美文网首页
Learning KVM - part3 配置KVM存储共享池

Learning KVM - part3 配置KVM存储共享池

作者: drfung | 来源:发表于2017-06-08 20:46 被阅读259次

    上一章节我们安装了KVM和KVM管理工具，接下来我们配置KVM宿主机（hosts）为虚拟机（guests）提供网络以及存储资源。
    KVM安装完成后默认会虚拟机（guests）创建文件系统/var/lib/libvirt/images，如果您打算在宿主机（hosts）之间迁移VM（guests）的话，你需要配置共享存储，例如NFS、NAS或Ceph等。
    同时你必须配置网桥，以便VM能够与外部通讯。接下来我们将描述如何配置网桥以及如何为VM及镜像创建存储资源池。

    如何配置网桥

    如果您发现您的机器上有"virbr0"网卡，您可以使用命令virsh net-destroy default去删除它或者选择忽略，这个网卡是KVM安装时自动创建的NAT网卡。
    下面我们来手动配置网桥桥接到网卡"eth1",步骤如下：

    1. 登录到宿主机，检查网络配置； 
      [root@localhost ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:f5:9f:b2 brd ff:ff:ff:ff:ff:ff
    inet 192.168.88.144/24 brd 192.168.88.255 scope global dynamic eth0
       valid_lft 1248sec preferred_lft 1248sec
    inet6 fe80::ec2f:eb00:c9f6:4250/64 scope link
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:f5:9f:bc brd ff:ff:ff:ff:ff:ff
    inet 192.168.57.254/24 brd 192.168.57.255 scope global eth1
       valid_lft forever preferred_lft forever
    inet6 fe80::e096:d49b:5afe:d1ca/64 scope link
       valid_lft forever preferred_lft forever
    2. 配置网卡"eth1"桥接网桥； 
      [root@localhost ~]# vi /etc/sysconfig/network-scripts/ifcfg-eth1
[root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
TYPE=Ethernet
BOOTPROTO=static
IPV4_FAILURE_FATAL=no
NAME=eth1
DEVICE=eth1
ONBOOT=yes
BRIDGE=br0
    3. 创建网桥"br0"的配置文件； 
      [root@localhost ~]# vi /etc/sysconfig/network-scripts/ifcfg-br0
[root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-br0
TYPE="Bridge"
DEVICE=br0
BOOTPROTO=static
IPADDR=192.168.57.254
NETMASK=255.255.255.0
ONBOOT="yes"
DELAY=0
STP=0
    4. 开启ipv4路由转发功能； 
      [root@localhost ~]# grep "net.ipv4.ip_forward" /etc/sysctl.conf || echo "net.ipv4.ip_forward=1" >> /etc/sysctl.conf
[root@localhost ~]# sysctl -p
net.ipv4.ip_forward = 1
    5. 重启网络服使网桥"br0"配置生效； 
      [root@localhost ~]# systemctl network restart
Unknown operation 'network'.
[root@localhost ~]# systemctl restart network
[root@localhost ~]# systemctl status network
● network.service - LSB: Bring up/down networking
   Loaded: loaded (/etc/rc.d/init.d/network; bad; vendor preset: disabled)
   Active: active (exited) since Thu 2017-06-08 14:37:50 CST; 6s ago
     Docs: man:systemd-sysv-generator(8)
  Process: 6568 ExecStop=/etc/rc.d/init.d/network stop (code=exited, status=0/SUCCESS)
  Process: 6793 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=0/SUCCESS)

Jun 08 14:37:49 localhost.localdomain systemd[1]: Starting LSB: Bring up/down networking...
Jun 08 14:37:49 localhost.localdomain network[6793]: Bringing up loopback interface:  [  OK  ]
Jun 08 14:37:50 localhost.localdomain network[6793]: Bringing up interface eth0:  Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/3)
Jun 08 14:37:50 localhost.localdomain network[6793]: [  OK  ]
Jun 08 14:37:50 localhost.localdomain network[6793]: Bringing up interface eth1:  Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/4)
Jun 08 14:37:50 localhost.localdomain network[6793]: [  OK  ]
Jun 08 14:37:50 localhost.localdomain network[6793]: Bringing up interface br0:  [  OK  ]
Jun 08 14:37:50 localhost.localdomain systemd[1]: Started LSB: Bring up/down networking.
[root@localhost ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:f5:9f:b2 brd ff:ff:ff:ff:ff:ff
    inet 192.168.88.144/24 brd 192.168.88.255 scope global dynamic eth0
       valid_lft 1786sec preferred_lft 1786sec
    inet6 fe80::ec2f:eb00:c9f6:4250/64 scope link
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0 state UP qlen 1000
    link/ether 00:0c:29:f5:9f:bc brd ff:ff:ff:ff:ff:ff
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000
    link/ether 00:0c:29:f5:9f:bc brd ff:ff:ff:ff:ff:ff
    inet 192.168.57.254/24 brd 192.168.57.255 scope global br0
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fef5:9fbc/64 scope link
       valid_lft forever preferred_lft forever
    6. 检查网桥信息,看上去“br0”已经桥接到“eth1”了； 
      [root@localhost ~]# brctl show
bridge name bridge id       STP enabled interfaces
br0     8000.000c29f59fbc   no      eth1

    配置存储资源池

    KVM默认的存储资源池的路径为/var/lib/libvirt/images。
    用户没有强要求使用共享存储来存储镜像（images），配置共享存储能够很方便实现在宿主机之间迁移vm的功能，KVM已经支持vm热迁移功能，这点类似于VMware的vmotion功能。
    KVM支持多种共享存储做为存储资源池。
    本章我们使用NFS，首先我们来搭建一个NFS环境。

    NFS环境搭搭建

    # 安装nfs rpm包
[root@nfs-server ~]# yum install -y nfs-utils
# 配置共享目录，允许本网段访问
[root@nfs-server ~]# mkdir /images
[root@nfs-server ~]# echo -e "/images\t192.168.57.0/24(rw,no_root_squash)" > /etc/exports
# 启动NFS服务
[root@nfs-server ~]# systemctl enable rpcbind nfs-server
Created symlink from /etc/systemd/system/multi-user.target.wants/nfs-server.service to /usr/lib/systemd/system/nfs-server.service.
[root@nfs-server ~]# systemctl start rpcbind nfs-server
[root@nfs-server ~]# systemctl status rpcbind nfs-server
● rpcbind.service - RPC bind service
   Loaded: loaded (/usr/lib/systemd/system/rpcbind.service; indirect; vendor preset: enabled)
   Active: active (running) since Thu 2017-06-08 15:38:46 CST; 15s ago
  Process: 3461 ExecStart=/sbin/rpcbind -w $RPCBIND_ARGS (code=exited, status=0/SUCCESS)
 Main PID: 3467 (rpcbind)
   CGroup: /system.slice/rpcbind.service
           └─3467 /sbin/rpcbind -w

Jun 08 15:38:46 nfs-server systemd[1]: Starting RPC bind service...
Jun 08 15:38:46 nfs-server systemd[1]: Started RPC bind service.

● nfs-server.service - NFS server and services
   Loaded: loaded (/usr/lib/systemd/system/nfs-server.service; enabled; vendor preset: disabled)
   Active: active (exited) since Thu 2017-06-08 15:38:57 CST; 5s ago
  Process: 3473 ExecStart=/usr/sbin/rpc.nfsd $RPCNFSDARGS (code=exited, status=0/SUCCESS)
  Process: 3472 ExecStartPre=/usr/sbin/exportfs -r (code=exited, status=0/SUCCESS)
 Main PID: 3473 (code=exited, status=0/SUCCESS)
   CGroup: /system.slice/nfs-server.service

Jun 08 15:38:57 nfs-server systemd[1]: Starting NFS server and services...
Jun 08 15:38:57 nfs-server systemd[1]: Started NFS server and services.
# 放通防火墙
[root@nfs-server ~]# firewall-cmd --add-service=nfs --permanent
success
[root@nfs-server ~]# firewall-cmd --reload
success

    KVM存储池配置

    1. 配置KVM宿主机连接NFS Server.

      [root@kvm-node1 ~]# yum install nfs-utils -y
[root@kvm-node1 ~]# systemctl enable rpcbind && systemctl start rpcbind
[root@kvm-node1 ~]# systemctl status rpcbind
● rpcbind.service - RPC bind service
   Loaded: loaded (/usr/lib/systemd/system/rpcbind.service; indirect; vendor preset: enabled)
   Active: active (running) since Thu 2017-06-08 15:56:56 CST; 16s ago
  Process: 8744 ExecStart=/sbin/rpcbind -w $RPCBIND_ARGS (code=exited, status=0/SUCCESS)
 Main PID: 8745 (rpcbind)
   CGroup: /system.slice/rpcbind.service
           └─8745 /sbin/rpcbind -w
Jun 08 15:56:56 kvm-node1 systemd[1]: Starting RPC bind service...
Jun 08 15:56:56 kvm-node1 systemd[1]: Started RPC bind service.
[root@kvm-node1 ~]# mount -t nfs 192.168.57.200:/images /var/lib/libvirt/images
[root@kvm-node1 ~]# df -hT
Filesystem             Type      Size  Used Avail Use% Mounted on
/dev/mapper/cl-root    xfs        17G  4.2G   13G  25% /
devtmpfs               devtmpfs  478M     0  478M   0% /dev
tmpfs                  tmpfs     489M   88K  489M   1% /dev/shm
tmpfs                  tmpfs     489M  7.1M  482M   2% /run
tmpfs                  tmpfs     489M     0  489M   0% /sys/fs/cgroup
/dev/sda1              xfs      1014M  140M  875M  14% /boot
tmpfs                  tmpfs      98M  8.0K   98M   1% /run/user/0
192.168.57.200:/images nfs4       17G  4.2G   13G  25% /var/lib/libvirt/images
[root@kvm-node1 ~]# echo -e "192.168.57.200:/images\t/var/lib/libvirt/images\tnfs\tdefaults\t0\t0" >> /etc/fstab

    2. 配置KVM存储资源池

      [root@kvm-node1 ~]# virsh pool-list
 Name                 State      Autostart
-------------------------------------------

[root@kvm-node1 ~]# virsh pool-build default
Pool default built

[root@kvm-node1 ~]# virsh pool-start default
Pool default started

[root@kvm-node1 ~]# virsh pool-list
 Name                 State      Autostart
-------------------------------------------
 default              active     yes

[root@kvm-node1 ~]# virsh pool-info default
Name:           default
UUID:           d84dc74b-b0f4-4197-92b0-d9025620f0a4
State:          running
Persistent:     yes
Autostart:      yes
Capacity:       16.99 GiB
Allocation:     4.10 GiB
Available:      12.88 GiB

[root@kvm-node1 ~]# df -Th /var/lib/libvirt/images/
Filesystem             Type  Size  Used Avail Use% Mounted on
192.168.57.200:/images nfs4   17G  4.2G   13G  25% /var/lib/libvirt/images

    相关文章

      网友评论

          本文标题：Learning KVM - part3 配置KVM存储共享池

          本文链接：https://www.haomeiwen.com/subject/qnltqxtx.html

          延伸阅读

          深度阅读

          • 您也可以注册成为美文阅读网的作者，发表您的原创作品、分享您的心情！

          栏目导航

          热点阅读

          关于我们|服务条款|联系我们|Learning KVM - part3 配置KVM存储共享池|投稿指南|网站地图|RSS订阅|排版工具|手机版

          提供经典美文摘抄,优美散文欣赏,现代诗歌精选,短篇小说,心情随笔,表白情书范文,故事会在线阅读欣赏

          Copyright © 2014-2023 Haomeiwen.com All Rights Reserved. 好美文阅读网 版权所有

          备案信息：桂公网安备 45052102000051号 · 桂ICP备13007215号-3

          本站所收录作品、热点评论等信息部分来源互联网，目的只是为了系统归纳学习和传递资讯

          所有作品版权归原创作者所有，与本站立场无关，如不慎侵犯了你的权益，请联系我们告知，我们将做删除处理！