Job for network.service failed because the control process exited with error code

网上最常见的几种做法如下：

1

和 NetworkManager 服务有冲突，这个好解决，直接关闭 NetworkManger 服务就好了， service NetworkManager stop，并且禁止开机启动 chkconfig NetworkManager off 。之后重启就好了。

2

和配置文件的MAC地址不匹配，这个也好解决，使用ip addr（或ifconfig）查看mac地址
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:b8:e7:21 brd ff:ff:ff:ff:ff:ff
inet 192.168.65.141/24 brd 192.168.65.255 scope global dynamic ens33
valid_lft 1193sec preferred_lft 1193sec
inet6 fe80::cca2:d835:f93:e637/64 scope link
valid_lft forever preferred_lft forever
00:0c:29:b8:e7:21这个就是MAC地址了，将/etc/sysconfig/network-scripts/ifcfg-xxx中的HWADDR（如果没有就添加上）改成这个MAC地址

3

设定开机启动一个名为NetworkManager-wait-online服务，命令为：
systemctl enable NetworkManager-wait-online.service

原文链接：https://blog.csdn.net/weiyongle1996/article/details/75128239