DCN无线AP与WS二次发现

实验拓补图

下面是Vlan列表

Vlan10    172.16.10.254/24
Vlan 20    172.16.20.254/24
Vlan 101    172.16.101.254/24

首先修改AP上的IP及子网掩码等信息.

DCN-AP# set management static-ip 172.16.101.253
// 静态IP
DCN-AP# set management static-mask 255.255.255.0
// 配置子网掩码
DCN-AP# set management  dhcp-status down
// 关闭自动获取静态IP
DCN-AP# set static-ip-route gateway 172.16.101.254
// 配置网关
DCN-AP# set management vlan-id 101
// 配置AP接口管理Vlan为101

然后配置DCWS

DCN-DCWS> enable
DCN-DCWS# config
DCN-DCWS(config)# vlan 10,20,101
DCN-DCWS(config)# int vlan 10
DCN-DCWS(config_vlan_10)# ip address 172.16.10.1
DCN-DCWS(config)# int vlan 20
DCN-DCWS(config_vlan_20)# ip address 172.16.20.1
DCN-DCWS(config)# int vlan 101
DCN-DCWS(config_vlan_101)# ip address 172.16.101.1
DCN-DCWS(config)# int e1/0/24
DCN-DCWS(config_e1/0/24)# switchport mode trunk
DCN-DCWS(config_e1/0/1)# switchport mode trunk
DCN-DCWS(config_e1/0/1)# switchport trunk native vlan 101

然后在登陆Web界面进行配置，并查看是否配置到AP（其显示配置失败看下方指令）

DCN-WLAN-AP# get system device-type //显示无线AP的型号编号
29
DCN-WLAN-AP# 

DCWS-6028(config)#wireless
DCWS-6028(config-wireless)#ap profile 1 //配置AP组1
DCWS-6028(config-ap-profile)#hwtype 29  //设置AP组的型号编号为29 
DCWS-6028#wireless ap profile apply 1   //然后推送AP组1的配置到AP