华为PPPOE配置

作者: 王力_9541 | 来源:发表于2019-11-15 13:28 被阅读0次

华为PPPOE配置
Linux通过PPPoE拨号上网
PPPoE原理配置
Linux 播号上网
MACBOOK配置PPPoE拨号
PPPoE & PPP
springboot配置文件拉取数据
OPNsense双线路pppoe负载均衡配置方法
虚拟机Ubuntu 搭建本地PPPOE服务器环境
MT7688学习笔记（13）——C++编程配置PPPoE拨号

一、实验拓扑

image.png

二、设备配置

PPPOE Client主要配置：

<PPPOEClient>display current-configuration 
[V200R003C00]
#
 sysname PPPOEClient
#
interface Dialer1
 link-protocol ppp
 ppp pap local-user huawei password cipher %$%$'ub%HNMSBRG\~GP&3J6J,.RN%$%$ 
 ip address ppp-negotiate
 dialer user huawei
 dialer bundle 1
 dialer-group 1
#
interface GigabitEthernet0/0/0
 pppoe-client dial-bundle-number 1 
#
dialer-rule
 dialer-rule 1 ip permit
#
return
<PPPOEClient>

PPPOE Server主要配置：

<PPPOEServer>display current-configuration 
[V200R003C00]
#
 sysname PPPOEServer
#
ip pool pool-pppoe
 gateway-list 10.1.1.1 
 network 10.1.1.0 mask 255.255.255.0 
#
aaa 
 authentication-scheme default
 authorization-scheme default
 accounting-scheme default
 domain default 
 domain default_admin 
 local-user huawei password cipher %$%$z"(j7ltzQJ3W,3+z"6'51OkN%$%$
 local-user huawei service-type ppp
#
interface Virtual-Template0
 ppp authentication-mode pap 
 remote address pool pool-pppoe
 ip address 10.1.1.1 255.255.255.0 
#
interface GigabitEthernet0/0/0
 pppoe-server bind Virtual-Template 0
#
return
<PPPOEServer>

三、实验结果

PPPOE客户端查看拨号状态

<PPPOEClient>display pppoe-client session summary 
PPPoE Client Session:
ID   Bundle  Dialer  Intf             Client-MAC    Server-MAC    State
1    1       1       GE0/0/0          00e0fc3122b7  00e0fce54c0d  UP    
<PPPOEClient>display ip int brief 
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 3
The number of interface that is DOWN in Physical is 2
The number of interface that is UP in Protocol is 2
The number of interface that is DOWN in Protocol is 3

Interface                         IP Address/Mask      Physical   Protocol  
Dialer1                           10.1.1.254/32        up         up(s)     
GigabitEthernet0/0/0              unassigned           up         down      
GigabitEthernet0/0/1              unassigned           down       down      
GigabitEthernet0/0/2              unassigned           down       down      
NULL0                             unassigned           up         up(s)     
<PPPOEClient>ping 10.1.1.1
  PING 10.1.1.1: 56  data bytes, press CTRL_C to break
    Reply from 10.1.1.1: bytes=56 Sequence=1 ttl=255 time=100 ms
    Reply from 10.1.1.1: bytes=56 Sequence=2 ttl=255 time=30 ms
    Reply from 10.1.1.1: bytes=56 Sequence=3 ttl=255 time=30 ms
    Reply from 10.1.1.1: bytes=56 Sequence=4 ttl=255 time=20 ms
    Reply from 10.1.1.1: bytes=56 Sequence=5 ttl=255 time=20 ms

  --- 10.1.1.1 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 20/40/100 ms

<PPPOEClient>

PPPOE服务端查看回话状态

<PPPOEServer>display access-user 
 ------------------------------------------------------------------------------
 UserID Username                       IP address                   MAC  
 ------------------------------------------------------------------------------
 146    huawei                         -                         00e0-fc31-22b7 
 ------------------------------------------------------------------------------
 Total 1,1 printed
<PPPOEServer>display access-user user-id 146

Basic:
  User id                         : 146
  User name                       : huawei
  Domain-name                     : default                         
  User MAC                        : 00e0-fc31-22b7
  User IP address                 : 254.1.1.10
  User vpn-instance               : -
  User access Interface           : Virtual-Template0:0
  QinQVlan/UserVlan               : 0/0
  User access time                : 2019/11/15 13:12:40
  User accounting session ID      : PPPOESe00000000000000c71ace000146
  User access type                : PPPoE

AAA:
  User authentication type        : PPP    authentication
  Current authentication method   : Local
  Current authorization method    : -
  Current accounting method       : None

<PPPOEServer>display interface brief 
PHY: Physical
*down: administratively down
(l): loopback
(s): spoofing
(b): BFD down
^down: standby
(e): ETHOAM down
(d): Dampening Suppressed
InUti/OutUti: input utility/output utility
Interface                   PHY   Protocol InUti OutUti   inErrors  outErrors
GigabitEthernet0/0/0        up    down        0%     0%          0          0
GigabitEthernet0/0/1        down  down        0%     0%          0          0
GigabitEthernet0/0/2        down  down        0%     0%          0          0
NULL0                       up    up(s)       0%     0%          0          0
Virtual-Template0           up    up          0%     0%          0          0
<PPPOEServer>display ip interface brief 
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 3
The number of interface that is DOWN in Physical is 2
The number of interface that is UP in Protocol is 2
The number of interface that is DOWN in Protocol is 3

Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              unassigned           up         down      
GigabitEthernet0/0/1              unassigned           down       down      
GigabitEthernet0/0/2              unassigned           down       down      
NULL0                             unassigned           up         up(s)     
Virtual-Template0                 10.1.1.1/24          up         up        
<PPPOEServer>

四、PPPOE会话阶段

开启debug

<PPPOEServer>terminal monitor 
Info: Current terminal monitor is on.
<PPPOEServer>terminal debugging 
Info: Current terminal debugging is on.
<PPPOEServer>debugging pppoe-server event

PPPOE用户强制下线

[PPPOEServer-aaa]cut access-user user-id 146
Info: Total 1  user(s) being cut.
[PPPOEServer-aaa]
Nov 15 2019 13:32:38-08:00 PPPOEServer %%01IFNET/4/LINK_STATE(l)[4]:The line pro
tocol PPP on the interface Virtual-Template0:0 has entered the DOWN state. 
[PPPOEServer-aaa]
Nov 15 2019 13:32:38-08:00 PPPOEServer %%01IFNET/4/LINK_STATE(l)[5]:The line pro
tocol PPP IPCP on the interface Virtual-Template0:0 has entered the DOWN state. 

[PPPOEServer-aaa]
Nov 15 2019 13:32:38.411.1-08:00 PPPOEServer PPPOE/7/debug2:
  2019-11-15 13:32:38.411: PPPoE Event: GigabitEthernet0/0/0, session 1(Virtual-
Template0:0), OUT PADT packet

PPPOE上线会话

[PPPOEServer-aaa]
Nov 15 2019 13:32:38.411.2-08:00 PPPOEServer PPPOE/7/debug2:
  2019-11-15 13:32:38.411: PPPoE Event: GigabitEthernet0/0/0, session 1(Virtual-
Template0:0), VPDN session deleted 

[PPPOEServer-aaa]
Nov 15 2019 13:32:53.641.1-08:00 PPPOEServer PPPOE/7/debug2:
  2019-11-15 13:32:53.641: PPPoE Event: GigabitEthernet0/0/0, IN PADI packet 

[PPPOEServer-aaa]
Nov 15 2019 13:32:53.641.2-08:00 PPPOEServer PPPOE/7/debug2:
  2019-11-15 13:32:53.641: PPPoE Event: GigabitEthernet0/0/0, OUT PADO packet 

[PPPOEServer-aaa]
Nov 15 2019 13:32:53.661.1-08:00 PPPOEServer PPPOE/7/debug2:
  2019-11-15 13:32:53.661: PPPoE Event: GigabitEthernet0/0/0, IN PADR packet 

[PPPOEServer-aaa]
Nov 15 2019 13:32:53.661.2-08:00 PPPOEServer PPPOE/7/debug2:
  2019-11-15 13:32:53.661: PPPoE Event: GigabitEthernet0/0/0, session 1(Virtual-
Template0:0), VPDN session created 

[PPPOEServer-aaa]
Nov 15 2019 13:32:53.661.3-08:00 PPPOEServer PPPOE/7/debug2:
  2019-11-15 13:32:53.661: PPPoE Event: GigabitEthernet0/0/0, session 1(Virtual-
Template0:0), OUT PADS packet 

[PPPOEServer-aaa]
Nov 15 2019 13:32:53-08:00 PPPOEServer %%01IFNET/4/LINK_STATE(l)[6]:The line pro
tocol PPP on the interface Virtual-Template0:0 has entered the UP state. 
[PPPOEServer-aaa]
Nov 15 2019 13:32:53-08:00 PPPOEServer %%01IFNET/4/LINK_STATE(l)[7]:The line pro
tocol PPP IPCP on the interface Virtual-Template0:0 has entered the UP state. 
[PPPOEServer-aaa]q
[PPPOEServer]q
<PPPOEServer>undo debugging

华为PPPOE配置
一、实验拓扑二、设备配置 PPPOE Client主要配置： PPPOE Server主要配置：三、实验结果 ...
Linux通过PPPoE拨号上网
环境系统：CentOS 7.8 安装安装# yum install rp-pppoe 配置# pppoe-se...
PPPoE原理配置
1.前言数字用户线路 DSL(Digital Subscriber Line）是以电话线为传输介质的传输数字信号...
Linux 播号上网
配置PPPOE 输入宽带账号这一步要选No 查看连接状态
MACBOOK配置PPPoE拨号
MAC电脑端拨号 MAC一般没有无线网卡，可以接USB网卡测试。在无线信号右键单击→“打开网络偏好设置” 选中自己...
PPPoE & PPP
PPPoE PPPoE：Point-to-Point Protocol over Ethernet，RFC 251...
springboot配置文件拉取数据
场景：由于表结构一直变更，无法从数据库拉取数据，现数据从配置文件里取数据配置：application-pppoe...
OPNsense双线路pppoe负载均衡配置方法
环境：Opnsense18.1.3 前提：Opnsense已配置一条pppoe宽带上网，然后老婆改手机资费，联通公...
虚拟机Ubuntu 搭建本地PPPOE服务器环境
Win10自带的虚拟机 Hyper-V 网卡需采用桥接模式！虚拟机网卡配置如下：二、虚拟机配置PPPOE服务...
MT7688学习笔记（13）——C++编程配置PPPoE拨号
一、PPPoE拨号上网语法在设置pppoe时要确保设备WAN口连接的外网具备PPPoE的服务器，比如小区宽带、光...