| 6 |
|
E |
Class not supported. |
| 61 |
— |
I |
Response bytes still available |
| 61 |
XX |
I |
Command successfully executed; ‘XX’ bytes of data are available and can be requested using GET RESPONSE. |
| 62 |
— |
W |
State of non-volatile memory unchanged |
| 62 |
00 |
W |
No information given (NV-Ram not changed) |
| 62 |
01 |
W |
NV-Ram not changed 1. |
| 62 |
81 |
W |
Part of returned data may be corrupted |
| 62 |
82 |
W |
End of file/record reached before reading Le bytes |
| 62 |
83 |
W |
Selected file invalidated |
| 62 |
84 |
W |
Selected file is not valid. FCI not formated according to ISO |
| 62 |
85 |
W |
No input data available from a sensor on the card. No Purse Engine enslaved for R3bc |
| 62 |
A2 |
W |
Wrong R-MAC |
| 62 |
A4 |
W |
Card locked (during reset( )) |
| 62 |
CX |
W |
Counter with value x (command dependent) |
| 62 |
F1 |
W |
Wrong C-MAC |
| 62 |
F3 |
W |
Internal reset |
| 62 |
F5 |
W |
Default agent locked |
| 62 |
F7 |
W |
Cardholder locked |
| 62 |
F8 |
W |
Basement is current agent |
| 62 |
F9 |
W |
CALC Key Set not unblocked |
| 62 |
FX |
W |
– |
| 62 |
XX |
W |
RFU |
| 63 |
— |
W |
State of non-volatile memory changed |
| 63 |
00 |
W |
No information given (NV-Ram changed) |
| 63 |
81 |
W |
File filled up by the last write. Loading/updating is not allowed. |
| 63 |
82 |
W |
Card key not supported. |
| 63 |
83 |
W |
Reader key not supported. |
| 63 |
84 |
W |
Plaintext transmission not supported. |
| 63 |
85 |
W |
Secured transmission not supported. |
| 63 |
86 |
W |
Volatile memory is not available. |
| 63 |
87 |
W |
Non-volatile memory is not available. |
| 63 |
88 |
W |
Key number not valid. |
| 63 |
89 |
W |
Key length is not correct. |
| 63 |
C0 |
W |
Verify fail, no try left. |
| 63 |
C1 |
W |
Verify fail, 1 try left. |
| 63 |
C2 |
W |
Verify fail, 2 tries left. |
| 63 |
C3 |
W |
Verify fail, 3 tries left. |
| 63 |
CX |
W |
The counter has reached the value ‘x’ (0 = x = 15) (command dependent). |
| 63 |
F1 |
W |
More data expected. |
| 63 |
F2 |
W |
More data expected and proactive command pending. |
| 63 |
FX |
W |
– |
| 63 |
XX |
W |
RFU |
| 64 |
— |
E |
State of non-volatile memory unchanged |
| 64 |
00 |
E |
No information given (NV-Ram not changed) |
| 64 |
01 |
E |
Command timeout. Immediate response required by the card. |
| 64 |
XX |
E |
RFU |
| 65 |
— |
E |
State of non-volatile memory changed |
| 65 |
00 |
E |
No information given |
| 65 |
01 |
E |
Write error. Memory failure. There have been problems in writing or reading the EEPROM. Other hardware problems may also bring this error. |
| 65 |
81 |
E |
Memory failure |
| 65 |
FX |
E |
– |
| 65 |
XX |
E |
RFU |
| 66 |
— |
S |
|
| 66 |
00 |
S |
Error while receiving (timeout) |
| 66 |
01 |
S |
Error while receiving (character parity error) |
| 66 |
02 |
S |
Wrong checksum |
| 66 |
03 |
S |
The current DF file without FCI |
| 66 |
04 |
S |
No SF or KF under the current DF |
| 66 |
69 |
S |
Incorrect Encryption/Decryption Padding |
| 66 |
XX |
S |
– |
| 67 |
— |
E |
|
| 67 |
00 |
E |
Wrong length |
| 67 |
XX |
E |
length incorrect (procedure)(ISO 7816-3) |
| 68 |
— |
E |
Functions in CLA not supported |
| 68 |
00 |
E |
No information given (The request function is not supported by the card) |
| 68 |
81 |
E |
Logical channel not supported |
| 68 |
82 |
E |
Secure messaging not supported |
| 68 |
83 |
E |
Last command of the chain expected |
| 68 |
84 |
E |
Command chaining not supported |
| 68 |
FX |
E |
– |
| 68 |
XX |
E |
RFU |
| 69 |
— |
E |
Command not allowed |
| 69 |
00 |
E |
No information given (Command not allowed) |
| 69 |
01 |
E |
Command not accepted (inactive state) |
| 69 |
81 |
E |
Command incompatible with file structure |
| 69 |
82 |
E |
Security condition not satisfied. |
| 69 |
83 |
E |
Authentication method blocked |
| 69 |
84 |
E |
Referenced data reversibly blocked (invalidated) |
| 69 |
85 |
E |
Conditions of use not satisfied. |
| 69 |
86 |
E |
Command not allowed (no current EF) |
| 69 |
87 |
E |
Expected secure messaging (SM) object missing |
| 69 |
88 |
E |
Incorrect secure messaging (SM) data object |
| 69 |
8D |
|
Reserved |
| 69 |
96 |
E |
Data must be updated again |
| 69 |
E1 |
E |
POL1 of the currently Enabled Profile prevents this action. |
| 69 |
F0 |
E |
Permission Denied |
| 69 |
F1 |
E |
Permission Denied – Missing Privilege |
| 69 |
FX |
E |
– |
| 69 |
XX |
E |
RFU |
| 6A |
— |
E |
Wrong parameter(s) P1-P2 |
| 6A |
00 |
E |
No information given (Bytes P1 and/or P2 are incorrect) |
| 6A |
80 |
E |
The parameters in the data field are incorrect. |
| 6A |
81 |
E |
Function not supported |
| 6A |
82 |
E |
File not found |
| 6A |
83 |
E |
Record not found |
| 6A |
84 |
E |
There is insufficient memory space in record or file |
| 6A |
85 |
E |
Lc inconsistent with TLV structure |
| 6A |
86 |
E |
Incorrect P1 or P2 parameter. |
| 6A |
87 |
E |
Lc inconsistent with P1-P2 |
| 6A |
88 |
E |
Referenced data not found |
| 6A |
89 |
E |
File already exists |
| 6A |
8A |
E |
DF name already exists. |
| 6A |
F0 |
E |
Wrong parameter value |
| 6A |
FX |
E |
– |
| 6A |
XX |
E |
RFU |
| 6B |
— |
E |
|
| 6B |
00 |
E |
Wrong parameter(s) P1-P2 |
| 6B |
XX |
E |
Reference incorrect (procedure byte), (ISO 7816-3) |
| 6C |
— |
E |
Wrong length Le |
| 6C |
00 |
E |
Incorrect P3 length. |
| 6C |
XX |
E |
Bad length value in Le; ‘xx’ is the correct exact Le |
| 6D |
— |
E |
|
| 6D |
00 |
E |
Instruction code not supported or invalid |
| 6D |
XX |
E |
Instruction code not programmed or invalid (procedure byte), (ISO 7816-3) |
| 6E |
— |
E |
|
| 6E |
00 |
E |
Class not supported |
| 6E |
XX |
E |
Instruction class not supported (procedure byte), (ISO 7816-3) |
| 6F |
— |
E |
Internal exception |
| 6F |
00 |
E |
Command aborted – more exact diagnosis not possible (e.g., operating system error). |
| 6F |
FF |
E |
Card dead (overuse, …) |
| 6F |
XX |
E |
No precise diagnosis (procedure byte), (ISO 7816-3) |
| 9- |
— |
|
|
| 90 |
00 |
I |
Command successfully executed (OK). |
| 90 |
04 |
W |
PIN not succesfully verified, 3 or more PIN tries left |
| 90 |
08 |
|
Key/file not found |
| 90 |
80 |
W |
Unblock Try Counter has reached zero |
| 91 |
00 |
|
OK |
| 91 |
01 |
|
States.activity, States.lock Status or States.lockable has wrong value |
| 91 |
02 |
|
Transaction number reached its limit |
| 91 |
0C |
|
No changes |
| 91 |
0E |
|
Insufficient NV-Memory to complete command |
| 91 |
1C |
|
Command code not supported |
| 91 |
1E |
|
CRC or MAC does not match data |
| 91 |
40 |
|
Invalid key number specified |
| 91 |
7E |
|
Length of command string invalid |
| 91 |
9D |
|
Not allow the requested command |
| 91 |
9E |
|
Value of the parameter invalid |
| 91 |
A0 |
|
Requested AID not present on PICC |
| 91 |
A1 |
|
Unrecoverable error within application |
| 91 |
AE |
|
Authentication status does not allow the requested command |
| 91 |
AF |
|
Additional data frame is expected to be sent |
| 91 |
BE |
|
Out of boundary |
| 91 |
C1 |
|
Unrecoverable error within PICC |
| 91 |
CA |
|
Previous Command was not fully completed |
| 91 |
CD |
|
PICC was disabled by an unrecoverable error |
| 91 |
CE |
|
Number of Applications limited to 28 |
| 91 |
DE |
|
File or application already exists |
| 91 |
EE |
|
Could not complete NV-write operation due to loss of power |
| 91 |
F0 |
|
Specified file number does not exist |
| 91 |
F1 |
|
Unrecoverable error within file |
| 92 |
0x |
I |
Writing to EEPROM successful after ‘x’ attempts. |
| 92 |
10 |
E |
Insufficient memory. No more storage available. |
| 92 |
40 |
E |
Writing to EEPROM not successful. |
| 93 |
01 |
|
Integrity error |
| 93 |
02 |
|
Candidate S2 invalid |
| 93 |
03 |
E |
Application is permanently locked |
| 94 |
00 |
E |
No EF selected. |
| 94 |
01 |
|
Candidate currency code does not match purse currency |
| 94 |
02 |
|
Candidate amount too high |
| 94 |
02 |
E |
Address range exceeded. |
| 94 |
03 |
|
Candidate amount too low |
| 94 |
04 |
E |
FID not found, record not found or comparison pattern not found. |
| 94 |
05 |
|
Problems in the data field |
| 94 |
06 |
E |
Required MAC unavailable |
| 94 |
07 |
|
Bad currency : purse engine has no slot with R3bc currency |
| 94 |
08 |
|
R3bc currency not supported in purse engine |
| 94 |
08 |
E |
Selected file type does not match command. |
| 95 |
80 |
|
Bad sequence |
| 96 |
81 |
|
Slave not found |
| 97 |
00 |
|
PIN blocked and Unblock Try Counter is 1 or 2 |
| 97 |
02 |
|
Main keys are blocked |
| 97 |
04 |
|
PIN not succesfully verified, 3 or more PIN tries left |
| 97 |
84 |
|
Base key |
| 97 |
85 |
|
Limit exceeded – C-MAC key |
| 97 |
86 |
|
SM error – Limit exceeded – R-MAC key |
| 97 |
87 |
|
Limit exceeded – sequence counter |
| 97 |
88 |
|
Limit exceeded – R-MAC length |
| 97 |
89 |
|
Service not available |
| 98 |
02 |
E |
No PIN defined. |
| 98 |
04 |
E |
Access conditions not satisfied, authentication failed. |
| 98 |
35 |
E |
ASK RANDOM or GIVE RANDOM not executed. |
| 98 |
40 |
E |
PIN verification not successful. |
| 98 |
50 |
E |
INCREASE or DECREASE could not be executed because a limit has been reached. |
| 98 |
62 |
E |
Authentication Error, application specific (incorrect MAC) |
| 99 |
00 |
|
1 PIN try left |
| 99 |
04 |
|
PIN not succesfully verified, 1 PIN try left |
| 99 |
85 |
|
Wrong status – Cardholder lock |
| 99 |
86 |
E |
Missing privilege |
| 99 |
87 |
|
PIN is not installed |
| 99 |
88 |
|
Wrong status – R-MAC state |
| 9A |
00 |
|
2 PIN try left |
| 9A |
04 |
|
PIN not succesfully verified, 2 PIN try left |
| 9A |
71 |
|
Wrong parameter value – Double agent AID |
| 9A |
72 |
|
Wrong parameter value – Double agent Type |
| 9D |
05 |
E |
Incorrect certificate type |
| 9D |
07 |
E |
Incorrect session data size |
| 9D |
08 |
E |
Incorrect DIR file record size |
| 9D |
09 |
E |
Incorrect FCI record size |
| 9D |
0A |
E |
Incorrect code size |
| 9D |
10 |
E |
Insufficient memory to load application |
| 9D |
11 |
E |
Invalid AID |
| 9D |
12 |
E |
Duplicate AID |
| 9D |
13 |
E |
Application previously loaded |
| 9D |
14 |
E |
Application history list full |
| 9D |
15 |
E |
Application not open |
| 9D |
17 |
E |
Invalid offset |
| 9D |
18 |
E |
Application already loaded |
| 9D |
19 |
E |
Invalid certificate |
| 9D |
1A |
E |
Invalid signature |
| 9D |
1B |
E |
Invalid KTU |
| 9D |
1D |
E |
MSM controls not set |
| 9D |
1E |
E |
Application signature does not exist |
| 9D |
1F |
E |
KTU does not exist |
| 9D |
20 |
E |
Application not loaded |
| 9D |
21 |
E |
Invalid Open command data length |
| 9D |
30 |
E |
Check data parameter is incorrect (invalid start address) |
| 9D |
31 |
E |
Check data parameter is incorrect (invalid length) |
| 9D |
32 |
E |
Check data parameter is incorrect (illegal memory check area) |
| 9D |
40 |
E |
Invalid MSM Controls ciphertext |
| 9D |
41 |
E |
MSM controls already set |
| 9D |
42 |
E |
Set MSM Controls data length less than 2 bytes |
| 9D |
43 |
E |
Invalid MSM Controls data length |
| 9D |
44 |
E |
Excess MSM Controls ciphertext |
| 9D |
45 |
E |
Verification of MSM Controls data failed |
| 9D |
50 |
E |
Invalid MCD Issuer production ID |
| 9D |
51 |
E |
Invalid MCD Issuer ID |
| 9D |
52 |
E |
Invalid set MSM controls data date |
| 9D |
53 |
E |
Invalid MCD number |
| 9D |
54 |
E |
Reserved field error |
| 9D |
55 |
E |
Reserved field error |
| 9D |
56 |
E |
Reserved field error |
| 9D |
57 |
E |
Reserved field error |
| 9D |
60 |
E |
MAC verification failed |
| 9D |
61 |
E |
Maximum number of unblocks reached |
| 9D |
62 |
E |
Card was not blocked |
| 9D |
63 |
E |
Crypto functions not available |
| 9D |
64 |
E |
No application loaded |
| 9E |
00 |
|
PIN not installed |
| 9E |
04 |
|
PIN not succesfully verified, PIN not installed |
| 9F |
00 |
|
PIN blocked and Unblock Try Counter is 3 |
| 9F |
04 |
|
PIN not succesfully verified, PIN blocked and Unblock Try Counter is 3 |
| 9F |
XX |
|
Command successfully executed; ‘xx’ bytes of data are available and can be requested using GET RESPONSE. |
| 9x |
XX |
|
Application related status, (ISO 7816-3) |
网友评论