Nginx+Keepalived主从模式-负载均衡高可用

作者: 皇阿玛PLUS | 来源:发表于2017-03-28 12:03 被阅读949次

  [root@example01 ~]# vim /etc/sysconfig/iptables
  -A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT
  # 允许VRRP（虚拟路由冗余协议）通信
  -A INPUT -p vrrp -d -j ACCEPT
  # 允许Keepalived虚拟路由组播地址通信
  -A INPUT -d 224.0.0.18 -j ACCEPT


  [root@example01 ~]# service iptables restart
  iptables: Applying firewall rules:                         [  OK  ]

1.3 安装wget

  [root@example01 ~]# yum -y install wget

准备工作到此为止，reboot命令，重启两台服务器，使得SELinux配置生效

2.部署nginx

2.1 安装编译工具及库文件

  [root@example01 ~]# yum -y install gcc gcc-c++ make automake autoconf libtool pcre pcre-devel zlib zlib-devel openssl openssl-devel

2.2 安装nginx

  [root@example01 ~]# cd /usr/local/src/
  [root@example01 src]# wget http://nginx.org/download/nginx-1.6.2.tar.gz
  [root@example01 src]# tar -zxvf nginx-1.6.2.tar.gz 
  [root@example01 src]# cd nginx-1.6.2
  [root@example01 nginx-1.6.2]# ./configure --prefix=/usr/local/nginx \
  --with-http_stub_status_module \
  --with-http_ssl_module
  [root@example01 nginx-1.6.2]# make && make install

配置报错：
./configure: error: the HTTP rewrite module requires the PCRE library.
You can either disable the module by using --without-http_rewrite_module
option, or install the PCRE library into the system, or build the PCRE library
statically from the source with nginx by using --with-pcre=<path> option.

解决办法：

  [root@example01 nginx-1.6.2]# ./configure --prefix=/usr/local/nginx \
  > --without-http_rewrite_module

2.3 配置nginx

2.3.1 创建nginx运行使用的用户www

  [root@example01 nginx-1.6.2]# /usr/sbin/groupadd www
  [root@example01 nginx-1.6.2]# /usr/sbin/useradd -g www www

2.3.2 启动nginx

启动服务

  [root@example01 nginx-1.6.2]# /usr/local/nginx/sbin/nginx

重载nginx配置

  [root@example01 nginx-1.6.2]# /usr/local/nginx/sbin/nginx -s reload

开机启动

  [root@example01 src]# vim /etc/rc.local 
  # Nginx
  /usr/local/nginx/sbin/nginx

2.3.3 编辑index.html文件

编辑LB-01:192.168.1.191

  [root@example01 nginx-1.6.2]# vim /usr/local/nginx/html/index.html 
   14 <h1>Welcome to nginx!Server01</h1>

编辑LB-02:192.168.1.192

  [root@example02 nginx-1.6.2]# vim /usr/local/nginx/html/index.html 
   14 <h1>Welcome to nginx!Server02</h1>

2.3.4 配置nginx.conf

    2 user  www www;
    3 worker_processes  1;

   35    upstream my Server {
   36        ip_hash;

   37         server 192.168.1.191:80;
   38         server 192.168.1.192:80;
   39     }

Tips：

负载均衡模块用于从”upstream”指令定义的后端主机列表中选取一台主机。nginx先使用负载均衡模块找到一台主机，再使用upstream模块实现与这台主机的交互。
从配置我们可以看出负载均衡模块的使用场景：
- 1.核心指令”ip_hash”只能在upstream {}中使用。这条指令用于通知nginx使用ip hash负载均衡算法。如果没加这条指令，nginx会使用默认的round robin负载均衡模块。
- 2.upstream {}中的指令可能出现在”server”指令前，可能出现在”server”指令后，也可能出现在两条”server”指令之间。

2.3.5 浏览器访问：

http://192.168.1.191

LB-01:192.168.1.191

http://192.168.1.192

LB-02:192.168.1.192

nginx其它命令：

  /usr/local/nginx/sbin/nginx -s reload            # 重新载入配置文件
  /usr/local/nginx/sbin/nginx -s reopen            # 重启 Nginx
  /usr/local/nginx/sbin/nginx -s stop              # 停止 Nginx

3.部署keepalived

3.1 安装keepalived

  [root@example01 src]# yum -y install keepalived

查看keepalived版本

  [root@example01 src]# keepalived -v
  Keepalived v1.2.13 (03/19,2015)

3.2 修改keepalived的配置文件

LB-01:192.168.1.191的配置

  [root@example01 src]# vim /etc/keepalived/keepalived.conf
  vrrp_script chk_nginx {
     script "/etc/keepalived/nginx_check.sh"    # 检测nginx状态的脚本路径
     interval 2                 # 检测时间间隔2s
     weight -20                 # 如果脚本的条件成立，权重-20
  }

  vrrp_instance VI_1 {
      state MASTER              # 服务状态；MASTER（工作状态）BACKUP（备用状态）
      interface eth0              # VIP绑定网卡
      virtual_router_id 51      # 虚拟路由ID，主、备节点必须一致
      mcast_src_ip 192.168.1.191  # 本机IP
      nopreempt                # 优先级高的设置，解决异常回复后再次抢占的问题
      priority 100              # 优先级；取值范围：0~254；MASTER > BACKUP
      advert_int 1              # 组播信息发送间隔，主、备节点必须一致，默认1s
      authentication {          # 验证信息；主、备节点必须一致
          auth_type PASS          # VRRP验证类型，PASS、AH两种
          auth_pass 1111          # VRRP验证密码，在同一个vrrp_instance下，主、从必须使用相同的密码才能正常通信
      }
    track_script {           # 将track_script块加入instance配置块
          chk_nginx         # 执行Nginx监控的服务
      }
      virtual_ipaddress {         # 虚拟IP池，主、备节点必须一致，可以定义多个VIP
          192.168.1.99          # 虚拟IP
      }
  }

LB-02:192.168.1.192的配置

  [root@example02 src]# vim /etc/keepalived/keepalived.conf
  vrrp_script chk_nginx {
     script "/etc/keepalived/nginx_check.sh"
     interval 2
     weight -20
  }

  vrrp_instance VI_1 {
      state BACKUP
      interface eth0
      virtual_router_id 51
      mcast_src_ip 192.168.1.192
      priority 90
      advert_int 1
      authentication {
          auth_type PASS
          auth_pass 1111
      }
      track_script {
          chk_nginx
      }
      virtual_ipaddress {
          192.168.1.99
      }   
  }

3.3 编写nginx状态监测脚本

  [root@example01 keepalived]# vim /etc/keepalived/nginx_check.sh
  #!/bin/bash
  A=`ps -C nginx –no-header |wc -l`
  if [ $A -eq 0 ];then
          /usr/local/nginx/sbin/nginx
          sleep 2
          if [ `ps -C nginx --no-header |wc -l` -eq 0 ];then
                  killall keepalived
          fi
  fi

脚本要求：如果 nginx 停止运行，尝试启动，如果无法启动则杀死本机的 keepalived 进程， keepalied将虚拟 ip 绑定到 BACKUP 机器上。

3.4 保存脚本，赋予执行权限

  [root@example01 keepalived]# chmod +x /etc/keepalived/nginx_check.sh 
  [root@example01 keepalived]# ll
  total 8
  -rw-r--r--. 1 root root 3602 Mar 27 23:46 keepalived.conf
  -rwxr-xr-x. 1 root root  191 Mar 27 23:53 nginx_check.sh

3.5 启动keepalived

开机启动

  [root@example02 src]# chkconfig keepalived on

启动服务

  [root@example01 keepalived]# service keepalived start
  Starting keepalived:                                       [  OK  ]

4.keepalived+nginx的高可用测试

4.1 查看服务器上的地址

查看MASTER的地址：

  [root@example01 keepalived]# ip add
  1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
      link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
      inet 127.0.0.1/8 scope host lo
      inet6 ::1/128 scope host 
         valid_lft forever preferred_lft forever
  2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
      link/ether 00:0c:29:37:2c:86 brd ff:ff:ff:ff:ff:ff
      inet 192.168.1.191/24 brd 192.168.1.255 scope global eth0
      inet 192.168.1.99/32 scope global eth0                    # 注意，此时MASTER上存在一个VIP
      inet6 fe80::20c:29ff:fe37:2c86/64 scope link 
         valid_lft forever preferred_lft forever

查看BACKUP的地址：

  [root@example02 src]# ip add
  1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
      link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
      inet 127.0.0.1/8 scope host lo
      inet6 ::1/128 scope host 
         valid_lft forever preferred_lft forever
  2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
      link/ether 00:0c:29:5b:9e:6b brd ff:ff:ff:ff:ff:ff
      inet 192.168.1.192/24 brd 192.168.1.255 scope global eth0
      inet6 fe80::20c:29ff:fe5b:9e6b/64 scope link 
         valid_lft forever preferred_lft forever

4.2 关闭MASTER上的nginx，keepalived会将它重新启动

  [root@example01 keepalived]# /usr/local/nginx/sbin/nginx -s stop

4.3 关闭MASTER上的keepalived，VIP会切换到BACKUP上

  [root@example01 keepalived]# service keepalived stop
  Stopping keepalived:                                       [  OK  ]

4.4 验证VIP的漂移

验证方法1：通过ip add查看VIP的漂移

  [root@example01 keepalived]# ip add
  1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
      link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
      inet 127.0.0.1/8 scope host lo
      inet6 ::1/128 scope host 
         valid_lft forever preferred_lft forever
  2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
      link/ether 00:0c:29:37:2c:86 brd ff:ff:ff:ff:ff:ff
      inet 192.168.1.191/24 brd 192.168.1.255 scope global eth0
      inet6 fe80::20c:29ff:fe37:2c86/64 scope link 
         valid_lft forever preferred_lft forever


  [root@example02 src]# ip add
  1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
      link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
      inet 127.0.0.1/8 scope host lo
      inet6 ::1/128 scope host 
         valid_lft forever preferred_lft forever
  2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
      link/ether 00:0c:29:5b:9e:6b brd ff:ff:ff:ff:ff:ff
      inet 192.168.1.192/24 brd 192.168.1.255 scope global eth0
      inet 192.168.1.99/32 scope global eth0                    # 注意，此时存在一个VIP
      inet6 fe80::20c:29ff:fe5b:9e6b/64 scope link 
         valid_lft forever preferred_lft forever

验证方法2：通过浏览器访问VIP

浏览器访问：http://192.168.1.99
刷新页面，显示“Welcome to nginx!Server02”，表示已经VIP已经漂移到了BACKUP服务器上

高可用

到这里，整个部署就已经完成了！

Tips:

在上面的部署过程中，为了节省篇幅，只显示了LB-01:192.168.1.191上的部署过程。新手请注意，按照部署过程，凡是在LB-01:192.168.1.191上做的所有配置（准备工作、部署Nginx、部署Keepalived），都需要在LB-02:192.168.1.192上，再部署一次，并保持两边的配置过程一样！

Nginx+Keepalived主从模式-负载均衡高可用

目录

简介

1.准备工作

2.部署Nginx

3.部署Keepalived

4.Nginx+Keepalived的高可用测试

简介

关于Nginx版本

规划：

架构图：