shell 脚本记录

作者: 前浪浪奔浪流 | 来源:发表于2022-03-16 14:31 被阅读0次

服务器系统配置初始化

#/bin/bash
# 安装系统性能分析工具及其他
yum install gcc make autoconf vim sysstat net-tools iostat iftop iotp wget lrzsz lsof unzip openssh-clients net-tool vim ntpdate -y
# 设置时区并同步时间
ln -s /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
if ! crontab -l |grep ntpdate &>/dev/null ; then
    (echo "* 1 * * * ntpdate time.windows.com >/dev/null 2>&1";crontab -l) |crontab 
fi
 
# 禁用selinux
sed -i '/SELINUX/{s/permissive/disabled/}' /etc/selinux/config
 
# 关闭防火墙
if egrep "7.[0-9]" /etc/redhat-release &>/dev/null; then
    systemctl stop firewalld
    systemctl disable firewalld
elif egrep "6.[0-9]" /etc/redhat-release &>/dev/null; then
    service iptables stop
    chkconfig iptables off
fi
 
# 历史命令显示操作时间
if ! grep HISTTIMEFORMAT /etc/bashrc; then
    echo 'export HISTTIMEFORMAT="%Y-%m-%d %H:%M:%S  `whoami` "' >> /etc/bashrc
fi
 
# SSH超时时间
if ! grep "TMOUT=600" /etc/profile &>/dev/null; then
    echo "export TMOUT=600" >> /etc/profile
fi
 
# 禁止root远程登录 切记给系统添加普通用户，给su到root的权限
sed -i 's/#PermitRootLogin yes/PermitRootLogin no/' /etc/ssh/sshd_config
 
# 禁止定时任务向发送邮件
sed -i 's/^MAILTO=root/MAILTO=""/' /etc/crontab 
 
# 设置最大打开文件数
if ! grep "* soft nofile 65535" /etc/security/limits.conf &>/dev/null; then
cat >> /etc/security/limits.conf << EOF
    * soft nofile 65535
    * hard nofile 65535
EOF
fi
 
# 系统内核优化
cat >> /etc/sysctl.conf << EOF
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_max_tw_buckets = 20480
net.ipv4.tcp_max_syn_backlog = 20480
net.core.netdev_max_backlog = 262144
net.ipv4.tcp_fin_timeout = 20  
EOF
 
# 减少SWAP使用
echo "0" > /proc/sys/vm/swappiness

批量创建多个用户并设置密码

#!/bin/bash
USER_LIST=$@
USER_FILE=./user.info
for USER in $USER_LIST;do
 if ! id $USER &>/dev/null; then
  PASS=$(echo $RANDOM |md5sum |cut -c 1-8)
  useradd $USER
  echo $PASS | passwd --stdin $USER &>/dev/null
  echo "$USER   $PASS" >> $USER_FILE
  echo "$USER User create successful."
 else
  echo "$USER User already exists!"
 fi
done

一键查看服务器利用率

#!/bin/bash
function cpu(){
 
 util=$(vmstat | awk '{if(NR==3)print $13+$14}')
 iowait=$(vmstat | awk '{if(NR==3)print $16}')
 echo "CPU -使用率：${util}% ,等待磁盘IO相应使用率：${iowait}:${iowait}%"
 
}
function memory (){
 
 total=`free -m |awk '{if(NR==2)printf "%.1f",$2/1024}'`
    used=`free -m |awk '{if(NR==2) printf "%.1f",($2-$NF)/1024}'`
    available=`free -m |awk '{if(NR==2) printf "%.1f",$NF/1024}'`
    echo "内存 - 总大小: ${total}G , 使用: ${used}G , 剩余: ${available}G"
}
disk(){
 
 fs=$(df -h |awk '/^\/dev/{print $1}')
    for p in $fs; do
        mounted=$(df -h |awk '$1=="'$p'"{print $NF}')
        size=$(df -h |awk '$1=="'$p'"{print $2}')
        used=$(df -h |awk '$1=="'$p'"{print $3}')
        used_percent=$(df -h |awk '$1=="'$p'"{print $5}')
        echo "硬盘 - 挂载点: $mounted , 总大小: $size , 使用: $used , 使用率: $used_percent"
    done
 
}
function tcp_status() {
    summary=$(ss -antp |awk '{status[$1]++}END{for(i in status) printf i":"status[i]" "}')
    echo "TCP连接状态 - $summary"
}
cpu
memory
disk
tcp_status

找出占用CPU 内存过高的进程

#!/bin/bash
echo "-------------------CUP占用前10排序--------------------------------"
ps -eo user,pid,pcpu,pmem,args --sort=-pcpu  |head -n 10
echo "-------------------内存占用前10排序--------------------------------"
ps -eo user,pid,pcpu,pmem,args --sort=-pmem  |head -n 10

查看网卡的实时流量

#!/bin/bash
eth0=$1
echo  -e    "流量进入--流量传出    "
while true; do
 old_in=$(cat /proc/net/dev |grep $eth0 |awk '{print $2}')
 old_out=$(cat /proc/net/dev |grep $eth0 |awk '{print $10}')
 sleep 1
 new_in=$(cat /proc/net/dev |grep $eth0 |awk '{print $2}')
 new_out=$(cat /proc/net/dev |grep $eth0 |awk '{print $10}')
 in=$(printf "%.1f%s" "$((($new_in-$old_in)/1024))" "KB/s")
 out=$(printf "%.1f%s" "$((($new_out-$old_out)/1024))" "KB/s")
 echo "$in $out"
done

监控多台服务器磁盘利用率脚本

#!/bin/bash
HOST_INFO=host.info
for IP in $(awk '/^[^#]/{print $1}' $HOST_INFO); do
 #取出用户名和端口
    USER=$(awk -v ip=$IP 'ip==$1{print $2}' $HOST_INFO)
    PORT=$(awk -v ip=$IP 'ip==$1{print $3}' $HOST_INFO)
 #创建临时文件，保存信息
    TMP_FILE=/tmp/disk.tmp
 #通过公钥登录获取主机磁盘信息
    ssh -p $PORT $USER@$IP 'df -h' > $TMP_FILE
 #分析磁盘占用空间
    USE_RATE_LIST=$(awk 'BEGIN{OFS="="}/^\/dev/{print $NF,int($5)}' $TMP_FILE)
 #循环磁盘列表，进行判断
    for USE_RATE in $USE_RATE_LIST; do
  #取出等号（=）右边的值 挂载点名称
        PART_NAME=${USE_RATE%=*}  
  #取出等号（=）左边的值  磁盘利用率
        USE_RATE=${USE_RATE#*=}
  #进行判断
        if [ $USE_RATE -ge 80 ]; then
            echo "Warning: $PART_NAME Partition usage $USE_RATE%!"
    echo "服务器$IP的磁盘空间占用过高，请及时处理" | mail -s "空间不足警告" 你的qq@qq.com
  else
   echo "服务器$IP的$PART_NAME目录空间良好"
        fi
    done
done

批量检测网站是否异常并邮件通知

#!/bin/bash  
URL_LIST="www.baidu.com www.ctnrs.com www.der-matech.net.cn www.der-matech.com.cn www.der-matech.cn www.der-matech.top www.der-matech.org"
for URL in $URL_LIST; do
    FAIL_COUNT=0
    for ((i=1;i<=3;i++)); do
        HTTP_CODE=$(curl -o /dev/null --connect-timeout 3 -s -w "%{http_code}" $URL)
        if [ $HTTP_CODE -eq 200 ]; then
            echo "$URL OK"
            break
        else
            echo "$URL retry $FAIL_COUNT"
            let FAIL_COUNT++
        fi
    done
    if [ $FAIL_COUNT -eq 3 ]; then
        echo "Warning: $URL Access failure!"
  echo "网站$URL坏掉，请及时处理" | mail -s "$URL网站高危" 1794748404@qq.com
    fi
done

批量主机远程执行命令脚本

#!/bin/bash
COMMAND=$*
HOST_INFO=host.info
for IP in $(awk '/^[^#]/{print $1}' $HOST_INFO); do
    USER=$(awk -v ip=$IP 'ip==$1{print $2}' $HOST_INFO)
    PORT=$(awk -v ip=$IP 'ip==$1{print $3}' $HOST_INFO)
    PASS=$(awk -v ip=$IP 'ip==$1{print $4}' $HOST_INFO)
    expect -c "
       spawn ssh -p $PORT $USER@$IP
       expect {
          \"(yes/no)\" {send \"yes\r\"; exp_continue}
          \"password:\" {send \"$PASS\r\"; exp_continue}
          \"$USER@*\" {send \"$COMMAND\r exit\r\"; exp_continue}
       }
    "
    echo "-------------------"
done

一键部署LNMP网站平台脚本

#!/bin/bash
NGINX_V=1.15.6
PHP_V=5.6.36
TMP_DIR=/tmp
 
INSTALL_DIR=/usr/local
 
PWD_C=$PWD
 
echo
echo -e "\tMenu\n"
echo -e "1. Install Nginx"
echo -e "2. Install PHP"
echo -e "3. Install MySQL"
echo -e "4. Deploy LNMP"
echo -e "9. Quit"
 
function command_status_check() {
 if [ $? -ne 0 ]; then
  echo $1
  exit
 fi 
}
 
function install_nginx() {
    cd $TMP_DIR
    yum install -y gcc gcc-c++ make openssl-devel pcre-devel wget
    wget http://nginx.org/download/nginx-${NGINX_V}.tar.gz
    tar zxf nginx-${NGINX_V}.tar.gz
    cd nginx-${NGINX_V}
    ./configure --prefix=$INSTALL_DIR/nginx \
    --with-http_ssl_module \
    --with-http_stub_status_module \
    --with-stream
    command_status_check "Nginx - 平台环境检查失败！"
    make -j 4 
    command_status_check "Nginx - 编译失败！"
    make install
    command_status_check "Nginx - 安装失败！"
    mkdir -p $INSTALL_DIR/nginx/conf/vhost
    alias cp=cp ; cp -rf $PWD_C/nginx.conf $INSTALL_DIR/nginx/conf
    rm -rf $INSTALL_DIR/nginx/html/*
    echo "ok" > $INSTALL_DIR/nginx/html/status.html
    echo '<?php echo "ok"?>' > $INSTALL_DIR/nginx/html/status.php
    $INSTALL_DIR/nginx/sbin/nginx
    command_status_check "Nginx - 启动失败！"
}
 
function install_php() {
 cd $TMP_DIR
    yum install -y gcc gcc-c++ make gd-devel libxml2-devel \
        libcurl-devel libjpeg-devel libpng-devel openssl-devel \
        libmcrypt-devel libxslt-devel libtidy-devel
    wget http://docs.php.net/distributions/php-${PHP_V}.tar.gz
    tar zxf php-${PHP_V}.tar.gz
    cd php-${PHP_V}
    ./configure --prefix=$INSTALL_DIR/php \
    --with-config-file-path=$INSTALL_DIR/php/etc \
    --enable-fpm --enable-opcache \
    --with-mysql --with-mysqli --with-pdo-mysql \
    --with-openssl --with-zlib --with-curl --with-gd \
    --with-jpeg-dir --with-png-dir --with-freetype-dir \
    --enable-mbstring --enable-hash
    command_status_check "PHP - 平台环境检查失败！"
    make -j 4 
    command_status_check "PHP - 编译失败！"
    make install
    command_status_check "PHP - 安装失败！"
    cp php.ini-production $INSTALL_DIR/php/etc/php.ini
    cp sapi/fpm/php-fpm.conf $INSTALL_DIR/php/etc/php-fpm.conf
    cp sapi/fpm/init.d.php-fpm /etc/init.d/php-fpm
    chmod +x /etc/init.d/php-fpm
    /etc/init.d/php-fpm start
    command_status_check "PHP - 启动失败！"
}
 
read -p "请输入编号：" number
case $number in
    1)
        install_nginx;;
    2)
        install_php;;
    3)
        install_mysql;;
    4)
        install_nginx
        install_php
        ;;
    9)
        exit;;
esac

监控MySQL主从同步状态是否异常脚本

#!/bin/bash  
HOST=localhost
USER=root
PASSWD=123.com
IO_SQL_STATUS=$(mysql -h$HOST -u$USER -p$PASSWD -e 'show slave status\G' 2>/dev/null |awk '/Slave_.*_Running:/{print $1$2}')
for i in $IO_SQL_STATUS; do
    THREAD_STATUS_NAME=${i%:*}
    THREAD_STATUS=${i#*:}
    if [ "$THREAD_STATUS" != "Yes" ]; then
        echo "Error: MySQL Master-Slave $THREAD_STATUS_NAME status is $THREAD_STATUS!" |mail -s "Master-Slave Staus" xxx@163.com
    fi
done

MySql数据库备份脚本

#分库备份
mysqldump -uroot -pxxx -B A > A.sql
#!/bin/bash
DATE=$(date +%F_%H-%M-%S)
HOST=localhost
USER=backup
PASS=123.com
BACKUP_DIR=/data/db_backup
DB_LIST=$(mysql -h$HOST -u$USER -p$PASS -s -e "show databases;" 2>/dev/null |egrep -v "Database|information_schema|mysql|performance_schema|sys")
 
for DB in $DB_LIST; do
    BACKUP_NAME=$BACKUP_DIR/${DB}_${DATE}.sql
    if ! mysqldump -h$HOST -u$USER -p$PASS -B $DB > $BACKUP_NAME 2>/dev/null; then
        echo "$BACKUP_NAME 备份失败!"
    fi
done

#分表备份
mysqldump -uroot -pxxx -A t > t.sql
#!/bin/bash
DATE=$(date +%F_%H-%M-%S)
HOST=localhost
USER=backup
PASS=123.com
BACKUP_DIR=/data/db_backup
DB_LIST=$(mysql -h$HOST -u$USER -p$PASS -s -e "show databases;" 2>/dev/null |egrep -v "Database|information_schema|mysql|performance_schema|sys")
 
for DB in $DB_LIST; do
    BACKUP_DB_DIR=$BACKUP_DIR/${DB}_${DATE}
    [ ! -d $BACKUP_DB_DIR ] && mkdir -p $BACKUP_DB_DIR &>/dev/null
    TABLE_LIST=$(mysql -h$HOST -u$USER -p$PASS -s -e "use $DB;show tables;" 2>/dev/null)
    for TABLE in $TABLE_LIST; do
        BACKUP_NAME=$BACKUP_DB_DIR/${TABLE}.sql 
        if ! mysqldump -h$HOST -u$USER -p$PASS $DB $TABLE > $BACKUP_NAME 2>/dev/null; then
            echo "$BACKUP_NAME 备份失败!"
        fi
    done
done

Nginx访问日志分析

#!/bin/bash
# 日志格式: $remote_addr - $remote_user [$time_local] "$request" $status $body_bytes_sent "$http_referer" "$http_user_agent" "$http_x_forwarded_for"
LOG_FILE=$1
echo "统计访问最多的10个IP"
awk '{a[$1]++}END{print "UV:",length(a);for(v in a)print v,a[v]}' $LOG_FILE |sort -k2 -nr |head -10
echo "----------------------"
 
echo "统计时间段访问最多的IP"
awk '$4>="[01/Dec/2018:13:20:25" && $4<="[27/Nov/2018:16:20:49"{a[$1]++}END{for(v in a)print v,a[v]}' $LOG_FILE |sort -k2 -nr|head -10
echo "----------------------"
 
echo "统计访问最多的10个页面"
awk '{a[$7]++}END{print "PV:",length(a);for(v in a){if(a[v]>10)print v,a[v]}}' $LOG_FILE |sort -k2 -nr
echo "----------------------"
 
echo "统计访问页面状态码数量"
awk '{a[$7" "$9]++}END{for(v in a){if(a[v]>5)print v,a[v]}}' $LOG_FILE |sort -k3 -nr

Nginx访问日志自动按天（周、月）切割

#!/bin/bash
#nginx日志目录
LOG_DIR=/www/server/nginx/logs
#获取到上一天的时间
YESTERDAY_TIME=$(date -d "yesterday" +%F)
#归档日志取时间
LOG_MONTH_DIR=$LOG_DIR/$(date +"%Y-%m")
#归档日志的名称
LOG_FILE_LIST="access.log"
 
for LOG_FILE in $LOG_FILE_LIST; do
    [ ! -d $LOG_MONTH_DIR ] && mkdir -p $LOG_MONTH_DIR
    mv $LOG_DIR/$LOG_FILE $LOG_MONTH_DIR/${LOG_FILE}_${YESTERDAY_TIME}
done
 
kill -USR1 $(cat $LOG_DIR/nginx.pid)

自动发布Java项目（Tomcat）

#!/bin/bash
DATE=$(date +%F_%T)
 
TOMCAT_NAME=$1
TOMCAT_DIR=/usr/local/$TOMCAT_NAME
ROOT=$TOMCAT_DIR/webapps/ROOT
 
BACKUP_DIR=/data/backup
WORK_DIR=/tmp
PROJECT_NAME=tomcat-java-demo
 
# 拉取代码
cd $WORK_DIR
if [ ! -d $PROJECT_NAME ]; then
   git clone https://github.com/lizhenliang/tomcat-java-demo
   cd $PROJECT_NAME
else
   cd $PROJECT_NAME
   git pull
fi
 
# 构建
mvn clean package -Dmaven.test.skip=true
if [ $? -ne 0 ]; then
   echo "maven build failure!"
   exit 1
fi
 
# 部署
TOMCAT_PID=$(ps -ef |grep "$TOMCAT_NAME" |egrep -v "grep|$$" |awk 'NR==1{print $2}')
[ -n "$TOMCAT_PID" ] && kill -9 $TOMCAT_PID
[ -d $ROOT ] && mv $ROOT $BACKUP_DIR/${TOMCAT_NAME}_ROOT$DATE
unzip $WORK_DIR/$PROJECT_NAME/target/*.war -d $ROOT
$TOMCAT_DIR/bin/startup.sh

自动发布PHP项目

#!/bin/bash
 
DATE=$(date +%F_%T)
 
WWWROOT=/usr/local/nginx/html/$1
 
 
BACKUP_DIR=/data/backup
WORK_DIR=/tmp
PROJECT_NAME=php-demo
 
 
# 拉取代码
cd $WORK_DIR
if [ ! -d $PROJECT_NAME ]; then
   git clone https://github.com/lizhenliang/php-demo
   cd $PROJECT_NAME
else
   cd $PROJECT_NAME
   git pull
fi
 
 
# 部署
if [ ! -d $WWWROOT ]; then
   mkdir -p $WWWROOT
   rsync -avz --exclude=.git $WORK_DIR/$PROJECT_NAME/* $WWWROOT
else
   rsync -avz --exclude=.git $WORK_DIR/$PROJECT_NAME/* $WWWROOT
fi

DOS攻击防范（自动屏蔽攻击IP）

#!/bin/bash
DATE=$(date +%d/%b/%Y:%H:%M)
#nginx日志
LOG_FILE=/usr/local/nginx/logs/demo2.access.log
#分析ip的访问情况
ABNORMAL_IP=$(tail -n5000 $LOG_FILE |grep $DATE |awk '{a[$1]++}END{for(i in a)if(a[i]>10)print i}')
for IP in $ABNORMAL_IP; do
    if [ $(iptables -vnL |grep -c "$IP") -eq 0 ]; then
        iptables -I INPUT -s $IP -j DROP
        echo "$(date +'%F_%T') $IP" >> /tmp/drop_ip.log
    fi
done

目录入侵检测与告警

#!/bin/bash
 
MON_DIR=/opt
inotifywait -mqr --format %f -e create $MON_DIR |\
while read files; do
   #同步文件
   rsync -avz /opt /tmp/opt
  #检测文件是否被修改
   #echo "$(date +'%F %T') create $files" | mail -s "dir monitor" xxx@163.com
done

shell 脚本记录

服务器系统配置初始化

批量创建多个用户并设置密码

一键查看服务器利用率

找出占用CPU 内存过高的进程

查看网卡的实时流量

监控多台服务器磁盘利用率脚本

批量检测网站是否异常并邮件通知

批量主机远程执行命令脚本

一键部署LNMP网站平台脚本

监控MySQL主从同步状态是否异常脚本

MySql数据库备份脚本

Nginx访问日志分析

Nginx访问日志自动按天（周、月）切割

自动发布Java项目（Tomcat）

自动发布PHP项目

DOS攻击防范（自动屏蔽攻击IP）

目录入侵检测与告警

相关文章

网友评论

延伸阅读

深度阅读

栏目导航

热点阅读

运维

开发技巧

Linux

日常shell脚本

shell