全套工具下载地址

我的百度网盘链接
链接：https://pan.baidu.com/s/1mdI6iD4J9bLlBvbdE7CX3g
提取码：l548

本课程所需要的基础

arduino IED编写ESP8266 环境搭建与程序下载 教程

最小系统电路图

操作步骤如下，blinker官方网站

https://diandeng.tech/doc/home

在blinker App上新建一个按钮 按钮的数据键名叫 btn

blinker APP控制esp8266的灯

#define BLINKER_PRINT Serial
#define BLINKER_WIFI

#include <Blinker.h>

char auth[] = "b7d4ed6a242d";
char ssid[] = "bad123";
char pswd[] = "1234567890";

// 新建组件对象
BlinkerButton Button1("btn");

// 按下按键即会执行该函数
void button1_callback(const String & state) {
    BLINKER_LOG("get button state: ", state);
    digitalWrite(LED_BUILTIN, !digitalRead(LED_BUILTIN));
}

// 如果未绑定的组件被触发，则会执行其中内容
void dataRead(const String & data)
{
    BLINKER_LOG("Blinker readString: ", data);
}

void setup() {
    // 初始化串口
    Serial.begin(115200);

    #if defined(BLINKER_PRINT)
        BLINKER_DEBUG.stream(BLINKER_PRINT);
    #endif

    // 初始化有LED的IO
    pinMode(LED_BUILTIN, OUTPUT);
    digitalWrite(LED_BUILTIN, HIGH);
    // 初始化blinker
    Blinker.begin(auth, ssid, pswd);
    Blinker.attachData(dataRead);
    Button1.attach(button1_callback);
}

void loop() {
    Blinker.run();
}

最终小爱同学控制亮度和开关

#define BLINKER_WIFI
#define BLINKER_MIOT_LIGHT
#define BLINKER_PRINT Serial

#include <Blinker.h>

char auth[] = "b7d4ed6a242d";
char ssid[] = "bad123";
char pswd[] = "1234567890";

// 新建组件对象
BlinkerButton Button1("btn");
void miotBright(const String & bright)
{
    int colorW;
    BLINKER_LOG("need set brightness: ", bright);

    colorW = bright.toInt();
    
    analogWrite(LED_BUILTIN,1023-colorW*10.23);//0-1023    
    
    BLINKER_LOG("now set brightness: ", colorW);

    BlinkerMIOT.brightness(colorW);
    BlinkerMIOT.print();
}
void miotPowerState(const String & state)
{
    BLINKER_LOG("need set power state: ", state);

    if (state == BLINKER_CMD_ON) {
        digitalWrite(LED_BUILTIN, LOW);

        BlinkerMIOT.powerState("on");
        BlinkerMIOT.print();
    }
    else if (state == BLINKER_CMD_OFF) {
        digitalWrite(LED_BUILTIN, HIGH);

        BlinkerMIOT.powerState("off");
        BlinkerMIOT.print();
    }
}
// 按下按键即会执行该函数
void button1_callback(const String & state) {
    BLINKER_LOG("get button state: ", state);
    digitalWrite(LED_BUILTIN, !digitalRead(LED_BUILTIN));
}

// 如果未绑定的组件被触发，则会执行其中内容
void dataRead(const String & data)
{
    BLINKER_LOG("Blinker readString: ", data);
}

void setup() {
    // 初始化串口
    Serial.begin(115200);

    #if defined(BLINKER_PRINT)
        BLINKER_DEBUG.stream(BLINKER_PRINT);
    #endif

    // 初始化有LED的IO
    pinMode(LED_BUILTIN, OUTPUT);
    digitalWrite(LED_BUILTIN, HIGH);
    // 初始化blinker
    Blinker.begin(auth, ssid, pswd);
    Blinker.attachData(dataRead);
    Button1.attach(button1_callback);
    BlinkerMIOT.attachPowerState(miotPowerState);
    BlinkerMIOT.attachBrightness(miotBright);
}

void loop() {
    Blinker.run();
}