美文网首页
解读默认的i3配置文件,会用英文词典即可,如果你不愿意花时间看代

解读默认的i3配置文件,会用英文词典即可,如果你不愿意花时间看代

作者: blackarch | 来源:发表于2019-11-09 10:20 被阅读0次

#i3 config file (v4)

#

# Please see https://i3wm.org/docs/userguide.html for a complete reference!

#

# This config file uses keycodes (bindsym) and was written for the QWERTY

# layout.

#

# To get a config file with the same key positions, but for your current

# layout, use the i3-config-wizard

# $modkey for ALT and Mod4 for Winkey

set $modkey Mod4

# Font for window titles. Will also be used by the bar unless a different font

# is used in the bar {} block below.

font pango: Terminus (TTF) bold 10

# This font is widely installed, provides lots of unicode glyphs, right-to-left

# text rendering and scalability on retina/hidpi displays (thanks to pango).

#font pango:DejaVu Sans Mono 8

# Before i3 v4.8, we used to recommend this one as the default:

# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1

# The font above is very space-efficient, that is, it looks good, sharp and

# clear in small sizes. However, its unicode glyph coverage is limited, the old

# X core fonts rendering does not support right-to-left and this being a bitmap

# font, it doesn't scale on retina/hidpi displays.

# use these keys for focus, movement, and resize directions when reaching for

# the arrows is not convenient

set $up l

set $down k

set $left j

set $right semicolon

# use Mouse+$modkey to drag floating windows to their wanted position

floating_modifier $modkey

# start a terminal

bindsym $modkey+Return exec --no-startup-id i3-sensible-terminal

# kill focused window

bindsym $modkey+Shift+q kill

# start dmenu (a program launcher)

bindsym $modkey+d exec --no-startup-id rofi -show run

# bindsym $modkey+d exec --no-startup-id dmenu_run

# There also is the (new) i3-dmenu-desktop which only displays applications

# shipping a .desktop file. It is a wrapper around dmenu, so you need that

# installed.

# bindsym $modkey+d exec --no-startup-id --no-startup-id i3-dmenu-desktop

# change focus

bindsym $modkey+$left focus left

bindsym $modkey+$down focus down

bindsym $modkey+$up focus up

bindsym $modkey+$right focus right

# alternatively, you can use the cursor keys:

bindsym $modkey+Left focus left

bindsym $modkey+Down focus down

bindsym $modkey+Up focus up

bindsym $modkey+Right focus right

# move focused window

bindsym $modkey+Shift+$left move left

bindsym $modkey+Shift+$down move down

bindsym $modkey+Shift+$up move up

bindsym $modkey+Shift+$right move right

# alternatively, you can use the cursor keys:

bindsym $modkey+Shift+Left move left

bindsym $modkey+Shift+Down move down

bindsym $modkey+Shift+Up move up

bindsym $modkey+Shift+Right move right

# split in horizontal orientation

bindsym $modkey+h split h

# split in vertical orientation

bindsym $modkey+v split v

# enter fullscreen mode for the focused container

bindsym $modkey+f fullscreen toggle

# change container layout (stacked, tabbed, toggle split)

bindsym $modkey+s layout stacking

bindsym $modkey+w layout tabbed

bindsym $modkey+e layout toggle split

# toggle tiling / floating

bindsym $modkey+Shift+space floating toggle

# change focus between tiling / floating windows

bindsym $modkey+space focus mode_toggle

# focus the parent container

bindsym $modkey+a focus parent

# focus the child container

#bindsym $modkey+d focus child

# move the currently focused window to the scratchpad

bindsym $modkey+Shift+minus move scratchpad

# Show the next scratchpad window or hide the focused scratchpad window.

# If there are multiple scratchpad windows, this command cycles through them.

bindsym $modkey+minus scratchpad show

# Enable the setion below to fetch all the colors from Xresources

#set_from_resource $xforeground foreground

#set_from_resource $xbackground background

#set_from_resource $xcursor cursorColor

#set_from_resource $xcolor0 color0

#set_from_resource $xcolor8 color8

#set_from_resource $xcolor1 color1

#set_from_resource $xcolor9 color9

#set_from_resource $xcolor2 color2

#set_from_resource $xcolor10 color10

#set_from_resource $xcolor3 color3

#set_from_resource $xcolor11 color11

#set_from_resource $xcolor4 color4

#set_from_resource $xcolor12 color12

#set_from_resource $xcolor5 color5

#set_from_resource $xcolor13 color13

#set_from_resource $xcolor6 color6

#set_from_resource $xcolor14 color14

#set_from_resource $xcolor7 color7

#set_from_resource $xcolor15 color15

# Manual color settings.

# red theme

#set $xforeground #c5c8c6

#set $xbackground #1d1f21

#set $xcursor #c5c8c6

#set $xcolor0 #282a2e

#set $xcolor8 #373b41

#set $xcolor1 #a54242

#set $xcolor9 #cc6666

#set $xcolor2 #8c9440

#set $xcolor10 #b5bd68

#set $xcolor3 #de935f

#set $xcolor11 #f0c674

#set $xcolor4 #5f819d

#set $xcolor12 #81a2be

#set $xcolor5 #85678f

#set $xcolor13 #b294bb

#set $xcolor6 #5e8d87

#set $xcolor14 #8abeb7

#set $xcolor7 #707880

#set $xcolor15 #c5c8c6

# blue theme

set $xforeground #c5c8c6

set $xbackground #1d1f21

set $xcursor #c5c8c6

set $xcolor0 #0d3264

set $xcolor8 #373b41

set $xcolor1 #467ecb

set $xcolor9 #cc6666

set $xcolor2 #8c9440

set $xcolor10 #b5bd68

set $xcolor3 #de935f

set $xcolor11 #f0c674

set $xcolor4 #5f819d

set $xcolor12 #81a2be

set $xcolor5 #85678f

set $xcolor13 #b294bb

set $xcolor6 #6298e0

set $xcolor14 #8abeb7

set $xcolor7 #707880

set $xcolor15 #c5c8c6

# Colors

# Class                border          backgr      text            indic

client.focused          $xcolor6      $xcolor1    $xbackground  $xcolor7

client.focused_inactive $xcolor6      $xcolor0    $xcolor14

client.unfocused        $xcolor6      $xcolor0    $xcolor14

client.urgent          $xbackground  $xcolor9    $xbackground

client.placeholder      $xcolor7      $xcolor7    $xcolor14

# Define names for default workspaces for which we configure key bindings later on.

# We use variables to avoid repeating the names in multiple places.

set $ws1 "1:I"

set $ws2 "2:II"

set $ws3 "3:III"

set $ws4 "4:IV"

set $ws5 "5:V"

set $ws6 "6:VI"

set $ws7 "7:VII"

set $ws8 "8:VIII"

set $ws9 "9:IX"

set $ws10 "10:X"

# switch to workspace

bindsym $modkey+1 workspace $ws1

bindsym $modkey+2 workspace $ws2

bindsym $modkey+3 workspace $ws3

bindsym $modkey+4 workspace $ws4

bindsym $modkey+5 workspace $ws5

bindsym $modkey+6 workspace $ws6

bindsym $modkey+7 workspace $ws7

bindsym $modkey+8 workspace $ws8

bindsym $modkey+9 workspace $ws9

bindsym $modkey+0 workspace $ws10

# move focused container to workspace

bindsym $modkey+Shift+1 move container to workspace $ws1

bindsym $modkey+Shift+2 move container to workspace $ws2

bindsym $modkey+Shift+3 move container to workspace $ws3

bindsym $modkey+Shift+4 move container to workspace $ws4

bindsym $modkey+Shift+5 move container to workspace $ws5

bindsym $modkey+Shift+6 move container to workspace $ws6

bindsym $modkey+Shift+7 move container to workspace $ws7

bindsym $modkey+Shift+8 move container to workspace $ws8

bindsym $modkey+Shift+9 move container to workspace $ws9

bindsym $modkey+Shift+0 move container to workspace $ws10

# reload the configuration file

bindsym $modkey+Shift+c reload

# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)

bindsym $modkey+Shift+r restart

# exit i3 (logs you out of your X session) | Changes was made here.

#bindsym $modkey+Shift+e exec --no-startup-id "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"

# resize window (you can also use the mouse for that)

mode "resize" {

    # These bindings trigger as soon as you enter the resize mode

    # Pressing left will shrink the window’s width.

    # Pressing right will grow the window’s width.

    # Pressing up will shrink the window’s height.

    # Pressing down will grow the window’s height.

    bindsym $left      resize shrink width 12 px or 12 ppt

    bindsym $down      resize grow height 12 px or 12 ppt

    bindsym $up        resize shrink height 12 px or 12 ppt

    bindsym $right      resize grow width 12 px or 12 ppt

    # same bindings, but for the arrow keys

    bindsym Left        resize shrink width 12 px or 12 ppt

    bindsym Down        resize grow height 12 px or 12 ppt

    bindsym Up          resize shrink height 12 px or 12 ppt

    bindsym Right      resize grow width 12 px or 12 ppt

    bindsym $modkey+$left      resize shrink width 01 px or 01 ppt

    bindsym $modkey+$down      resize grow height 01 px or 01 ppt

    bindsym $modkey+$up        resize shrink height 01 px or 01 ppt

    bindsym $modkey+$right      resize grow width 01 px or 01 ppt

    bindsym $modkey+Left        resize shrink width 01 px or 01 ppt

    bindsym $modkey+Down        resize grow height 01 px or 01 ppt

    bindsym $modkey+Up          resize shrink height 01 px or 01 ppt

    bindsym $modkey+Right      resize grow width 01 px or 01 ppt

    # back to normal: Enter or Escape

    bindsym Return mode "default"

    bindsym Escape mode "default"

}

bindsym $modkey+r mode "resize"

# Start i3bar to display a workspace bar (plus the system information i3status

# finds out, if available)

bar {

    status_command i3status

    mode dock

    position top

    strip_workspace_numbers yes

    font pango: Terminus (TTF) medium 10

    separator_symbol ")("

    colors {

        #Where      #Color

        background  $xbackground

        statusline  $xforeground

        #Where              #Border        #Background    #Text

        focused_workspace  $xbackground    $xcolor1        $xbackground

        #urgent_workspace    $xbackground    $xcolor9        $xbackground

        urgent_workspace    $xbackground    $xcolor1        $xbackground

        inactive_workspace  $xbackground    $xcolor0        $xforeground

    }

}

# Toggle bar

bindsym $modkey+m bar mode toggle

# Back and forth when pressing the same workspace keybind

workspace_auto_back_and_forth yes

# Display urgent notification on windows

force_display_urgency_hint 500 ms

# Locker configuration

set $Locker i3lock -d -c $black0 -f

set $mode_system System (l) lock, (e) logout, (s) suspend, (h) hibernate, (r) reboot, (Shift+s) shutdown, (b) off-screen

mode "$mode_system" {

    bindsym l exec --no-startup-id $Locker, mode "default"

    bindsym e exec --no-startup-id i3-msg exit, mode "default"

    bindsym s exec --no-startup-id $Locker && systemctl suspend, mode "default"

    bindsym h exec --no-startup-id $Locker && systemctl hibernate, mode "default"

    bindsym r exec --no-startup-id systemctl reboot, mode "default"

    bindsym b exec --no-startup-id sleep 1 && xset dpms force off, mode "default"

    bindsym Shift+s exec --no-startup-id systemctl poweroff -i, mode "default"

    # back to normal: Enter or Escape

    bindsym Return mode "default"

    bindsym Escape mode "default"

}

bindsym $modkey+Shift+e mode "$mode_system"

# Misc (above)

new_window pixel 4

# Floating dialogs

for_window [window_role="pop-up"] floating enable

for_window [window_role="task_dialog"] floating enable

# i3-gaps configuration

gaps inner 10

gaps outer 0

smart_gaps on

set $mode_gaps Gaps: (o) outer, (i) inner

set $mode_gaps_outer Outer Gaps: +|-|0 (local), Shift + +|-|0 (global)

set $mode_gaps_inner Inner Gaps: +|-|0 (local), Shift + +|-|0 (global)

bindsym $modkey+Shift+g mode "$mode_gaps"

mode "$mode_gaps" {

    bindsym o      mode "$mode_gaps_outer"

    bindsym i      mode "$mode_gaps_inner"

    bindsym Return mode "default"

    bindsym Escape mode "default"

}

mode "$mode_gaps_inner" {

    bindsym plus  gaps inner current plus 5

    bindsym minus gaps inner current minus 5

    bindsym 0    gaps inner current set 0

    bindsym Shift+plus  gaps inner all plus 5

    bindsym Shift+minus gaps inner all minus 5

    bindsym Shift+0    gaps inner all set 0

    bindsym Return mode "default"

    bindsym Escape mode "default"

}

mode "$mode_gaps_outer" {

    bindsym plus  gaps outer current plus 5

    bindsym minus gaps outer current minus 5

    bindsym 0    gaps outer current set 0

    bindsym Shift+plus  gaps outer all plus 5

    bindsym Shift+minus gaps outer all minus 5

    bindsym Shift+0    gaps outer all set 0

    bindsym Return mode "default"

    bindsym Escape mode "default"

}

######################################################################

# automatically start i3-config-wizard to offer the user to create a

# keysym-based config which used their favorite modifier (alt or windows)

#

# i3-config-wizard will not launch if there already is a config file

# in ~/.i3/config.

#

# Please remove the following exec line:

#######################################################################

exec --no-startup-id i3-config-wizard

相关文章

网友评论

      本文标题:解读默认的i3配置文件,会用英文词典即可,如果你不愿意花时间看代

      本文链接:https://www.haomeiwen.com/subject/vrigbctx.html