)
{
+#ifndef CONFIG_ITOP4412
struct exynos4_clock *clk =
(struct exynos4_clock *)samsung_get_base_clock();
+#else
+ struct exynos4x12_clock *clk =
+ (struct exynos4x12_clock *)samsung_get_base_clock();
+#endif
+
unsigned long uclk, sclk;
unsigned int sel, ratio, pre_ratio;
int shift = 0;
@@ -833,8 +839,14 @@ static unsigned long exynos4_get_mmc_clk(int dev_index)
/* exynos4: set the mmc clock */
static void exynos4_set_mmc_clk(int dev_index, unsigned int div)
{
+#ifndef CONFIG_ITOP4412
struct exynos4_clock *clk =
(struct exynos4_clock *)samsung_get_base_clock();
+#else
+ struct exynos4x12_clock *clk =
+ (struct exynos4x12_clock *)samsung_get_base_clock();
+#endif
+
unsigned int addr, clear_bit, set_bit;
/*
@@ -912,8 +924,13 @@ static void exynos5420_set_mmc_clk(int dev_index, unsigned int div)
/* get_lcd_clk: return lcd clock frequency */
static unsigned long exynos4_get_lcd_clk(void)
{
+#ifndef CONFIG_ITOP4412
struct exynos4_clock *clk =
(struct exynos4_clock *)samsung_get_base_clock();
+#else
+ struct exynos4x12_clock *clk =
+ (struct exynos4x12_clock *)samsung_get_base_clock();
+#endif
unsigned long pclk, sclk;
unsigned int sel;
unsigned int ratio;
@@ -922,7 +939,11 @@ static unsigned long exynos4_get_lcd_clk(void)
* CLK_SRC_LCD0
* FIMD0_SEL [3:0]
*/
+#ifndef CONFIG_ITOP4412
sel = readl(&clk->src_lcd0);
+#else
+ sel = readl(&clk->src_lcd);
+#endif
sel = sel & 0xf;
/*
@@ -943,7 +964,11 @@ static unsigned long exynos4_get_lcd_clk(void)
* CLK_DIV_LCD0
* FIMD0_RATIO [3:0]
*/
+#ifndef CONFIG_ITOP4412
ratio = readl(&clk->div_lcd0);
+#else
+ ratio = readl(&clk->div_lcd);
+#endif
ratio = ratio & 0xf;
pclk = sclk / (ratio + 1);
@@ -1063,8 +1088,13 @@ static unsigned long exynos5800_get_lcd_clk(void)
void exynos4_set_lcd_clk(void)
{
+#ifndef CONFIG_ITOP4412
struct exynos4_clock *clk =
- (struct exynos4_clock *)samsung_get_base_clock();
+ (struct exynos4_clock *)samsung_get_base_clock();
+#else
+ struct exynos4x12_clock *clk =
+ (struct exynos4x12_clock *)samsung_get_base_clock();
+#endif
/*
* CLK_GATE_BLOCK
@@ -1086,7 +1116,11 @@ void exynos4_set_lcd_clk(void)
* MIPI0_SEL [12:15]
* set lcd0 src clock 0x6: SCLK_MPLL
*/
+#ifndef CONFIG_ITOP4412
clrsetbits_le32(&clk->src_lcd0, 0xf, 0x6);
+#else
+ clrsetbits_le32(&clk->src_lcd, 0xf, 0x6);
+#endif
/*
* CLK_GATE_IP_LCD0
@@ -1098,8 +1132,11 @@ void exynos4_set_lcd_clk(void)
* CLK_PPMULCD0 [5]
* Gating all clocks for FIMD0
*/
+#ifndef CONFIG_ITOP4412
setbits_le32(&clk->gate_ip_lcd0, 1 << 0);
-
+#else
+ setbits_le32(&clk->gate_ip_lcd, 1 << 0);
+#endif
/*
* CLK_DIV_LCD0
* FIMD0_RATIO [3:0]
@@ -1110,7 +1147,12 @@ void exynos4_set_lcd_clk(void)
* MIPI0_PRE_RATIO [23:20]
* set fimd ratio
*/
+#ifndef CONFIG_ITOP4412
clrsetbits_le32(&clk->div_lcd0, 0xf, 0x1);
+#else
+ clrsetbits_le32(&clk->div_lcd, 0xf, 0x1);
+#endif
+
}
void exynos5_set_lcd_clk(void)
diff --git a/uboot2018.01/arch/arm/mach-exynos/clock_init_exynos4.c b/uboot2018.01/arch/arm/mach-exynos/clock_init_exynos4.c
index 584e4ba..8dea627 100644
--- a/uboot2018.01/arch/arm/mach-exynos/clock_init_exynos4.c
+++ b/uboot2018.01/arch/arm/mach-exynos/clock_init_exynos4.c
@@ -30,12 +30,17 @@
#include <asm/arch/clk.h>
#include <asm/arch/clock.h>
#include "common_setup.h"
+#ifndef CONFIG_ITOP4412
#include "exynos4_setup.h"
-
+#else
+#include "itop4412_setup.h"
+#endif
/*
* system_clock_init: Initialize core clock and bus clock.
* void system_clock_init(void)
*/
+#ifndef CONFIG_ITOP4412
+
void system_clock_init(void)
{
struct exynos4_clock *clk =
@@ -92,3 +97,553 @@ void system_clock_init(void)
sdelay(0x30000);
}
+
+#else
+
+/**
+ * freq (ARMCLK) = 1400 MHz at 1.3 V
+ * freq (ACLK_COREM0) = 350 MHz at 1.3V
+ * freq (ACLK_COREM1) = 188 MHz at 1.3 V
+ * freq (PERIPHCLK) = 1400 MHz at 1.3 V
+ * freq (ATCLK) = 214 MHz at 1.3 V
+ * freq (PCLK_DBG) = 107 MHz at 1.3 V
+ * freq (SCLK_DMC) = 400 MHz at 1.0 V
+ * freq (ACLK_DMCD) = 200 MHz at 1.0 V
+ * freq (ACLK_DMCP) = 100 MHz at 1.0 V
+ * freq (ACLK_ACP) = 200 MHz at 1.0 V
+ * freq (PCLK_ACP) = 100 MHz at 1.0 V
+ * freq (SCLK_C2C) = 400 MHz at 1.0 V
+ * freq (ACLK_C2C) = 200 MHz at 1.0 V
+ * freq (ACLK_GDL) = 200 MHz at 1.0 V
+ * freq (ACLK_GPL) = 100 MHz at 1.0 V
+ * freq (ACLK_GDR) = 200 MHz at 1.0 V
+ * freq (ACLK_GPR) = 100 MHz at 1.0 V
+ * freq (ACLK_400_MCUISP) = 400 MHz at 1.0 V
+ * freq (ACLK_200) = 160 MHz at 1.0 V
+ * freq (ACLK_100) = 100 MHz at 1.0 V
+ * freq (ACLK_160) = 160 MHz at 1.0 V
+ * freq (ACLK_133) = 133 MHz at 1.0 V
+ * freq (SCLK_ONENAND) = 160 MHz at 1.0 V
+ */
+void system_clock_init(void)
+{
+ unsigned int set, clr, clr_src_cpu, clr_pll_con0, clr_src_dmc;
+ struct exynos4x12_clock *clk = (struct exynos4x12_clock *)
+ samsung_get_base_clock();
+
+/************************************************************
+ * Step 1:
+ *
+ * Set PDIV, MDIV, and SDIV values (Refer to (A, M, E, V)
+ * Change other PLL control values
+ ************************************************************/
+
+ /**
+ * Set dividers for MOUTcore = 1000 MHz
+ *
+ * DOUTcore = MOUTcore / (CORE_RATIO +1) = 1000 MHz (0)
+ * ACLK_COREM0 = ARMCLK / (COREM0_RATIO +1) = 250 MHz (3)
+ * ACLK_COREM1 = ARMCLK / (COREM1_RATIO +1) = 125 MHz (7)
+ * PERIPHCLK = DOUTcore / (PERIPH_RATIO + 1) = 1000 MHz (0)
+ * ATCLK = MOUTcore / (ATB_RATIO + 1) = 200 MHz (4)
+ * PCLK_DBG = ATCLK / (PCLK_DBG_RATIO + 1) = 100 MHz (1)
+ * SCLKapll = MOUTapll / (APLL_RATIO + 1) = 500 MHz (1)
+ * ARMCLK = DOUTcore / (CORE2_RATIO + 1) = 1000 MHz (0)
+ */
+
+ /** CLK_DIV_CPU0 */
+ clr = CORE_RATIO(7) | COREM0_RATIO(7) | COREM1_RATIO(7) |
+ PERIPH_RATIO(7) | ATB_RATIO(7) | PCLK_DBG_RATIO(7) |
+ APLL_RATIO(7) | CORE2_RATIO(7);
+ set = CORE_RATIO(0) | COREM0_RATIO(3) | COREM1_RATIO(7) |
+ PERIPH_RATIO(0) | ATB_RATIO(4) | PCLK_DBG_RATIO(1) |
+ APLL_RATIO(1) | CORE2_RATIO(0);
+
+ clrsetbits_le32(&clk->div_cpu0, clr, set);
+
+ /* Wait for divider ready status */
+ while (readl(&clk->div_stat_cpu0) & DIV_STAT_CPU0_CHANGING)
+ continue;
+
+ /**
+ * Set dividers for MOUThpm = 1000 MHz (MOUTapll)
+ *
+ * DOUTcopy = MOUThpm / (COPY_RATIO + 1) = 200 MHz (4)
+ * SCLK_HPM = DOUTcopy / (HPM_RATIO + 1) = 200 MHz (0)
+ * ACLK_CORES = ARMCLK / (CORES_RATIO + 1) = 1000 MHz (0)
+ */
+
+ /** CLK_DIV_CPU1 */
+ clr = COPY_RATIO(7) | HPM_RATIO(7) | CORES_RATIO(7);
+ set = COPY_RATIO(4) | HPM_RATIO(0) | CORES_RATIO(0);
+
+ clrsetbits_le32(&clk->div_cpu1, clr, set);
+
+ /* Wait for divider ready status */
+ while (readl(&clk->div_stat_cpu1) & DIV_STAT_CPU1_CHANGING)
+ continue;
+
+ /**
+ * Set dividers for -->
+ * MOUTdmc = 800 MHz
+ * MOUTdphy = 800 MHz
+ *
+ * ACLK_ACP = MOUTdmc / (ACP_RATIO + 1) = 200 MHz (3)
+ * PCLK_ACP = ACLK_ACP / (ACP_PCLK_RATIO + 1) = 100 MHz (1)
+ * SCLK_DPHY = MOUTdphy / (DPHY_RATIO + 1) = 400 MHz (1)
+ * SCLK_DMC = MOUTdmc / (DMC_RATIO + 1) = 400 MHz (1)
+ * ACLK_DMCD = SCLK_DMC / (DMCD_RATIO + 1) = 200 MHz (1)
+ * ACLK_DMCP = ACLK_DMCD / (DMCP_RATIO + 1) = 100 MHz (1)
+ */
+
+ /** CLK_DIV_DMC0 */
+ clr = ACP_RATIO(7) | ACP_PCLK_RATIO(7) | DPHY_RATIO(7) |
+ DMC_RATIO(7) | DMCD_RATIO(7) | DMCP_RATIO(7);
+ set = ACP_RATIO(3) | ACP_PCLK_RATIO(1) | DPHY_RATIO(1) |
+ DMC_RATIO(1) | DMCD_RATIO(1) | DMCP_RATIO(1);
+
+ clrsetbits_le32(&clk->div_dmc0, clr, set);
+
+ /* Wait for divider ready status */
+ while (readl(&clk->div_stat_dmc0) & DIV_STAT_DMC0_CHANGING)
+ continue;
+
+ /**
+ * For:
+ * MOUTg2d = 800 MHz
+ * MOUTc2c = 800 Mhz
+ * MOUTpwi = 24 MHz
+ *
+ * SCLK_G2D_ACP = MOUTg2d / (G2D_ACP_RATIO + 1) = 200 MHz (3)
+ * SCLK_C2C = MOUTc2c / (C2C_RATIO + 1) = 400 MHz (1)
+ * SCLK_PWI = MOUTpwi / (PWI_RATIO + 1) = 24 MHz (0)
+ * ACLK_C2C = SCLK_C2C / (C2C_ACLK_RATIO + 1) = 200 MHz (1)
+ * DVSEM_RATIO : It decides frequency for PWM frame time slot in DVS emulation mode.
+ * DPM_RATIO : It decides frequency of DPM channel clock.
+ */
+
+ /** CLK_DIV_DMC1 */
+ clr = G2D_ACP_RATIO(15) | C2C_RATIO(7) | PWI_RATIO(15) |
+ C2C_ACLK_RATIO(7) | DVSEM_RATIO(127) | DPM_RATIO(127);
+ set = G2D_ACP_RATIO(3) | C2C_RATIO(1) | PWI_RATIO(0) |
+ C2C_ACLK_RATIO(1) | DVSEM_RATIO(1) | DPM_RATIO(1);
+
+ clrsetbits_le32(&clk->div_dmc1, clr, set);
+
+ /* Wait for divider ready status */
+ while (readl(&clk->div_stat_dmc1) & DIV_STAT_DMC1_CHANGING)
+ continue;
+
+ /**
+ * MOUTmpll = 800 MHz
+ * MOUTvpll = 54 MHz
+ *
+ * ACLK_200 = MOUTACLK_200 / (ACLK_200_RATIO + 1) = 200 MHz (3)
+ * ACLK_100 = MOUTACLK_100 / (ACLK_100_RATIO + 1) = 100 MHz (7)
+ * ACLK_160 = MOUTACLK_160 / (ACLK_160_RATIO + 1) = 160 MHz (4)
+ * ACLK_133 = MOUTACLK_133 / (ACLK_133_RATIO + 1) = 133 MHz (5)
+ * ONENAND = MOUTONENAND_1 / (ONENAND_RATIO + 1) = 160 MHz (0)
+ * ACLK_266_GPS = MOUTACLK_266_GPS / (ACLK_266_GPS_RATIO + 1) = 266 MHz (2)
+ * ACLK_400_MCUISP = MOUTACLK_400_MCUISP / (ACLK_400_MCUISP_RATIO + 1) = 400 MHz (1)
+ */
+
+ /** CLK_DIV_TOP */
+ clr = ACLK_200_RATIO(7) | ACLK_100_RATIO(15) | ACLK_160_RATIO(7) |
+ ACLK_133_RATIO(7) | ONENAND_RATIO(7) | ACLK_266_GPS_RATIO(7) | ACLK_400_MCUISP_RATIO(7);
+ set = ACLK_200_RATIO(3) | ACLK_100_RATIO(7) | ACLK_160_RATIO(4) |
+ ACLK_133_RATIO(5) | ONENAND_RATIO(0) | ACLK_266_GPS_RATIO(2) | ACLK_400_MCUISP_RATIO(1);
+
+ clrsetbits_le32(&clk->div_top, clr, set);
+
+ /* Wait for divider ready status */
+ while (readl(&clk->div_stat_top) & DIV_STAT_TOP_CHANGING)
+ continue;
+
+ /**
+ * ACLK_GDL = MOUTGDL / (GDL_RATIO + 1) = 200 MHz (3)
+ * ACLK_GPL = MOUTGPL / (GPL_RATIO + 1) = 100 MHz (1)
+ */
+
+ /** CLK_DIV_LEFTBUS */
+ clr = GDL_RATIO(7) | GPL_RATIO(7);
+ set = GDL_RATIO(3) | GPL_RATIO(1);
+
+ clrsetbits_le32(&clk->div_leftbus, clr, set);
+
+ /* Wait for divider ready status */
+ while (readl(&clk->div_stat_leftbus) & DIV_STAT_LEFTBUS_CHANGING)
+ continue;
+
+ /**
+ * ACLK_GDR = MOUTGDR / (GDR_RATIO + 1) = 200 MHz (3)
+ * ACLK_GPR = MOUTGPR / (GPR_RATIO + 1) = 100 MHz (1)
+ */
+
+ /** CLK_DIV_RIGHTBUS */
+ clr = GPR_RATIO(7) | GDR_RATIO(7);
+ set = GPR_RATIO(3) | GDR_RATIO(1);
+
+ clrsetbits_le32(&clk->div_rightbus, clr, set);
+
+ /* Wait for divider ready status */
+ while (readl(&clk->div_stat_rightbus) & DIV_STAT_RIGHTBUS_CHANGING)
+ continue;
+
+ /**
+ * MOUTUART[1-4] = 800 Mhz (MPLL)
+ *
+ * SCLK_UART0 = MOUTUART0 / (UART0_RATIO + 1) = 100 MHz (7)
+ * SCLK_UART1 = MOUTUART1 / (UART1_RATIO + 1) = 100 MHz (7)
+ * SCLK_UART2 = MOUTUART2 / (UART2_RATIO + 1) = 100 MHz (7)
+ * SCLK_UART3 = MOUTUART3 / (UART3_RATIO + 1) = 100 MHz (7)
+ * SCLK_UART4 = MOUTUART4 / (UART4_RATIO + 1) = 100 MHz (7)
+ */
+ /** CLK_DIV_PERIL0 */
+ clr = UART0_RATIO(15) | UART1_RATIO(15) | UART2_RATIO(15) |
+ UART3_RATIO(15) | UART4_RATIO(15);
+ set = UART0_RATIO(7) | UART1_RATIO(7) | UART2_RATIO(7) |
+ UART3_RATIO(7) | UART4_RATIO(7);
+
+ clrsetbits_le32(&clk->div_peril0, clr, set);
+
+ /* Wait for divider ready status */
+ while (readl(&clk->div_stat_peril0) & DIV_STAT_PERIL0_CHANGING)
+ continue;
+ /**
+ * For MOUTMMC0-3 = 800 MHz (MPLL)
+ *
+ * SCLK_MIPIHSI = MOUTMIPIHSI / (MIPIHSI_RATIO + 1) = 200 MHz (3)
+ */
+ /* CLK_DIV_FSYS0 */
+ clr = MIPIHSI_RATIO(15);
+ set = MIPIHSI_RATIO(3);
+
+ clrsetbits_le32(&clk->div_fsys0, clr, set);
+
+ /* Wait for divider ready status */
+ while (readl(&clk->div_stat_fsys0) & DIV_STAT_FSYS0_CHANGING)
+ continue;
+
+ /**
+ * For MOUTMMC0-3 = 800 MHz (MPLL)
+ *
+ * DOUTMMC0 = MOUTMMC0 / (MMC0_RATIO + 1) = 100 MHz (7)
+ * SCLK_MMC0 = DOUTMMC0 / (MMC0_PRE_RATIO + 1) = 50 MHz (1)
+ * DOUTMMC1 = MOUTMMC1 / (MMC1_RATIO + 1) = 100 MHz (7)
+ * SCLK_MMC1 = DOUTMMC1 / (MMC1_PRE_RATIO + 1) = 50 MHz (1)
+ */
+ /* CLK_DIV_FSYS1 */
+ clr = MMC0_RATIO(15) | MMC0_PRE_RATIO(255) | MMC1_RATIO(15) |
+ MMC1_PRE_RATIO(255);
+
+ set = MMC0_RATIO(7) | MMC0_PRE_RATIO(1) | MMC1_RATIO(7) |
+ MMC1_PRE_RATIO(1);
+
+ clrsetbits_le32(&clk->div_fsys1, clr, set);
+
+ /* Wait for divider ready status */
+ while (readl(&clk->div_stat_fsys1) & DIV_STAT_FSYS1_CHANGING)
+ continue;
+
+ /**
+ * For MOUTmmc0-3 = 800 MHz (MPLL)
+ *
+ * DOUTmmc3 = MOUTmmc3 / (MMC2_RATIO + 1) = 100 MHz (7)
+ * sclk_mmc3 = DOUTmmc3 / (MMC2_PRE_RATIO + 1) = 50 MHz (1)
+ * DOUTmmc2 = MOUTmmc2 / (MMC3_RATIO + 1) = 100 MHz (7)
+ * sclk_mmc2 = DOUTmmc2 / (MMC3_PRE_RATIO + 1) = 50 MHz (1)
+ */
+ /* CLK_DIV_FSYS2 */
+ clr = MMC2_RATIO(15) | MMC2_PRE_RATIO(255) | MMC3_RATIO(15) |
+ MMC3_PRE_RATIO(255);
+ set = MMC2_RATIO(7) | MMC2_PRE_RATIO(1) | MMC3_RATIO(7) |
+ MMC3_PRE_RATIO(1);
+
+ clrsetbits_le32(&clk->div_fsys2, clr, set);
+
+ /* Wait for divider ready status */
+ while (readl(&clk->div_stat_fsys2) & DIV_STAT_FSYS2_CHANGING)
+ continue;
+
+ /**
+ * For MOUTmmc4 = 800 MHz (MPLL)
+ *
+ * DOUTmmc4 = MOUTmmc4 / (MMC4_RATIO + 1) = 100 MHz (7)
+ * sclk_mmc4 = DOUTmmc4 / (MMC4_PRE_RATIO + 1) = 100 MHz (0)
+ */
+ /* CLK_DIV_FSYS3 */
+ clr = MMC4_RATIO(15) | MMC4_PRE_RATIO(255);
+ set = MMC4_RATIO(7) | MMC4_PRE_RATIO(0);
+
+ clrsetbits_le32(&clk->div_fsys3, clr, set);
+
+ /* Wait for divider ready status */
+ while (readl(&clk->div_stat_fsys3) & DIV_STAT_FSYS3_CHANGING)
+ continue;
+
+/************************************************************
+ * Step 2:
+ *
+ * Set K, AFC, MRR, MFR values if necessary
+ * (Refer to (A, M, E, V)PLL_CON1 SFRs)
+ * Turn on a PLL (Refer to (A, M, E, V) PLL_CON0 SFRs)
+ ************************************************************/
+
+ /* Set APLL to 1000MHz */
+ /** APLL_CON1 */
+ clr = AFC(31) | LOCK_CON_DLY(31) | LOCK_CON_IN(3) |
+ LOCK_CON_OUT(3) |FEED_EN(1)| AFC_ENB(1) |
+ DCC_ENB(1) | BYPASS(1) |RESV0(1) | RESV1(1);
+ set = AFC(0) | LOCK_CON_DLY(8) | LOCK_CON_IN(3) |
+ LOCK_CON_OUT(0) |FEED_EN(0)| AFC_ENB(0) |
+ DCC_ENB(1) | BYPASS(0) |RESV0(0) | RESV1(0);
+
+ clrsetbits_le32(&clk->apll_con1, clr, set);
+
+ /** APLL_CON0 */
+ clr_pll_con0 = SDIV(7) | PDIV(63) | MDIV(1023) | FSEL(1) | PLL_ENABLE(1);
+ set = SDIV(0) | PDIV(3) | MDIV(125) | FSEL(0) | PLL_ENABLE(1);
+
+ clrsetbits_le32(&clk->apll_con0, clr_pll_con0, set);
+
+ /* Wait for PLL to be locked */
+ while (!(readl(&clk->apll_con0) & PLL_LOCKED_BIT))
+ continue;
+
+ /* Set MPLL to 800MHz */
+ /** MPLL_CON1 */
+ clr = AFC(31) | LOCK_CON_DLY(31) | LOCK_CON_IN(3) |
+ LOCK_CON_OUT(3) |FEED_EN(1)| AFC_ENB(1) |
+ DCC_ENB(1) | BYPASS(1) |RESV0(1) | RESV1(1);
+ set = AFC(0) | LOCK_CON_DLY(8) | LOCK_CON_IN(3) |
+ LOCK_CON_OUT(0) |FEED_EN(0)| AFC_ENB(0) |
+ DCC_ENB(1) | BYPASS(0) |RESV0(0) | RESV1(0);
+
+ clrsetbits_le32(&clk->mpll_con1, clr, set);
+
+ /** MPLL_CON0 */
+ clr_pll_con0 = SDIV(7) | PDIV(63) | MDIV(1023) | FSEL(1) | PLL_ENABLE(1);
+ set = SDIV(0) | PDIV(3) | MDIV(100) | FSEL(0) | PLL_ENABLE(1);
+
+ clrsetbits_le32(&clk->mpll_con0, clr_pll_con0, set);
+
+ /* Wait for PLL to be locked */
+ while (!(readl(&clk->mpll_con0) & PLL_LOCKED_BIT))
+ continue;
+
+ /* Set EPLL to 192MHz */
+ /** EPLL_CON2 */
+ clr = ICP_BOOST(7) | EV_FSEL(1) | FVCO_EN(1) | EV_BYPASS(1) |
+ SSCG_EN(1) | EV_AFC_ENB(1) | EV_DCC_ENB(1) | EXTAFC(1);
+ set = ICP_BOOST(0) | EV_FSEL(1) | FVCO_EN(1) | EV_BYPASS(1) |
+ SSCG_EN(0) | EV_AFC_ENB(0) | EV_DCC_ENB(1) | EXTAFC(0);
+
+ clrsetbits_le32(&clk->epll_con2, clr, set);
+
+ /** EPLL_CON1 */
+ /* there is null */
+
+ /** EPLL_CON0 */
+ clr_pll_con0 = SDIV(7) | PDIV(63) | MDIV(1023) | FSEL(1) | PLL_ENABLE(1);
+ set = SDIV(2) | PDIV(2) | MDIV(64) | FSEL(0) | PLL_ENABLE(1);
+
+ clrsetbits_le32(&clk->epll_con0, clr_pll_con0, set);
+
+ /* Wait for PLL to be locked */
+ while (!(readl(&clk->epll_con0) & PLL_LOCKED_BIT))
+ continue;
+
+ /* Set VPLL to 54MHz */
+ /** VPLL_CON2 */
+ clr = ICP_BOOST(7) | EV_FSEL(1) | FVCO_EN(1) | EV_BYPASS(1) |
+ SSCG_EN(1) | EV_AFC_ENB(1) | EV_DCC_ENB(1) | EXTAFC(1);
+ set = ICP_BOOST(0) | EV_FSEL(1) | FVCO_EN(1) | EV_BYPASS(1) |
+ SSCG_EN(0) | EV_AFC_ENB(0) | EV_DCC_ENB(1) | EXTAFC(0);
+
+ clrsetbits_le32(&clk->vpll_con2, clr, set);
+
+ /** VPLL_CON1 */
+ /* there is null */
+
+ /** VPLL_CON0 */
+ clr_pll_con0 = SDIV(7) | PDIV(63) | MDIV(1023) | FSEL(1) | PLL_ENABLE(1);
+ set = SDIV(3) | PDIV(3) | MDIV(54) | FSEL(0) | PLL_ENABLE(1);
+
+ clrsetbits_le32(&clk->vpll_con0, clr_pll_con0, set);
+
+ /* Wait for PLL to be locked */
+ while (!(readl(&clk->vpll_con0) & PLL_LOCKED_BIT))
+ continue;
+
+/************************************************************
+ *Step 3:
+ *
+ * Wait until the PLL is locked
+ ************************************************************/
+ clr = PLL_LOCKTIME(65535);
+
+ /** APLL LOCKTIME 1000MHz */
+ set = PLL_LOCKTIME(PDIV(3) * 270);
+ clrsetbits_le32(&clk->apll_lock, clr, set);
+
+ /** MPLL LOCKTIME 800MHz */
+ set = PLL_LOCKTIME(PDIV(3) * 270);
+ clrsetbits_le32(&clk->mpll_lock, clr, set);
+
+ /** EPLL LOCKTIME 192MHz */
+ set = PLL_LOCKTIME(PDIV(2) * 270);
+ clrsetbits_le32(&clk->epll_lock, clr, set);
+
+ /** VPLL LOCKTIME 54MHz */
+ set = PLL_LOCKTIME(PDIV(3) * 270);
+ clrsetbits_le32(&clk->vpll_lock, clr, set);
+
+/************************************************************
+ * Step 4:
+ *
+ * Select the PLL output clock instead of input reference clock,
+ * after PLL output clock is stabilized.
+ * (Refer to CLK_SRC_CPU SFR for APLL and MPLL,
+ * CLK_SRC_TOP0 for EPLL and VPLL)
+ * Once a PLL is turned on, do not turn it off.
+ ************************************************************/
+
+ /**
+ * before set system clocks,we switch system clocks src to FINpll
+ *
+ * Bit values: 0 ; 1
+ * MUX_APLL_SEL: FIN_PLL ; MOUTAPLLFOUT
+ * MUX_CORE_SEL: MOUTAPLL ; SCLKMPLL
+ * MUX_HPM_SEL: MOUTAPLL ; SCLKMPLL
+ * MUX_MPLL_USER_SEL_C: FINPLL ; FOUTMPLL
+ */
+ /** CLK_SRC_CPU */
+ clr_src_cpu = MUX_APLL_SEL(1) | MUX_CORE_SEL(1) |
+ MUX_HPM_SEL(1) | MUX_MPLL_USER_SEL_C(1);
+ set = MUX_APLL_SEL(1) | MUX_CORE_SEL(0) | MUX_HPM_SEL(0) |
+ MUX_MPLL_USER_SEL_C(1);
+
+ clrsetbits_le32(&clk->src_cpu, clr_src_cpu, set);
+
+ /* Wait for mux change */
+ while (readl(&clk->mux_stat_cpu) & MUX_STAT_CPU_CHANGING)
+ continue;
+
+ /**
+ * Set CMU_DMC default clocks src to APLL
+ *
+ * Bit values: 0 ; 1
+ * MUX_C2C_SEL: SCLKMPLL ; SCLKAPLL
+ * MUX_DMC_BUS_SEL: SCLKMPLL ; SCLKAPLL
+ * MUX_DPHY_SEL: SCLKMPLL ; SCLKAPLL
+ * MUX_MPLL_SEL: FINPLL ; MOUT_MPLL_FOUT
+ * MUX_PWI_SEL: 0110 (MPLL); 0111 (EPLL); 1000 (VPLL); 0(XXTI)
+ * MUX_G2D_ACP0_SEL: SCLKMPLL ; SCLKAPLL
+ * MUX_G2D_ACP1_SEL: SCLKEPLL ; SCLKVPLL
+ * MUX_G2D_ACP_SEL: OUT_ACP0 ; OUT_ACP1
+ */
+ /** CLK_SRC_DMC */
+ clr_src_dmc = MUX_C2C_SEL(1) | MUX_DMC_BUS_SEL(1) |
+ MUX_DPHY_SEL(1) | MUX_MPLL_SEL(1) |
+ MUX_PWI_SEL(15) | MUX_G2D_ACP0_SEL(1) |
+ MUX_G2D_ACP1_SEL(1) | MUX_G2D_ACP_SEL(1);
+ set = MUX_C2C_SEL(0) | MUX_DMC_BUS_SEL(0) | MUX_DPHY_SEL(0) |
+ MUX_MPLL_SEL(1) | MUX_PWI_SEL(0) | MUX_G2D_ACP0_SEL(0) |
+ MUX_G2D_ACP1_SEL(0) | MUX_G2D_ACP_SEL(0);
+
+ clrsetbits_le32(&clk->src_dmc, clr_src_dmc, set);
+
+ /* Wait for mux change */
+ while (readl(&clk->mux_stat_dmc) & MUX_STAT_DMC_CHANGING)
+ continue;
+
+ /**
+ * Set CMU_TOP default clocks src to APLL
+ *
+ * Bit values: 0 ; 1
+ * MUX_ONENAND_1_SEL MOUTONENAND ; SCLKVPLL
+ * MUX_EPLL_SEL FINPLL ; FOUTEPLL
+ * MUX_VPLL_SEL FINPLL ; FOUTEPLL
+ * MUX_ACLK_200_SEL SCLKMPLL ; SCLKAPLL
+ * MUX_ACLK_100_SEL SCLKMPLL ; SCLKAPLL
+ * MUX_ACLK_160_SEL SCLKMPLL ; SCLKAPLL
+ * MUX_ACLK_133_SEL SCLKMPLL ; SCLKAPLL
+ * MUX_ONENAND_SEL ACLK_133 ; ACLK_160
+ */
+
+ /* CLK_SRC_TOP0 */
+ clr = MUX_ONENAND_1_SEL(1) | MUX_EPLL_SEL(1) | MUX_VPLL_SEL(1) |
+ MUX_ACLK_200_SEL(1) | MUX_ACLK_100_SEL(1) | MUX_ACLK_160_SEL(1) |
+ MUX_ACLK_133_SEL(1) | MUX_ONENAND_SEL(1);
+ set = MUX_ONENAND_1_SEL(0) | MUX_EPLL_SEL(1) | MUX_VPLL_SEL(1) |
+ MUX_ACLK_200_SEL(0) | MUX_ACLK_100_SEL(0) | MUX_ACLK_160_SEL(0) |
+ MUX_ACLK_133_SEL(0) | MUX_ONENAND_SEL(1);
+
+ clrsetbits_le32(&clk->src_top0, clr, set);
+
+ /* Wait for mux change */
+ while (readl(&clk->mux_stat_top0) & MUX_STAT_TOP0_CHANGING)
+ continue;
+
+ /**
+ * Bit values: 0 ; 1
+ * MUX_ACLK_266_GPS_SEL SCLKMPLL_USER_T ; SCLKAPLL
+ * MUX_ACLK_400_MCUISP_SEL SCLKMPLL_USER_T ; SCLKAPLL
+ * MUX_MPLL_USER_SEL_T FINPLL ; SCLKMPLLL
+ * MUX_ACLK_266_GPS_SUB_SEL FINPLL ; DIVOUT_ACLK_266_GPS
+ * MUX_ACLK_200_SUB_SEL FINPLL ; DIVOUT_ACLK_200
+ * MUX_ACLK_400_MCUISP_SUB_SEL FINPLL
+ */
+
+ /* CLK_SRC_TOP1 */
+ clr = MUX_ACLK_266_GPS_SEL(1) | MUX_ACLK_400_MCUISP_SEL(1) |
+ MUX_MPLL_USER_SEL_T(1) | MUX_ACLK_266_GPS_SUB_SEL(1) |
+ MUX_ACLK_200_SUB_SEL(1) | MUX_ACLK_400_MCUISP_SUB_SEL(1);
+ set = MUX_ACLK_266_GPS_SEL(0) | MUX_ACLK_400_MCUISP_SEL(0) |
+ MUX_MPLL_USER_SEL_T(1) | MUX_ACLK_266_GPS_SUB_SEL(1) |
+ MUX_ACLK_200_SUB_SEL(1) | MUX_ACLK_400_MCUISP_SUB_SEL(1);
+
+ clrsetbits_le32(&clk->src_top1, clr, set);
+
+ /* Wait for mux change */
+ while (readl(&clk->mux_stat_top1) & MUX_STAT_TOP1_CHANGING)
+ continue;
+
+ /* CLK_SRC_LEFTBUS */
+ clr = MUX_GDL_SEL(1) | MUX_MPLL_USER_SEL_L(1);
+ set = MUX_GDL_SEL(0) | MUX_MPLL_USER_SEL_L(1);
+
+ clrsetbits_le32(&clk->src_leftbus, clr, set);
+
+ /* Wait for mux change */
+ while (readl(&clk->mux_stat_leftbus) & MUX_STAT_LEFTBUS_CHANGING)
+ continue;
+
+ /* CLK_SRC_RIGHTBUS */
+ clr = MUX_GDR_SEL(1) | MUX_MPLL_USER_SEL_R(1);
+ set = MUX_GDR_SEL(0) | MUX_MPLL_USER_SEL_R(1);
+
+ clrsetbits_le32(&clk->src_rightbus, clr, set);
+
+ /* Wait for mux change */
+ while (readl(&clk->mux_stat_rightbus) & MUX_STAT_RIGHTBUS_CHANGING)
+ continue;
+
+ /** CLK_SRC_PERIL0 */
+ clr = UART0_SEL(15) | UART1_SEL(15) | UART2_SEL(15) |
+ UART3_SEL(15) | UART4_SEL(15);
+ set = UART0_SEL(6) | UART1_SEL(6) | UART2_SEL(6) |
+ UART3_SEL(6) | UART4_SEL(6);
+
+ clrsetbits_le32(&clk->src_peril0, clr, set);
+
+ /** CLK_SRC_FSYS */
+ clr = MMC1_SEL(15) | MMC2_SEL(15) | MMC3_SEL(15) |
+ MMC4_SEL(15) | MIPIHSI_SEL(1);
+ set = MMC1_SEL(6) | MMC2_SEL(6) | MMC3_SEL(6) |
+ MMC4_SEL(6) | MIPIHSI_SEL(0);
+
+ clrsetbits_le32(&clk->src_fsys, clr, set);
+}
+#endif
+
diff --git a/uboot2018.01/arch/arm/mach-exynos/dmc_init_exynos4.c b/uboot2018.01/arch/arm/mach-exynos/dmc_init_exynos4.c
index ecddc72..ca926af 100644
--- a/uboot2018.01/arch/arm/mach-exynos/dmc_init_exynos4.c
+++ b/uboot2018.01/arch/arm/mach-exynos/dmc_init_exynos4.c
@@ -26,7 +26,11 @@
#include <config.h>
#include <asm/arch/dmc.h>
#include "common_setup.h"
+#ifndef CONFIG_ITOP4412
#include "exynos4_setup.h"
+#else
+#include "itop4412_setup.h"
+#endif
struct mem_timings mem = {
.direct_cmd_msr = {
@@ -175,7 +179,7 @@ void mem_ctrl_init(int reset)
* 0: full_sync
*/
writel(1, ASYNC_CONFIG);
-#ifdef CONFIG_ORIGEN
+#ifdef CONFIG_ITOP4412
/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */
writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE +
APB_SFR_INTERLEAVE_CONF_OFFSET);
diff --git a/uboot2018.01/arch/arm/mach-exynos/include/mach/power.h b/uboot2018.01/arch/arm/mach-exynos/include/mach/power.h
index 88f70d9..90a4525 100644
--- a/uboot2018.01/arch/arm/mach-exynos/include/mach/power.h
+++ b/uboot2018.01/arch/arm/mach-exynos/include/mach/power.h
@@ -210,6 +210,216 @@ struct exynos4_power {
unsigned int gps_alive_option;
};
+
+struct exynos4x12_power {
+ unsigned int om_stat;
+ unsigned char res1[0xc];
+ unsigned int rtc_clko_sel;
+ unsigned int gnss_rtc_out_ctrl;
+ unsigned int lpi_denial_mask0;
+ unsigned int lpi_denial_mask1;
+ unsigned int lpi_denial_mask2;
+ unsigned int c2c_ctrl;
+ unsigned char res2[0x1d8];
+ unsigned int central_seq_config;
+ unsigned int res3;
+ unsigned int central_seq_option;
+ unsigned char res4[0x1f4];
+ unsigned int swreset;
+ unsigned int rst_stat;
+ unsigned int auto_wdt_reset_disable;
+ unsigned int mask_wdt_reset_request;
+ unsigned char res5[0x1f0];
+ unsigned int wakeup_stat;
+ unsigned int eint_wakeup_mask;
+ unsigned int wakeup_mask;
+ unsigned char res6[0xf4];
+ unsigned int hdmi_phy_control;
+ unsigned int usbdevice_phy_control;
+ unsigned int hsic_1_phy_control;
+ unsigned int hsic_2_phy_control;
+ unsigned int mipi_phy0_control;
+ unsigned int mipi_phy1_control;
+ unsigned int adc_phy_control;
+ unsigned char res7[0x64];
+ unsigned int body_bias_con0;
+ unsigned int body_bias_con1;
+ unsigned int body_bias_con2;
+ unsigned int body_bias_con3;
+ unsigned char res8[0x70];
+ unsigned int inform0;
+ unsigned int inform1;
+ unsigned int inform2;
+ unsigned int inform3;
+ unsigned int inform4;
+ unsigned int inform5;
+ unsigned int inform6;
+ unsigned int inform7;
+ unsigned char res9[0x1e0];
+ unsigned int pmu_debug;
+ unsigned char res10[0x5fc];
+ unsigned int arm_core0_sys_pwr_reg;
+ unsigned char res11[0xc];
+ unsigned int arm_core1_sys_pwr_reg;
+ unsigned char res12[0x6c];
+ unsigned int arm_common_sys_pwr_reg;
+ unsigned char res13[0x3c];
+ unsigned int arm_cpu_l2_0_sys_pwr_reg;
+ unsigned int arm_cpu_l2_1_sys_pwr_reg;
+ unsigned char res14[0x38];
+ unsigned int cmu_aclkstop_sys_pwr_reg;
+ unsigned int cmu_sclkstop_sys_pwr_reg;
+ unsigned char res15[0x4];
+ unsigned int cmu_reset_sys_pwr_reg;
+ unsigned char res16[0x10];
+ unsigned int apll_sysclk_sys_pwr_reg;
+ unsigned int mpll_sysclk_sys_pwr_reg;
+ unsigned int vpll_sysclk_sys_pwr_reg;
+ unsigned int epll_sysclk_sys_pwr_reg;
+ unsigned char res17[0x8];
+ unsigned int cmu_clkstop_gps_alive_sys_pwr_reg;
+ unsigned int cmu_reset_gps_alive_sys_pwr_reg;
+ unsigned int cmu_clkstop_cam_sys_pwr_reg;
+ unsigned int cmu_clkstop_tv_sys_pwr_reg;
+ unsigned int cmu_clkstop_mfc_sys_pwr_reg;
+ unsigned int cmu_clkstop_g3d_sys_pwr_reg;
+ unsigned int cmu_clkstop_lcd0_sys_pwr_reg;
+ unsigned int cmu_clkstop_isp_sys_pwr_reg;
+ unsigned int cmu_clkstop_maudio_sys_pwr_reg;
+ unsigned int cmu_clkstop_gps_sys_pwr_reg;
+ unsigned int cmu_reset_cam_sys_pwr_reg;
+ unsigned int cmu_reset_tv_sys_pwr_reg;
+ unsigned int cmu_reset_mfc_sys_pwr_reg;
+ unsigned int cmu_reset_g3d_sys_pwr_reg;
+ unsigned int cmu_reset_lcd0_sys_pwr_reg;
+ unsigned int cmu_reset_isp_sys_pwr_reg;
+ unsigned int cmu_reset_maudio_sys_pwr_reg;
+ unsigned int cmu_reset_gps_sys_pwr_reg;
+ unsigned int top_bus_sys_pwr_reg;
+ unsigned int top_retention_sys_pwr_reg;
+ unsigned int top_pwr_sys_pwr_reg;
+ unsigned char res18[0x14];
+ unsigned int logic_reset_sys_pwr_reg;
+ unsigned char res19[0x1c];
+ unsigned int onenandxl_mem_sys_pwr_reg;
+ unsigned int hsi_mem_sys_pwr_reg;
+ unsigned char res20[0x4];
+ unsigned int usbotg_mem_sys_pwr_reg;
+ unsigned int sdmmc_mem_sys_pwr_reg;
+ unsigned int cssys_mem_sys_pwr_reg;
+ unsigned int secss_mem_sys_pwr_reg;
+ unsigned int potator_mem_sys_pwr_reg;
+ unsigned char res21[0x20];
+ unsigned int pad_retention_dram_sys_pwr_reg;
+ unsigned int pad_retention_maudio_sys_pwr_reg;
+ unsigned char res22[0x18];
+ unsigned int pad_retention_gpio_sys_pwr_reg;
+ unsigned int pad_retention_uart_sys_pwr_reg;
+ unsigned int pad_retention_mmca_sys_pwr_reg;
+ unsigned int pad_retention_mmcb_sys_pwr_reg;
+ unsigned int pad_retention_ebia_sys_pwr_reg;
+ unsigned int pad_retention_ebib_sys_pwr_reg;
+ unsigned char res23[0x8];
+ unsigned int pad_isolation_sys_pwr_reg;
+ unsigned char res24[0x1c];
+ unsigned int pad_alv_sel_sys_pwr_reg;
+ unsigned char res25[0x1c];
+ unsigned int xusbxti_sys_pwr_reg;
+ unsigned int xxti_sys_pwr_reg;
+ unsigned char res26[0x38];
+ unsigned int ext_regulator_sys_pwr_reg;
+ unsigned char res27[0x3c];
+ unsigned int gpio_mode_sys_pwr_reg;
+ unsigned char res28[0x3c];
+ unsigned int gpio_mode_maudio_sys_pwr_reg;
+ unsigned char res29[0x3c];
+ unsigned int cam_sys_pwr_reg;
+ unsigned int tv_sys_pwr_reg;
+ unsigned int mfc_sys_pwr_reg;
+ unsigned int g3d_sys_pwr_reg;
+ unsigned int lcd0_sys_pwr_reg;
+ unsigned int isp_sys_pwr_reg;
+ unsigned int maudio_sys_pwr_reg;
+ unsigned int gps_sys_pwr_reg;
+ unsigned int gps_alive_sys_pwr_reg;
+ unsigned char res30[0xc5c];
+ unsigned int arm_core0_configuration;
+ unsigned int arm_core0_status;
+ unsigned int arm_core0_option;
+ unsigned char res31[0x74];
+ unsigned int arm_core1_configuration;
+ unsigned int arm_core1_status;
+ unsigned int arm_core1_option;
+ unsigned char res32[0x37c];
+ unsigned int arm_common_option;
+ unsigned char res33[0x1f4];
+ unsigned int arm_cpu_l2_0_configuration;
+ unsigned int arm_cpu_l2_0_status;
+ unsigned char res34[0x18];
+ unsigned int arm_cpu_l2_1_configuration;
+ unsigned int arm_cpu_l2_1_status;
+ unsigned char res35[0xa00];
+ unsigned int pad_retention_maudio_option;
+ unsigned char res36[0xdc];
+ unsigned int pad_retention_gpio_option;
+ unsigned char res37[0x1c];
+ unsigned int pad_retention_uart_option;
+ unsigned char res38[0x1c];
+ unsigned int pad_retention_mmca_option;
+ unsigned char res39[0x1c];
+ unsigned int pad_retention_mmcb_option;
+ unsigned char res40[0x1c];
+ unsigned int pad_retention_ebia_option;
+ unsigned char res41[0x1c];
+ unsigned int pad_retention_ebib_option;
+ unsigned char res42[0x160];
+ unsigned int ps_hold_control;
+ unsigned char res43[0xf0];
+ unsigned int xusbxti_configuration;
+ unsigned int xusbxti_status;
+ unsigned char res44[0x14];
+ unsigned int xusbxti_duration;
+ unsigned int xxti_configuration;
+ unsigned int xxti_status;
+ unsigned char res45[0x14];
+ unsigned int xxti_duration;
+ unsigned char res46[0x1dc];
+ unsigned int ext_regulator_duration;
+ unsigned char res47[0x5e0];
+ unsigned int cam_configuration;
+ unsigned int cam_status;
+ unsigned int cam_option;
+ unsigned char res48[0x14];
+ unsigned int tv_configuration;
+ unsigned int tv_status;
+ unsigned int tv_option;
+ unsigned char res49[0x14];
+ unsigned int mfc_configuration;
+ unsigned int mfc_status;
+ unsigned int mfc_option;
+ unsigned char res50[0x14];
+ unsigned int g3d_configuration;
+ unsigned int g3d_status;
+ unsigned int g3d_option;
+ unsigned char res51[0x14];
+ unsigned int lcd0_configuration;
+ unsigned int lcd0_status;
+ unsigned int lcd0_option;
+ unsigned char res52[0x14];
+ unsigned int isp_configuration;
+ unsigned int isp_status;
+ unsigned int isp_option;
+ unsigned char res53[0x34];
+ unsigned int gps_configuration;
+ unsigned int gps_status;
+ unsigned int gps_option;
+ unsigned char res54[0x14];
+ unsigned int gps_alive_configuration;
+ unsigned int gps_alive_status;
+ unsigned int gps_alive_option;
+};
+
+
struct exynos4412_power {
unsigned char res1[0x0704];
unsigned int usbhost_phy_control;
diff --git a/uboot2018.01/arch/arm/mach-exynos/itop4412_setup.h b/uboot2018.01/arch/arm/mach-exynos/itop4412_setup.h
new file mode 100644
index 0000000..3e10bb4
--- /dev/null
+++ b/uboot2018.01/arch/arm/mach-exynos/itop4412_setup.h
@@ -0,0 +1,599 @@
+#ifndef _ITOP4412_SETUP_H
+#define _ITOP4412_SETUP_H
+
+#include <config.h>
+#include <asm/arch/cpu.h>
+
+#ifdef CONFIG_CLK_800_330_165
+#define DRAM_CLK_330
+#endif
+#ifdef CONFIG_CLK_1000_200_200
+#define DRAM_CLK_200
+#endif
+#ifdef CONFIG_CLK_1000_330_165
+#define DRAM_CLK_330
+#endif
+#ifdef CONFIG_CLK_1000_400_200
+#define DRAM_CLK_400
+#endif
+
+/* this state is changing for register */
+#define MUX_STAT_CHANGING 0x100
+#define DIV_STAT_CHANGING 0x1
+
+/* A/M/EV PLL_CON0 */
+#define SDIV(x) ((x) & 0x7)
+#define PDIV(x) (((x) & 0x3f) << 8)
+#define MDIV(x) (((x) & 0x3ff) << 16)
+#define FSEL(x) (((x) & 0x1) << 27)
+#define PLL_LOCKED_BIT (0x1 << 29)
+#define PLL_ENABLE(x) (((x) & 0x1) << 31)
+
+/* A/M PLL_CON1 */
+#define AFC(x) ((x) & 0x1f)
+#define LOCK_CON_DLY(x) (((x) & 0x1f) << 8)
+#define LOCK_CON_IN(x) (((x) & 0x3) << 12)
+#define LOCK_CON_OUT(x) (((x) & 0x3) << 14)
+#define FEED_EN(x) (((x) & 0x1) << 16)
+#define AFC_ENB(x) (((x) & 0x1) << 20)
+#define DCC_ENB(x) (((x) & 0x1) << 21)
+#define BYPASS(x) (((x) & 0x1) << 22)
+#define RESV0(x) (((x) & 0x1) << 23)
+#define RESV1(x) (((x) & 0x1) << 24)
+
+/* E/V PLL_CON1 */
+#define K(x) ((x) & 0xffff)
+#define MFR(x) (((x) & 0xff) << 16)
+#define MRR(x) (((x) & 0x1f) << 24)
+#define SEL_PF(x) (((x) & 0x3) << 29)
+
+/* E/V PLL_CON2 */
+#define ICP_BOOST(x) ((x) & 0x3)
+#define EV_FSEL(x) (((x) & 0x1) << 2)
+#define FVCO_EN(x) (((x) & 0x1) << 3)
+#define EV_BYPASS(x) (((x) & 0x1) << 4)
+#define SSCG_EN(x) (((x) & 0x1) << 5)
+#define EV_AFC_ENB(x) (((x) & 0x1) << 6)
+#define EV_DCC_ENB(x) (((x) & 0x1) << 7)
+#define EXTAFC(x) (((x) & 0x1f) << 8)
+
+/* CLK_SRC_CPU */
+#define MUX_APLL_SEL(x) ((x) & 0x1)
+#define MUX_CORE_SEL(x) (((x) & 0x1) << 16)
+#define MUX_HPM_SEL(x) (((x) & 0x1) << 20)
+#define MUX_MPLL_USER_SEL_C(x) (((x) & 0x1) << 24)
+
+/* CLK_MUX_STAT_CPU */
+#define APLL_SEL(x) ((x) & 0x7)
+#define CORE_SEL(x) (((x) & 0x7) << 16)
+#define HPM_SEL(x) (((x) & 0x7) << 20)
+#define MPLL_USER_SEL_C(x) (((x) & 0x7) << 24)
+#define MUX_STAT_CPU_CHANGING (APLL_SEL(MUX_STAT_CHANGING) | \
+ CORE_SEL(MUX_STAT_CHANGING) | \
+ HPM_SEL(MUX_STAT_CHANGING) | \
+ MPLL_USER_SEL_C(MUX_STAT_CHANGING))
+
+/* A/M/E/V PLL_LOCK */
+#define PLL_LOCKTIME(x) ((x) & 0xffff)
+
+/* CLK_DIV_CPU0 */
+#define CORE_RATIO(x) ((x) & 0x7)
+#define COREM0_RATIO(x) (((x) & 0x7) << 4)
+#define COREM1_RATIO(x) (((x) & 0x7) << 8)
+#define PERIPH_RATIO(x) (((x) & 0x7) << 12)
+#define ATB_RATIO(x) (((x) & 0x7) << 16)
+#define PCLK_DBG_RATIO(x) (((x) & 0x7) << 20)
+#define APLL_RATIO(x) (((x) & 0x7) << 24)
+#define CORE2_RATIO(x) (((x) & 0x7) << 28)
+
+/* CLK_DIV_CPU1 */
+#define COPY_RATIO(x) ((x) & 0x7)
+#define HPM_RATIO(x) (((x) & 0x7) << 4)
+#define CORES_RATIO(x) (((x) & 0x7) << 8)
+
+/* CLK_DIV_STAT_CPU0 */
+#define DIV_CORE(x) ((x) & 0x1)
+#define DIV_COREM0(x) (((x) & 0x1) << 4)
+#define DIV_COREM1(x) (((x) & 0x1) << 8)
+#define DIV_PERIPH(x) (((x) & 0x1) << 12)
+#define DIV_ATB(x) (((x) & 0x1) << 16)
+#define DIV_PCLK_DBG(x) (((x) & 0x1) << 20)
+#define DIV_APLL(x) (((x) & 0x1) << 24)
+#define DIV_CORE2(x) (((x) & 0x1) << 28)
+
+#define DIV_STAT_CPU0_CHANGING (DIV_CORE(DIV_STAT_CHANGING) | \
+ DIV_COREM0(DIV_STAT_CHANGING) | \
+ DIV_COREM1(DIV_STAT_CHANGING) | \
+ DIV_PERIPH(DIV_STAT_CHANGING) | \
+ DIV_ATB(DIV_STAT_CHANGING) | \
+ DIV_PCLK_DBG(DIV_STAT_CHANGING) | \
+ DIV_APLL(DIV_STAT_CHANGING) | \
+ DIV_CORE2(DIV_STAT_CHANGING))
+
+/* CLK_DIV_STAT_CPU1 */
+#define DIV_COPY(x) ((x) & 0x1)
+#define DIV_HPM(x) (((x) & 0x1) << 4)
+#define DIV_CORES(x) (((x) & 0x1) << 8)
+
+#define DIV_STAT_CPU1_CHANGING (DIV_COPY(DIV_STAT_CHANGING) | \
+ DIV_HPM(DIV_STAT_CHANGING) | \
+ DIV_CORES(DIV_STAT_CHANGING))
+
+/* CLK_SRC_DMC */
+#define MUX_C2C_SEL(x) ((x) & 0x1)
+#define MUX_DMC_BUS_SEL(x) (((x) & 0x1) << 4)
+#define MUX_DPHY_SEL(x) (((x) & 0x1) << 8)
+#define MUX_MPLL_SEL(x) (((x) & 0x1) << 12)
+#define MUX_PWI_SEL(x) (((x) & 0xf) << 16)
+#define MUX_G2D_ACP0_SEL(x) (((x) & 0x1) << 20)
+#define MUX_G2D_ACP1_SEL(x) (((x) & 0x1) << 24)
+#define MUX_G2D_ACP_SEL(x) (((x) & 0x1) << 28)
+
+/* CLK_MUX_STAT_DMC */
+#define C2C_SEL(x) ((x) & 0x7)
+#define DMC_BUS_SEL(x) (((x) & 0x7) << 4)
+#define DPHY_SEL(x) (((x) & 0x7) << 8)
+#define MPLL_SEL(x) (((x) & 0x7) << 12)
+#define G2D_ACP0_SEL(x) (((x) & 0x7) << 20)
+#define G2D_ACP1_SEL(x) (((x) & 0x7) << 24)
+#define G2D_ACP_SEL(x) (((x) & 0x7) << 28)
+
+#define MUX_STAT_DMC_CHANGING (C2C_SEL(MUX_STAT_CHANGING) | \
+ DMC_BUS_SEL(MUX_STAT_CHANGING) | \
+ DPHY_SEL(MUX_STAT_CHANGING) | \
+ MPLL_SEL(MUX_STAT_CHANGING) |\
+ G2D_ACP0_SEL(MUX_STAT_CHANGING) | \
+ G2D_ACP1_SEL(MUX_STAT_CHANGING) | \
+ G2D_ACP_SEL(MUX_STAT_CHANGING))
+
+/* CLK_DIV_DMC0 */
+#define ACP_RATIO(x) ((x) & 0x7)
+#define ACP_PCLK_RATIO(x) (((x) & 0x7) << 4)
+#define DPHY_RATIO(x) (((x) & 0x7) << 8)
+#define DMC_RATIO(x) (((x) & 0x7) << 12)
+#define DMCD_RATIO(x) (((x) & 0x7) << 16)
+#define DMCP_RATIO(x) (((x) & 0x7) << 20)
+
+/* CLK_DIV_DMC1 */
+#define G2D_ACP_RATIO(x) ((x) & 0xf)
+#define C2C_RATIO(x) (((x) & 0x7) << 4)
+#define PWI_RATIO(x) (((x) & 0xf) << 8)
+#define C2C_ACLK_RATIO(x) (((x) & 0x7) << 12)
+#define DVSEM_RATIO(x) (((x) & 0x7f) << 16)
+#define DPM_RATIO(x) (((x) & 0x7f) << 24)
+
+/* CLK_DIV_STAT_DMC0 */
+#define DIV_ACP(x) ((x) & 0x1)
+#define DIV_ACP_PCLK(x) (((x) & 0x1) << 4)
+#define DIV_DPHY(x) (((x) & 0x1) << 8)
+#define DIV_DMC(x) (((x) & 0x1) << 12)
+#define DIV_DMCD(x) (((x) & 0x1) << 16)
+#define DIV_DMCP(x) (((x) & 0x1) << 20)
+
+#define DIV_STAT_DMC0_CHANGING (DIV_ACP(DIV_STAT_CHANGING) | \
+ DIV_ACP_PCLK(DIV_STAT_CHANGING) | \
+ DIV_DPHY(DIV_STAT_CHANGING) | \
+ DIV_DMC(DIV_STAT_CHANGING) | \
+ DIV_DMCD(DIV_STAT_CHANGING) | \
+ DIV_DMCP(DIV_STAT_CHANGING))
+
+/* CLK_DIV_STAT_DMC1 */
+#define DIV_G2D_ACP(x) ((x) & 0x1)
+#define DIV_C2C(x) (((x) & 0x1) << 4)
+#define DIV_PWI(x) (((x) & 0x1) << 8)
+#define DIV_C2C_ACLK(x) (((x) & 0x1) << 12)
+#define DIV_DVSEM(x) (((x) & 0x1) << 16)
+#define DIV_DPM(x) (((x) & 0x1) << 24)
+
+#define DIV_STAT_DMC1_CHANGING (DIV_G2D_ACP(DIV_STAT_CHANGING) | \
+ DIV_C2C(DIV_STAT_CHANGING) | \
+ DIV_PWI(DIV_STAT_CHANGING) | \
+ DIV_C2C_ACLK(DIV_STAT_CHANGING) | \
+ DIV_DVSEM(DIV_STAT_CHANGING) | \
+ DIV_DPM(DIV_STAT_CHANGING))
+
+/* CLK_SRC_TOP0 */
+#define MUX_ONENAND_1_SEL(x) ((x) & 0x1)
+#define MUX_EPLL_SEL(x) (((x) & 0x1) << 4)
+#define MUX_VPLL_SEL(x) (((x) & 0x1) << 8)
+#define MUX_ACLK_200_SEL(x) (((x) & 0x1) << 12)
+#define MUX_ACLK_100_SEL(x) (((x) & 0x1) << 16)
+#define MUX_ACLK_160_SEL(x) (((x) & 0x1) << 20)
+#define MUX_ACLK_133_SEL(x) (((x) & 0x1) << 24)
+#define MUX_ONENAND_SEL(x) (((x) & 0x1) << 28)
+
+/* CLK_MUX_STAT_TOP */
+#define ONENAND_1_SEL(x) ((x) & 0x3)
+#define EPLL_SEL(x) (((x) & 0x3) << 4)
+#define VPLL_SEL(x) (((x) & 0x3) << 8)
+#define ACLK_200_SEL(x) (((x) & 0x3) << 12)
+#define ACLK_100_SEL(x) (((x) & 0x3) << 16)
+#define ACLK_160_SEL(x) (((x) & 0x3) << 20)
+#define ACLK_133_SEL(x) (((x) & 0x3) << 24)
+#define ONENAND_SEL(x) (((x) & 0x3) << 28)
+
+#define MUX_STAT_TOP0_CHANGING (ONENAND_1_SEL(MUX_STAT_CHANGING) | \
+ EPLL_SEL(MUX_STAT_CHANGING) | \
+ EPLL_SEL(MUX_STAT_CHANGING) | \
+ VPLL_SEL(MUX_STAT_CHANGING) | \
+ ACLK_200_SEL(MUX_STAT_CHANGING) | \
+ ACLK_100_SEL(MUX_STAT_CHANGING) | \
+ ACLK_160_SEL(MUX_STAT_CHANGING) | \
+ ACLK_133_SEL(MUX_STAT_CHANGING) | \
+ ONENAND_SEL(MUX_STAT_CHANGING))
+
+/* CLK_SRC_TOP1 */
+#define MUX_ACLK_266_GPS_SEL(x) (((x) & 0x1) << 4)
+#define MUX_ACLK_400_MCUISP_SEL(x) (((x) & 0x1) << 8)
+#define MUX_MPLL_USER_SEL_T(x) (((x) & 0x1) << 12)
+#define MUX_ACLK_266_GPS_SUB_SEL(x) (((x) & 0x1) << 16)
+#define MUX_ACLK_200_SUB_SEL(x) (((x) & 0x1) << 20)
+#define MUX_ACLK_400_MCUISP_SUB_SEL(x) (((x) & 0x1) << 24)
+
+/* CLK_MUX_STAT_TOP1 */
+#define ACLK_266_GPS_SEL(x) (((x) & 0x3) << 4)
+#define ACLK_400_MCUISP_SEL(x) (((x) & 0x3) << 8)
+#define MPLL_USER_SEL_T(x) (((x) & 0x3) << 12)
+#define ACLK_266_GPS_SUB_SEL(x) (((x) & 0x3) << 16)
+#define ACLK_200_SUB_SEL(x) (((x) & 0x3) << 20)
+#define ACLK_400_MCUISP_SUB_SEL(x) (((x) & 0x3) << 24)
+
+#define MUX_STAT_TOP1_CHANGING (MUX_ACLK_266_GPS_SEL(MUX_STAT_CHANGING) | \
+ ACLK_400_MCUISP_SEL(MUX_STAT_CHANGING) | \
+ MPLL_USER_SEL_T(MUX_STAT_CHANGING) | \
+ ACLK_266_GPS_SUB_SEL(MUX_STAT_CHANGING) | \
+ ACLK_200_SUB_SEL(MUX_STAT_CHANGING) | \
+ ACLK_400_MCUISP_SUB_SEL(MUX_STAT_CHANGING))
+
+/* CLK_DIV_TOP */
+#define ACLK_200_RATIO(x) ((x) & 0x7)
+#define ACLK_100_RATIO(x) (((x) & 0xf) << 4)
+#define ACLK_160_RATIO(x) (((x) & 0x7) << 8)
+#define ACLK_133_RATIO(x) (((x) & 0x7) << 12)
+#define ONENAND_RATIO(x) (((x) & 0x7) << 16)
+#define ACLK_266_GPS_RATIO(x) (((x) & 0x7) << 20)
+#define ACLK_400_MCUISP_RATIO(x) (((x) & 0x7) << 24)
+
+#define DIV_STAT_TOP_CHANGING (ACLK_400_MCUISP_RATIO(DIV_STAT_CHANGING) | \
+ ACLK_266_GPS_RATIO(DIV_STAT_CHANGING) | \
+ ONENAND_RATIO(DIV_STAT_CHANGING) | \
+ ACLK_133_RATIO(DIV_STAT_CHANGING) | \
+ ACLK_160_RATIO(DIV_STAT_CHANGING) | \
+ ACLK_100_RATIO(DIV_STAT_CHANGING) | \
+ ACLK_200_RATIO(DIV_STAT_CHANGING))
+
+/* CLK_SRC_LEFTBUS */
+#define MUX_GDL_SEL(x) ((x) & 0x1)
+#define MUX_MPLL_USER_SEL_L(x) (((x) & 0x1) << 4)
+
+/* CLK_MUX_STAT_LEFTBUS */
+#define GDL_SEL(x) ((x) & 0x7)
+#define MPLL_USER_SEL_L(x) (((x) & 0x7) << 4)
+
+#define MUX_STAT_LEFTBUS_CHANGING (GDL_SEL(MUX_STAT_CHANGING) | \
+ MPLL_USER_SEL_L(MUX_STAT_CHANGING))
+
+/* CLK_DIV_LEFTBUS */
+#define GDL_RATIO(x) ((x) & 0x7)
+#define GPL_RATIO(x) (((x) & 0x7) << 4)
+
+/* CLK_DIV_STAT_LEFTBUS */
+#define DIV_GDL(x) ((x) & 0x1)
+#define DIV_GPL(x) (((x) & 0x1) << 4)
+
+#define DIV_STAT_LEFTBUS_CHANGING (DIV_GDL(DIV_STAT_CHANGING) | \
+ DIV_GPL(DIV_STAT_CHANGING))
+
+/* CLK_SRC_RIGHTBUS */
+#define MUX_GDR_SEL(x) ((x) & 0x1)
+#define MUX_MPLL_USER_SEL_R(x) (((x) & 0x1) << 4)
+
+/* CLK_MUX_STAT_RIGHTBUS */
+#define GDR_SEL(x) ((x) & 0x7)
+#define MPLL_USER_SEL_R(x) (((x) & 0x7) << 4)
+
+#define MUX_STAT_RIGHTBUS_CHANGING (GDR_SEL(MUX_STAT_CHANGING) | \
+ MPLL_USER_SEL_R(MUX_STAT_CHANGING))
+
+/* CLK_DIV_RIGHTBUS */
+#define GPR_RATIO(x) ((x) & 0x7)
+#define GDR_RATIO(x) (((x) & 0x7) << 4)
+
+/* CLK_DIV_STAT_RIGHTBUS */
+#define DIV_GDR(x) ((x) & 0x1)
+#define DIV_GPR(x) ((x) & 0x1)
+
+#define DIV_STAT_RIGHTBUS_CHANGING (DIV_GDR(DIV_STAT_CHANGING) | \
+ DIV_GPR(DIV_STAT_CHANGING))
+
+/* CLK_SRC_PERIL0 */
+#define UART0_SEL(x) ((x) & 0xf)
+#define UART1_SEL(x) (((x) & 0xf) << 4)
+#define UART2_SEL(x) (((x) & 0xf) << 8)
+#define UART3_SEL(x) (((x) & 0xf) << 12)
+#define UART4_SEL(x) (((x) & 0xf) << 16)
+
+/* CLK_DIV_PERIL0 */
+#define UART0_RATIO(x) ((x) & 0xf)
+#define UART1_RATIO(x) (((x) & 0xf) << 4)
+#define UART2_RATIO(x) (((x) & 0xf) << 8)
+#define UART3_RATIO(x) (((x) & 0xf) << 12)
+#define UART4_RATIO(x) (((x) & 0xf) << 16)
+
+/* CLK_DIV_STAT_PERIL0 */
+#define DIV_UART0(x) ((x) & 0x1)
+#define DIV_UART1(x) (((x) & 0x1) << 4)
+#define DIV_UART2(x) (((x) & 0x1) << 8)
+#define DIV_UART3(x) (((x) & 0x1) << 12)
+#define DIV_UART4(x) (((x) & 0x1) << 16)
+
+#define DIV_STAT_PERIL0_CHANGING (DIV_UART4(DIV_STAT_CHANGING) | \
+ DIV_UART3(DIV_STAT_CHANGING) | \
+ DIV_UART2(DIV_STAT_CHANGING) | \
+ DIV_UART1(DIV_STAT_CHANGING) | \
+ DIV_UART0(DIV_STAT_CHANGING))
+
+/* CLK_SRC_FSYS */
+#define MMC1_SEL(x) (((x) & 0xf) << 4)
+#define MMC2_SEL(x) (((x) & 0xf) << 8)
+#define MMC3_SEL(x) (((x) & 0xf) << 12)
+#define MMC4_SEL(x) (((x) & 0xf) << 16)
+#define MIPIHSI_SEL(x) (((x) & 0x1) << 24)
+
+/* CLK_DIV_FSYS0 */
+#define MIPIHSI_RATIO(x) (((x) & 0xf) << 20)
+
+/* CLK_DIV_STAT_FSYS0 */
+#define DIV_MIPIHSI(x) (((x) & 0x1) << 20)
+
+#define DIV_STAT_FSYS0_CHANGING (DIV_MIPIHSI(DIV_STAT_CHANGING))
+
+/* CLK_DIV_FSYS1 */
+#define MMC0_RATIO(x) ((x) & 0xf)
+#define MMC0_PRE_RATIO(x) (((x) & 0xff) << 8)
+#define MMC1_RATIO(x) (((x) & 0xf) << 16)
+#define MMC1_PRE_RATIO(x) (((x) & 0xff) << 24)
+
+/* CLK_DIV_STAT_FSYS1 */
+#define DIV_MMC0(x) ((x) & 1)
+#define DIV_MMC0_PRE(x) (((x) & 1) << 8)
+#define DIV_MMC1(x) (((x) & 1) << 16)
+#define DIV_MMC1_PRE(x) (((x) & 1) << 24)
+
+#define DIV_STAT_FSYS1_CHANGING (DIV_MMC0(DIV_STAT_CHANGING) | \
+ DIV_MMC0_PRE(DIV_STAT_CHANGING) | \
+ DIV_MMC1(DIV_STAT_CHANGING) | \
+ DIV_MMC1_PRE(DIV_STAT_CHANGING))
+
+/* CLK_DIV_FSYS2 */
+#define MMC2_RATIO(x) ((x) & 0xf)
+#define MMC2_PRE_RATIO(x) (((x) & 0xff) << 8)
+#define MMC3_RATIO(x) (((x) & 0xf) << 16)
+#define MMC3_PRE_RATIO(x) (((x) & 0xff) << 24)
+
+/* CLK_DIV_STAT_FSYS2 */
+#define DIV_MMC2(x) ((x) & 0x1)
+#define DIV_MMC2_PRE(x) (((x) & 0x1) << 8)
+#define DIV_MMC3(x) (((x) & 0x1) << 16)
+#define DIV_MMC3_PRE(x) (((x) & 0x1) << 24)
+
+#define DIV_STAT_FSYS2_CHANGING (DIV_MMC2(DIV_STAT_CHANGING) | \
+ DIV_MMC2_PRE(DIV_STAT_CHANGING) | \
+ DIV_MMC3(DIV_STAT_CHANGING) | \
+ DIV_MMC3_PRE(DIV_STAT_CHANGING))
+
+/* CLK_DIV_FSYS3 */
+#define MMC4_RATIO(x) ((x) & 0x7)
+#define MMC4_PRE_RATIO(x) (((x) & 0xff) << 8)
+
+/* CLK_DIV_STAT_FSYS3 */
+#define DIV_MMC4(x) ((x) & 0x1)
+#define DIV_MMC4_PRE(x) (((x) & 0x1) << 8)
+
+#define DIV_STAT_FSYS3_CHANGING (DIV_MMC4(DIV_STAT_CHANGING) | \
+ DIV_MMC4_PRE(DIV_STAT_CHANGING))
+
+/* DMC */
+#ifdef CONFIG_CLK_800_330_165
+#define DRAM_CLK_330
+#endif
+#ifdef CONFIG_CLK_1000_200_200
+#define DRAM_CLK_200
+#endif
+#ifdef CONFIG_CLK_1000_330_165
+#define DRAM_CLK_330
+#endif
+#ifdef CONFIG_CLK_1000_400_200
+#define DRAM_CLK_400
+#endif
+
+/* Bus Configuration Register Address */
+#define ASYNC_CONFIG 0x10010350
+
+#define DIRECT_CMD_NOP 0x07000000
+#define DIRECT_CMD_ZQ 0x0a000000
+#define DIRECT_CMD_CHIP1_SHIFT (1 << 20)
+#define MEM_TIMINGS_MSR_COUNT 4
+#define CTRL_START (1 << 0)
+#define CTRL_DLL_ON (1 << 1)
+#define AREF_EN (1 << 5)
+#define DRV_TYPE (1 << 6)
+
+struct mem_timings {
+ unsigned direct_cmd_msr[MEM_TIMINGS_MSR_COUNT];
+ unsigned timingref;
+ unsigned timingrow;
+ unsigned timingdata;
+ unsigned timingpower;
+ unsigned zqcontrol;
+ unsigned control0;
+ unsigned control1;
+ unsigned control2;
+ unsigned concontrol;
+ unsigned prechconfig;
+ unsigned memcontrol;
+ unsigned memconfig0;
+ unsigned memconfig1;
+ unsigned dll_resync;
+ unsigned dll_on;
+};
+
+/* MIU */
+/* MIU Config Register Offsets*/
+#define APB_SFR_INTERLEAVE_CONF_OFFSET 0x400
+#define APB_SFR_ARBRITATION_CONF_OFFSET 0xC00
+#define ABP_SFR_SLV_ADDRMAP_CONF_OFFSET 0x800
+#define ABP_SFR_INTERLEAVE_ADDRMAP_START_OFFSET 0x808
+#define ABP_SFR_INTERLEAVE_ADDRMAP_END_OFFSET 0x810
+#define ABP_SFR_SLV0_SINGLE_ADDRMAP_START_OFFSET 0x818
+#define ABP_SFR_SLV0_SINGLE_ADDRMAP_END_OFFSET 0x820
+#define ABP_SFR_SLV1_SINGLE_ADDRMAP_START_OFFSET 0x828
+#define ABP_SFR_SLV1_SINGLE_ADDRMAP_END_OFFSET 0x830
+
+#if (defined CONFIG_ORIGEN) || (defined CONFIG_ITOP4412)
+/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */
+#define APB_SFR_INTERLEAVE_CONF_VAL 0x20001507
+#define APB_SFR_ARBRITATION_CONF_VAL 0x00000001
+#endif
+
+#define INTERLEAVE_ADDR_MAP_START_ADDR 0x40000000
+#define INTERLEAVE_ADDR_MAP_END_ADDR 0xbfffffff
+#define INTERLEAVE_ADDR_MAP_EN 0x00000001
+
+#ifdef CONFIG_MIU_1BIT_INTERLEAVED
+/* Interleave_bit0: 0xC*/
+#define APB_SFR_INTERLEAVE_CONF_VAL 0x0000000c
+#endif
+#ifdef CONFIG_MIU_2BIT_INTERLEAVED
+/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0xc */
+#define APB_SFR_INTERLEAVE_CONF_VAL 0x2000150c
+#endif
+#define SLAVE0_SINGLE_ADDR_MAP_START_ADDR 0x40000000
+#define SLAVE0_SINGLE_ADDR_MAP_END_ADDR 0x7fffffff
+#define SLAVE1_SINGLE_ADDR_MAP_START_ADDR 0x80000000
+#define SLAVE1_SINGLE_ADDR_MAP_END_ADDR 0xbfffffff
+/* Enable SME0 and SME1*/
+#define APB_SFR_SLV_ADDR_MAP_CONF_VAL 0x00000006
+
+#define FORCE_DLL_RESYNC 3
+#define DLL_CONTROL_ON 1
+
+#define DIRECT_CMD1 0x00020000
+#define DIRECT_CMD2 0x00030000
+#define DIRECT_CMD3 0x00010002
+#define DIRECT_CMD4 0x00000328
+
+#define CTRL_ZQ_MODE_NOTERM (0x1 << 0)
+#define CTRL_ZQ_START (0x1 << 1)
+#define CTRL_ZQ_DIV (0 << 4)
+#define CTRL_ZQ_MODE_DDS (0x7 << 8)
+#define CTRL_ZQ_MODE_TERM (0x2 << 11)
+#define CTRL_ZQ_FORCE_IMPN (0x5 << 14)
+#define CTRL_ZQ_FORCE_IMPP (0x6 << 17)
+#define CTRL_DCC (0xE38 << 20)
+#define ZQ_CONTROL_VAL (CTRL_ZQ_MODE_NOTERM | CTRL_ZQ_START\
+ | CTRL_ZQ_DIV | CTRL_ZQ_MODE_DDS\
+ | CTRL_ZQ_MODE_TERM | CTRL_ZQ_FORCE_IMPN\
+ | CTRL_ZQ_FORCE_IMPP | CTRL_DCC)
+
+#define ASYNC (0 << 0)
+#define CLK_RATIO (1 << 1)
+#define DIV_PIPE (1 << 3)
+#define AWR_ON (1 << 4)
+#define AREF_DISABLE (0 << 5)
+#define DRV_TYPE_DISABLE (0 << 6)
+#define CHIP0_NOT_EMPTY (0 << 8)
+#define CHIP1_NOT_EMPTY (0 << 9)
+#define DQ_SWAP_DISABLE (0 << 10)
+#define QOS_FAST_DISABLE (0 << 11)
+#define RD_FETCH (0x3 << 12)
+#define TIMEOUT_LEVEL0 (0xFFF << 16)
+#define CONCONTROL_VAL (ASYNC | CLK_RATIO | DIV_PIPE | AWR_ON\
+ | AREF_DISABLE | DRV_TYPE_DISABLE\
+ | CHIP0_NOT_EMPTY | CHIP1_NOT_EMPTY\
+ | DQ_SWAP_DISABLE | QOS_FAST_DISABLE\
+ | RD_FETCH | TIMEOUT_LEVEL0)
+
+#define CLK_STOP_DISABLE (0 << 1)
+#define DPWRDN_DISABLE (0 << 2)
+#define DPWRDN_TYPE (0 << 3)
+#define TP_DISABLE (0 << 4)
+#define DSREF_DIABLE (0 << 5)
+#define ADD_LAT_PALL (1 << 6)
+#define MEM_TYPE_DDR3 (0x6 << 8)
+#define MEM_WIDTH_32 (0x2 << 12)
+#define NUM_CHIP_2 (0 << 16)
+#define BL_8 (0x3 << 20)
+#define MEMCONTROL_VAL (CLK_STOP_DISABLE | DPWRDN_DISABLE\
+ | DPWRDN_TYPE | TP_DISABLE | DSREF_DIABLE\
+ | ADD_LAT_PALL | MEM_TYPE_DDR3 | MEM_WIDTH_32\
+ | NUM_CHIP_2 | BL_8)
+
+
+#define CHIP_BANK_8 (0x3 << 0)
+#define CHIP_ROW_14 (0x3 << 4)
+#define CHIP_COL_10 (0x3 << 8)
+#define CHIP_MAP_INTERLEAVED (1 << 12)
+#define CHIP_MASK (0xC0 << 16)
+#ifdef CONFIG_MIU_LINEAR
+#define CHIP0_BASE (0x40 << 24)
+#define CHIP1_BASE (0x60 << 24)
+#else
+#define CHIP0_BASE (0x40 << 24)
+#define CHIP1_BASE (0x80 << 24)
+#endif
+#define MEMCONFIG0_VAL (CHIP_BANK_8 | CHIP_ROW_14 | CHIP_COL_10\
+ | CHIP_MAP_INTERLEAVED | CHIP_MASK | CHIP0_BASE)
+#define MEMCONFIG1_VAL (CHIP_BANK_8 | CHIP_ROW_14 | CHIP_COL_10\
+ | CHIP_MAP_INTERLEAVED | CHIP_MASK | CHIP1_BASE)
+
+#define TP_CNT (0xff << 24)
+#define PRECHCONFIG TP_CNT
+
+#define CTRL_OFF (0 << 0)
+#define CTRL_DLL_OFF (0 << 1)
+#define CTRL_HALF (0 << 2)
+#define CTRL_DFDQS (1 << 3)
+#define DQS_DELAY (0 << 4)
+#define CTRL_START_POINT (0x10 << 8)
+#define CTRL_INC (0x10 << 16)
+#define CTRL_FORCE (0x71 << 24)
+#define CONTROL0_VAL (CTRL_OFF | CTRL_DLL_OFF | CTRL_HALF\
+ | CTRL_DFDQS | DQS_DELAY | CTRL_START_POINT\
+ | CTRL_INC | CTRL_FORCE)
+
+#define CTRL_SHIFTC (0x6 << 0)
+#define CTRL_REF (8 << 4)
+#define CTRL_SHGATE (1 << 29)
+#define TERM_READ_EN (1 << 30)
+#define TERM_WRITE_EN (1 << 31)
+#define CONTROL1_VAL (CTRL_SHIFTC | CTRL_REF | CTRL_SHGATE\
+ | TERM_READ_EN | TERM_WRITE_EN)
+
+#define CONTROL2_VAL 0x00000000
+
+#ifdef CONFIG_ITOP4412
+#define TIMINGREF_VAL 0x000000BB
+#define TIMINGROW_VAL 0x4046654f
+#define TIMINGDATA_VAL 0x46400506
+#define TIMINGPOWER_VAL 0x52000A3C
+#else
+#define TIMINGREF_VAL 0x000000BC
+#ifdef DRAM_CLK_330
+#define TIMINGROW_VAL 0x3545548d
+#define TIMINGDATA_VAL 0x45430506
+#define TIMINGPOWER_VAL 0x4439033c
+#endif
+#ifdef DRAM_CLK_400
+#define TIMINGROW_VAL 0x45430506
+#define TIMINGDATA_VAL 0x56500506
+#define TIMINGPOWER_VAL 0x5444033d
+#endif
+#endif
+
+#ifdef CONFIG_BOARD_TYPES
+extern void sdelay(unsigned long);
+#endif
+
+
+#endif
\ No newline at end of file
diff --git a/uboot2018.01/arch/arm/mach-exynos/lowlevel_init.c b/uboot2018.01/arch/arm/mach-exynos/lowlevel_init.c
index 1e090fd..6ca227d 100644
--- a/uboot2018.01/arch/arm/mach-exynos/lowlevel_init.c
+++ b/uboot2018.01/arch/arm/mach-exynos/lowlevel_init.c
@@ -218,12 +218,18 @@ int do_lowlevel_init(void)
#ifdef CONFIG_DEBUG_UART
#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL_SUPPORT)) || \
!defined(CONFIG_SPL_BUILD)
+#ifndef CONFIG_ITOP4412
exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
+#else
+ exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
+#endif
debug_uart_init();
#endif
#endif
mem_ctrl_init(actions & DO_MEM_RESET);
+#ifndef CONFIG_ITOP4412
tzpc_init();
+#endif
}
return actions & DO_WAKEUP;
diff --git a/uboot2018.01/arch/arm/mach-exynos/power.c b/uboot2018.01/arch/arm/mach-exynos/power.c
index c923460..7eeb304 100644
--- a/uboot2018.01/arch/arm/mach-exynos/power.c
+++ b/uboot2018.01/arch/arm/mach-exynos/power.c
@@ -163,6 +163,25 @@ static void exynos5_set_ps_hold_ctrl(void)
EXYNOS_PS_HOLD_CONTROL_DATA_HIGH);
}
+static void exynos4x12_set_ps_hold_ctrl(void)
+{
+ struct exynos4x12_power *power =
+ (struct exynos4x12_power *)samsung_get_base_power();
+
+ /* value: 1000000000B */
+ setbits_le32(&power->ps_hold_control, EXYNOS_PS_HOLD_CONTROL_DATA_HIGH);
+
+ /**
+ * GPX0PUD register
+ *
+ * 0x0 = Disables Pull-up/Pull-down
+ * 0x1 = Enables Pull-down
+ * 0x2 = Reserved
+ * 0x3 = Enables Pull-up
+ */
+ writel(0x3, (unsigned int *)0x11000c08);
+}
+
/*
* Set ps_hold data driving value high
* This enables the machine to stay powered on
@@ -173,6 +192,12 @@ void set_ps_hold_ctrl(void)
{
if (cpu_is_exynos5())
exynos5_set_ps_hold_ctrl();
+ else if(cpu_is_exynos4())
+ {
+#ifdef CONFIG_ITOP4412
+ exynos4x12_set_ps_hold_ctrl();
+#endif
+ }
}
diff --git a/uboot2018.01/arch/arm/mach-exynos/spl_boot.c b/uboot2018.01/arch/arm/mach-exynos/spl_boot.c
index 7df0102..d08628d 100644
--- a/uboot2018.01/arch/arm/mach-exynos/spl_boot.c
+++ b/uboot2018.01/arch/arm/mach-exynos/spl_boot.c
@@ -229,7 +229,9 @@ void copy_uboot_to_ram(void)
#ifdef CONFIG_SUPPORT_EMMC_BOOT
case BOOT_MODE_EMMC:
/* Set the FSYS1 clock divisor value for EMMC boot */
+#ifndef CONFIG_ITOP4412
emmc_boot_clk_div_set();
+#endif
copy_bl2_from_emmc = get_irom_func(EMMC44_INDEX);
end_bootop_from_emmc = get_irom_func(EMMC44_END_INDEX);
diff --git a/uboot2018.01/board/samsung/itop4412/Kconfig b/uboot2018.01/board/samsung/itop4412/Kconfig
new file mode 100644
index 0000000..8dfef9a
--- /dev/null
+++ b/uboot2018.01/board/samsung/itop4412/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_ITOP4412
+
+config SYS_BOARD
+ default "itop4412"
+
+config SYS_VENDOR
+ default "samsung"
+
+config SYS_CONFIG_NAME
+ default "itop4412"
+
+endif
diff --git a/uboot2018.01/board/samsung/itop4412/MAINTAINERS b/uboot2018.01/board/samsung/itop4412/MAINTAINERS
new file mode 100644
index 0000000..d2ecc08
--- /dev/null
+++ b/uboot2018.01/board/samsung/itop4412/MAINTAINERS
@@ -0,0 +1,6 @@
+ITOP4412 BOARD
+M: Chander Kashyap <k.chander@samsung.com>
+S: Maintained
+F: board/samsung/itop4412/
+F: include/configs/itop4412.h
+F: configs/itop4412_defconfig
diff --git a/uboot2018.01/board/samsung/itop4412/Makefile b/uboot2018.01/board/samsung/itop4412/Makefile
new file mode 100644
index 0000000..71187b4
--- /dev/null
+++ b/uboot2018.01/board/samsung/itop4412/Makefile
@@ -0,0 +1,22 @@
+#
+# Copyright (C) 2011 Samsung Electronics
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+ifdef CONFIG_SPL_BUILD
+# necessary to create built-in.o
+obj- := __dummy__.o
+
+hostprogs-y := tools/mkitop4412spl
+always := $(hostprogs-y)
+
+# omit -O2 option to suppress
+# warning: dereferencing type-punned pointer will break strict-aliasing rules
+#
+# TODO:
+# Fix the root cause in tools/mkitop4412spl.c and delete the following work-around
+$(obj)/tools/mkitop4412spl: HOSTCFLAGS:=$(filter-out -O2,$(HOSTCFLAGS))
+else
+obj-y += itop4412.o
+endif
diff --git a/uboot2018.01/board/samsung/itop4412/itop4412.c b/uboot2018.01/board/samsung/itop4412/itop4412.c
new file mode 100644
index 0000000..99a2fac
--- /dev/null
+++ b/uboot2018.01/board/samsung/itop4412/itop4412.c
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/periph.h>
+#include <asm/arch/pinmux.h>
+#include <usb.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+u32 get_board_rev(void)
+{
+ return 0;
+}
+
+int exynos_init(void)
+{
+ return 0;
+}
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+ return 0;
+}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int exynos_early_init_f(void)
+{
+ return 0;
+}
+#endif
diff --git a/uboot2018.01/board/samsung/itop4412/tools/mkitop4412spl.c b/uboot2018.01/board/samsung/itop4412/tools/mkitop4412spl.c
new file mode 100644
index 0000000..541d939
--- /dev/null
+++ b/uboot2018.01/board/samsung/itop4412/tools/mkitop4412spl.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <string.h>
+#include <sys/stat.h>
+
+#define BUFSIZE (16*1024)
+#define IMG_SIZE (14*1024) //16*1024
+#define SPL_HEADER_SIZE 0 //16
+#define FILE_PERM (S_IRUSR | S_IWUSR | S_IRGRP \
+ | S_IWGRP | S_IROTH | S_IWOTH)
+#define SPL_HEADER "S5PC210 HEADER "
+/*
+* Requirement:
+* IROM code reads first 14K bytes from boot device.
+* It then calculates the checksum of 14K-4 bytes and compare with data at
+* 14K-4 offset.
+*
+* This function takes two filenames:
+* IN "u-boot-spl.bin" and
+* OUT "$(BOARD)-spl.bin as filenames.
+* It reads the "u-boot-spl.bin" in 16K buffer.
+* It calculates checksum of 14K-4 Bytes and stores at 14K-4 offset in buffer.
+* It writes the buffer to "$(BOARD)-spl.bin" file.
+*/
+
+int main(int argc, char **argv)
+{
+ int i, len;
+ unsigned char buffer[BUFSIZE] = {0};
+ int ifd, ofd;
+ unsigned int checksum = 0, count;
+
+ if (argc != 3) {
+ printf(" %d Wrong number of arguments\n", argc);
+ exit(EXIT_FAILURE);
+ }
+
+ ifd = open(argv[1], O_RDONLY);
+ if (ifd < 0) {
+ fprintf(stderr, "%s: Can't open %s: %s\n",
+ argv[0], argv[1], strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ ofd = open(argv[2], O_WRONLY | O_CREAT | O_TRUNC, FILE_PERM);
+ if (ofd < 0) {
+ fprintf(stderr, "%s: Can't open %s: %s\n",
+ argv[0], argv[2], strerror(errno));
+ if (ifd)
+ close(ifd);
+ exit(EXIT_FAILURE);
+ }
+
+ len = lseek(ifd, 0, SEEK_END);
+ lseek(ifd, 0, SEEK_SET);
+
+ memcpy(&buffer[0], SPL_HEADER, SPL_HEADER_SIZE);
+
+ count = (len < (IMG_SIZE - SPL_HEADER_SIZE))
+ ? len : (IMG_SIZE - SPL_HEADER_SIZE);
+
+ if (read(ifd, buffer + SPL_HEADER_SIZE, count) != count) {
+ fprintf(stderr, "%s: Can't read %s: %s\n",
+ argv[0], argv[1], strerror(errno));
+
+ if (ifd)
+ close(ifd);
+ if (ofd)
+ close(ofd);
+
+ exit(EXIT_FAILURE);
+ }
+
+#if 0
+ for (i = 0; i < IMG_SIZE - SPL_HEADER_SIZE; i++)
+ checksum += buffer[i+16];
+
+ *(unsigned long *)buffer ^= 0x1f;
+ *(unsigned long *)(buffer+4) ^= checksum;
+
+ for (i = 1; i < SPL_HEADER_SIZE; i++)
+ buffer[i] ^= buffer[i-1];
+#endif
+
+ for (i = 0; i < IMG_SIZE - 4; i++)
+ checksum += (unsigned char)buffer[i];
+
+ *(unsigned int *)&buffer[i] = checksum;
+
+ if (write(ofd, buffer, BUFSIZE) != BUFSIZE) {
+ fprintf(stderr, "%s: Can't write %s: %s\n",
+ argv[0], argv[2], strerror(errno));
+
+ if (ifd)
+ close(ifd);
+ if (ofd)
+ close(ofd);
+
+ exit(EXIT_FAILURE);
+ }
+
+ if (ifd)
+ close(ifd);
+ if (ofd)
+ close(ofd);
+
+ return EXIT_SUCCESS;
+}
diff --git a/uboot2018.01/configs/itop4412_defconfig b/uboot2018.01/configs/itop4412_defconfig
new file mode 100644
index 0000000..05ec485
--- /dev/null
+++ b/uboot2018.01/configs/itop4412_defconfig
@@ -0,0 +1,56 @@
+CONFIG_ARM=y
+CONFIG_ARCH_EXYNOS=y
+CONFIG_ARCH_EXYNOS4=y
+CONFIG_TARGET_ITOP4412=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_IDENT_STRING=" for itop-4412"
+CONFIG_DEFAULT_DEVICE_TREE="exynos4412-itop4412"
+CONFIG_DEBUG_UART=y
+CONFIG_SD_BOOT=y
+CONFIG_BOOTDELAY=5
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_SPL=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="u-boot # "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_THOR_DOWNLOAD=y
+CONFIG_CMD_DFU=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_NET is not set
+CONFIG_CMD_DHCP=y
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_MII=y
+CONFIG_CMD_CACHE=y
+# CONFIG_CMD_MISC is not set
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_ISO_PARTITION=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_EMBED=y
+CONFIG_DFU_MMC=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_S5P=y
+CONFIG_DEBUG_UART_S5P=y
+CONFIG_DEBUG_UART_BASE=0x13820000
+CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Samsung"
+CONFIG_USB_GADGET_VENDOR_NUM=0x04e8
+CONFIG_USB_GADGET_PRODUCT_NUM=0x6601
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DOWNLOAD=y
diff --git a/uboot2018.01/include/configs/itop4412.h b/uboot2018.01/include/configs/itop4412.h
new file mode 100644
index 0000000..02a8b84
--- /dev/null
+++ b/uboot2018.01/include/configs/itop4412.h
@@ -0,0 +1,117 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG ITOP4412 (EXYNOS4412) board.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ITOP4412_H
+#define __CONFIG_ITOP4412_H
+
+#include <configs/exynos4-common.h>
+
+#define CONFIG_SUPPORT_EMMC_BOOT 1
+
+/* High Level Configuration Options */
+#define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */
+#define CONFIG_ITOP4412 1 /* working with ITOP4412*/
+
+#define CONFIG_SYS_DCACHE_OFF 1
+
+/* itop-4412 has 4 bank of DRAM */
+#define CONFIG_NR_DRAM_BANKS 4
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
+#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
+
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x00100000)
+
+#define CONFIG_SYS_TEXT_BASE 0x43E00000
+
+/* #define MACH_TYPE_ITOP4412 0xffffffff */
+#define CONFIG_MACH_TYPE MACH_TYPE_ITOP4412
+
+/* select serial console configuration */
+#define CONFIG_SERIAL2
+
+/* Console configuration */
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
+
+#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
+
+#define CONFIG_SYS_MONITOR_BASE 0x00000000
+
+/* Power Down Modes */
+#define S5P_CHECK_SLEEP 0x00000BAD
+#define S5P_CHECK_DIDLE 0xBAD00000
+#define S5P_CHECK_LPA 0xABAD0000
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+/* MMC SPL */
+#define COPY_BL2_FNPTR_ADDR 0x02020030
+#define CONFIG_SPL_TEXT_BASE 0x02023400 /* 0x02021410 */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=0x40007000\0" \
+ "rdaddr=0x48000000\0" \
+ "kerneladdr=0x40007000\0" \
+ "ramdiskaddr=0x48000000\0" \
+ "console=ttySAC2,115200n8\0" \
+ "mmcdev=0\0" \
+ "bootenv=uEnv.txt\0" \
+ "dtb_addr=0x41000000\0" \
+ "dtb_name=exynos4412-itop-4412.dtb\0" \
+ "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+ "bootargs=console=ttySAC2,115200n8 earlyprintk\0" \
+ "importbootenv=echo Importing environment from mmc ...; " \
+ "env import -t $loadaddr $filesize\0" \
+ "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+ "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
+ "source ${loadaddr}\0"
+#define CONFIG_BOOTCOMMAND \
+ "if mmc rescan; then " \
+ "echo SD/MMC found on device ${mmcdev};" \
+ "if run loadbootenv; then " \
+ "echo Loaded environment from ${bootenv};" \
+ "run importbootenv;" \
+ "fi;" \
+ "if test -n $uenvcmd; then " \
+ "echo Running uenvcmd ...;" \
+ "run uenvcmd;" \
+ "fi;" \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "fi; " \
+ "fi;" \
+ "mmc read ${loadaddr} 0x1000 0x4000; mmc read ${dtb_addr} 0x800 0xa0; bootm ${loadaddr} - ${dtb_addr}" \
+ "load mmc ${mmcdev} ${loadaddr} uImage; load mmc ${mmcdev} ${dtb_addr} ${dtb_name}; bootm ${loadaddr} - ${dtb_addr}"
+
+#define CONFIG_CLK_1000_400_200
+
+/* MIU (Memory Interleaving Unit) */
+#define CONFIG_MIU_2BIT_21_7_INTERLEAVED
+
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_SIZE (8 << 10) /* 16 KB */
+#define RESERVE_BLOCK_SIZE (512)
+#define BL1_SIZE (8 << 10) /*8 K reserved for BL1*/
+#define BL2_SIZE (16 << 10) /*16 K reserved for BL2 */
+#define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE + BL2_SIZE)
+
+#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
+
+#define CONFIG_SPL_STACK 0x02040000
+#define UBOOT_SIZE (2 << 20)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE+UBOOT_SIZE-0x1000)
+
+/* U-Boot copy size from boot Media to DRAM. */
+#define COPY_BL2_SIZE 0x80000
+#define BL2_START_OFFSET ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512)
+#define BL2_SIZE_BLOC_COUNT (COPY_BL2_SIZE/512)
+
+#endif /* __CONFIG_H */
--
2.11.0
EMMC启动
From 67680b0256da72a451781111c6a7bd833f527ebf Mon Sep 17 00:00:00 2001
From: "peter.hou" <kafka.hou@outlook.com>
Date: Sat, 17 Aug 2019 18:23:34 +0800
Subject: [PATCH 2/2] version : uboot2018.01-rc1 board :
itop4412-elite SCP 1G bootmedia : emmc
---
Scripts/mkuboot.sh | 8 ++-
uboot2018.01/arch/arm/mach-exynos/power.c | 5 ++
uboot2018.01/arch/arm/mach-exynos/spl_boot.c | 3 +-
uboot2018.01/board/samsung/itop4412/itop4412.c | 31 ++++++++-
uboot2018.01/configs/itop4412_defconfig | 42 ++++++++-----
uboot2018.01/drivers/usb/eth/dm9601.c | 0
uboot2018.01/drivers/usb/gadget/dwc2_udc_otg.c | 2 +-
uboot2018.01/include/configs/itop4412.h | 87 +++++++++++++-------------
8 files changed, 115 insertions(+), 63 deletions(-)
create mode 100644 uboot2018.01/drivers/usb/eth/dm9601.c
diff --git a/Scripts/mkuboot.sh b/Scripts/mkuboot.sh
index 60b919f..da272a6 100755
--- a/Scripts/mkuboot.sh
+++ b/Scripts/mkuboot.sh
@@ -10,7 +10,7 @@ if [ ! -f env.bin ] ; then
exit 0
fi
-cat E4412_N.bl1.bin itop4412-spl.bin env.bin u-boot.bin > u-boot-iTOP-4412.bin
+cat E4412_N.bl1.bin itop4412-spl.bin u-boot.bin > u-boot-iTOP-4412.bin
if [ -f u-boot-iTOP-4412.bin ] ; then
echo "created u-boot-iTOP-4412.bin success!!!"
@@ -19,10 +19,14 @@ else
exit 0
fi
+if [ -z $1 ] ; then
+ exit 0
+fi
+
echo "writting ..."
if [ -z $1 ] ; then
- dd iflag=dsync oflag=dsync if=u-boot-iTOP-4412.bin of=/dev/sdb seek=1
+ dd iflag=dsync oflag=dsync if=u-boot-iTOP-4412.bin of=/dev/sdc seek=1
else
dd iflag=dsync oflag=dsync if=u-boot-iTOP-4412.bin of=$1 seek=1
fi
diff --git a/uboot2018.01/arch/arm/mach-exynos/power.c b/uboot2018.01/arch/arm/mach-exynos/power.c
index 7eeb304..f37931d 100644
--- a/uboot2018.01/arch/arm/mach-exynos/power.c
+++ b/uboot2018.01/arch/arm/mach-exynos/power.c
@@ -239,8 +239,13 @@ static uint32_t exynos5_get_reset_status(void)
static uint32_t exynos4_get_reset_status(void)
{
+#ifndef CONFIG_ITOP4412
struct exynos4_power *power =
(struct exynos4_power *)samsung_get_base_power();
+#else
+ struct exynos4x12_power *power =
+ (struct exynos4x12_power *)samsung_get_base_power();
+#endif
return power->inform1;
}
diff --git a/uboot2018.01/arch/arm/mach-exynos/spl_boot.c b/uboot2018.01/arch/arm/mach-exynos/spl_boot.c
index d08628d..1e14d03 100644
--- a/uboot2018.01/arch/arm/mach-exynos/spl_boot.c
+++ b/uboot2018.01/arch/arm/mach-exynos/spl_boot.c
@@ -227,7 +227,8 @@ void copy_uboot_to_ram(void)
copy_bl2 = get_irom_func(MMC_INDEX);
break;
#ifdef CONFIG_SUPPORT_EMMC_BOOT
- case BOOT_MODE_EMMC:
+// case BOOT_MODE_EMMC:
+ case BOOT_MODE_EMMC_SD:
/* Set the FSYS1 clock divisor value for EMMC boot */
#ifndef CONFIG_ITOP4412
emmc_boot_clk_div_set();
diff --git a/uboot2018.01/board/samsung/itop4412/itop4412.c b/uboot2018.01/board/samsung/itop4412/itop4412.c
index 99a2fac..a8e57a4 100644
--- a/uboot2018.01/board/samsung/itop4412/itop4412.c
+++ b/uboot2018.01/board/samsung/itop4412/itop4412.c
@@ -12,6 +12,7 @@
#include <asm/arch/periph.h>
#include <asm/arch/pinmux.h>
#include <usb.h>
+#include <usb/dwc2_udc.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -25,11 +26,39 @@ int exynos_init(void)
return 0;
}
-int board_usb_init(int index, enum usb_init_type init)
+static int s5pc210_phy_control(int on)
{
return 0;
}
+struct dwc2_plat_otg_data s5pc210_otg_data = {
+ .phy_control = s5pc210_phy_control,
+ .regs_phy = EXYNOS4X12_USBPHY_BASE,
+ .regs_otg = EXYNOS4X12_USBOTG_BASE,
+ .usb_phy_ctrl = EXYNOS4X12_USBPHY_CONTROL,
+ .usb_flags = PHY0_SLEEP,
+};
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+ debug("USB_udc_probe\n");
+ return dwc2_udc_probe(&s5pc210_otg_data);
+}
+
+int g_dnl_board_usb_cable_connected(void)
+{
+#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
+ struct pmic *muic = pmic_get("MAX8997_MUIC");
+ if (!muic)
+ return 0;
+
+ return !!muic->chrg->chrg_type(muic);
+#else
+ return false;
+#endif
+
+}
+
#ifdef CONFIG_BOARD_EARLY_INIT_F
int exynos_early_init_f(void)
{
diff --git a/uboot2018.01/configs/itop4412_defconfig b/uboot2018.01/configs/itop4412_defconfig
index 05ec485..a032770 100644
--- a/uboot2018.01/configs/itop4412_defconfig
+++ b/uboot2018.01/configs/itop4412_defconfig
@@ -13,20 +13,28 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="u-boot # "
-CONFIG_CMD_BOOTZ=y
+CONFIG_SYS_PROMPT="==> "
+CONFIG_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x0
+CONFIG_FASTBOOT_BUF_SIZE=0x100000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_GPT_NAME=""
+CONFIG_FASTBOOT_MBR_NAME=""
+# CONFIG_CMD_GO is not set
# CONFIG_CMD_XIMG is not set
-CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_DFU=y
+# CONFIG_CMD_CRC32 is not set
+# CONFIG_CMD_MEMORY is not set
+# CONFIG_CMD_DM is not set
+# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPT=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
-CONFIG_CMD_PART=y
-CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_USB=y
# CONFIG_CMD_NET is not set
-CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
-CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
# CONFIG_CMD_MISC is not set
CONFIG_CMD_EXT2=y
@@ -34,23 +42,27 @@ CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
-CONFIG_ISO_PARTITION=y
+CONFIG_PARTITION_UUIDS=y
+CONFIG_SPL_PARTITION_UUIDS=y
CONFIG_OF_CONTROL=y
-CONFIG_OF_EMBED=y
-CONFIG_DFU_MMC=y
CONFIG_DM_MMC=y
CONFIG_MMC_DW=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_S5P=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_S5M8767=y
+CONFIG_DM_REGULATOR=y
+CONFIG_REGULATOR_S5M8767=y
CONFIG_DEBUG_UART_S5P=y
CONFIG_DEBUG_UART_BASE=0x13820000
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Samsung"
-CONFIG_USB_GADGET_VENDOR_NUM=0x04e8
-CONFIG_USB_GADGET_PRODUCT_NUM=0x6601
+CONFIG_USB_GADGET_VENDOR_NUM=0x18d1
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4e30
CONFIG_USB_GADGET_DWC2_OTG=y
-CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_ETHER=y
diff --git a/uboot2018.01/drivers/usb/eth/dm9601.c b/uboot2018.01/drivers/usb/eth/dm9601.c
new file mode 100644
index 0000000..e69de29
diff --git a/uboot2018.01/drivers/usb/gadget/dwc2_udc_otg.c b/uboot2018.01/drivers/usb/gadget/dwc2_udc_otg.c
index 088811c..825787a 100644
--- a/uboot2018.01/drivers/usb/gadget/dwc2_udc_otg.c
+++ b/uboot2018.01/drivers/usb/gadget/dwc2_udc_otg.c
@@ -43,7 +43,7 @@
#define DEBUG_SETUP 0
#define DEBUG_EP0 0
#define DEBUG_ISR 0
-#define DEBUG_OUT_EP 0
+#define DEBUG_OUT_EP 1
#define DEBUG_IN_EP 0
#include <usb/dwc2_udc.h>
diff --git a/uboot2018.01/include/configs/itop4412.h b/uboot2018.01/include/configs/itop4412.h
index 02a8b84..46b815a 100644
--- a/uboot2018.01/include/configs/itop4412.h
+++ b/uboot2018.01/include/configs/itop4412.h
@@ -17,7 +17,9 @@
#define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */
#define CONFIG_ITOP4412 1 /* working with ITOP4412*/
-#define CONFIG_SYS_DCACHE_OFF 1
+#define CONFIG_USB_EHCI_EXYNOS 1
+
+#define CONFIG_SYS_DCACHE_OFF 1
/* itop-4412 has 4 bank of DRAM */
#define CONFIG_NR_DRAM_BANKS 4
@@ -57,61 +59,60 @@
#define CONFIG_SPL_TEXT_BASE 0x02023400 /* 0x02021410 */
#define CONFIG_EXTRA_ENV_SETTINGS \
- "loadaddr=0x40007000\0" \
- "rdaddr=0x48000000\0" \
- "kerneladdr=0x40007000\0" \
- "ramdiskaddr=0x48000000\0" \
- "console=ttySAC2,115200n8\0" \
- "mmcdev=0\0" \
- "bootenv=uEnv.txt\0" \
- "dtb_addr=0x41000000\0" \
- "dtb_name=exynos4412-itop-4412.dtb\0" \
- "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
- "bootargs=console=ttySAC2,115200n8 earlyprintk\0" \
- "importbootenv=echo Importing environment from mmc ...; " \
- "env import -t $loadaddr $filesize\0" \
+ "loadaddr=0x40007000\0" \
+ "rdaddr=0x48000000\0" \
+ "kerneladdr=0x40007000\0" \
+ "ramdiskaddr=0x48000000\0" \
+ "console=ttySAC2,115200n8\0" \
+ "mmcdev=4\0" \
+ "bootenv=uEnv.txt\0" \
+ "dtb_addr=0x41000000\0" \
+ "dtb_name=exynos4412-itop.dtb\0" \
+ "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+ "bootargs=root=/dev/mmcblk1p2 rw console=ttySAC2,115200 init=/linuxrc earlyprintk\0" \
+ "importbootenv=echo Importing environment from mmc ...; " \
+ "env import -t $loadaddr $filesize\0" \
"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
"source ${loadaddr}\0"
#define CONFIG_BOOTCOMMAND \
- "if mmc rescan; then " \
- "echo SD/MMC found on device ${mmcdev};" \
- "if run loadbootenv; then " \
- "echo Loaded environment from ${bootenv};" \
- "run importbootenv;" \
- "fi;" \
- "if test -n $uenvcmd; then " \
- "echo Running uenvcmd ...;" \
- "run uenvcmd;" \
- "fi;" \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "fi; " \
- "fi;" \
- "mmc read ${loadaddr} 0x1000 0x4000; mmc read ${dtb_addr} 0x800 0xa0; bootm ${loadaddr} - ${dtb_addr}" \
- "load mmc ${mmcdev} ${loadaddr} uImage; load mmc ${mmcdev} ${dtb_addr} ${dtb_name}; bootm ${loadaddr} - ${dtb_addr}"
+ "if mmc rescan; then " \
+ "echo SD/MMC found on device ${mmcdev};" \
+ "if run loadbootenv; then " \
+ "echo Loaded environment from ${bootenv};" \
+ "run importbootenv;" \
+ "fi;" \
+ "if test -n $uenvcmd; then " \
+ "echo Running uenvcmd ...;" \
+ "run uenvcmd;" \
+ "fi;" \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "fi; " \
+ "fi;" \
+ "load mmc ${mmcdev} ${loadaddr} uImage; load mmc ${mmcdev} ${dtb_addr} ${dtb_name}; bootm ${loadaddr} - ${dtb_addr}"
#define CONFIG_CLK_1000_400_200
/* MIU (Memory Interleaving Unit) */
#define CONFIG_MIU_2BIT_21_7_INTERLEAVED
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#define CONFIG_ENV_SIZE (8 << 10) /* 16 KB */
-#define RESERVE_BLOCK_SIZE (512)
-#define BL1_SIZE (8 << 10) /*8 K reserved for BL1*/
-#define BL2_SIZE (16 << 10) /*16 K reserved for BL2 */
-#define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE + BL2_SIZE)
+#define CONFIG_SYS_MMC_ENV_DEV 4
+#define CONFIG_ENV_SIZE (8 << 10) /* 8 KB */
+#define RESERVE_BLOCK_SIZE (512)
+#define BL1_SIZE (8 << 10) /* 8 K reserved for BL1 */
+#define BL2_SIZE (16 << 10) /* 16 K reserved for BL2 */
+#define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE + BL2_SIZE + COPY_BL2_SIZE)
-#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
+#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
-#define CONFIG_SPL_STACK 0x02040000
-#define UBOOT_SIZE (2 << 20)
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE+UBOOT_SIZE-0x1000)
+#define CONFIG_SPL_STACK 0x02040000
+#define UBOOT_SIZE (2 << 20)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + UBOOT_SIZE - 0x1000)
/* U-Boot copy size from boot Media to DRAM. */
-#define COPY_BL2_SIZE 0x80000
-#define BL2_START_OFFSET ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512)
-#define BL2_SIZE_BLOC_COUNT (COPY_BL2_SIZE/512)
+#define COPY_BL2_SIZE 0x60000
+#define BL2_START_OFFSET ((RESERVE_BLOCK_SIZE + BL1_SIZE + BL2_SIZE)/512)
+#define BL2_SIZE_BLOC_COUNT (COPY_BL2_SIZE / 512)
#endif /* __CONFIG_H */
--
2.11.0
Running是OK的，但是从启动日志上看还是有许多问题，接下来去分析uboot启动流程的时候在一一解决吧！
网友评论