美文网首页
如何配置NETCONF(设备侧)

如何配置NETCONF(设备侧)

作者: Zhang小二 | 来源:发表于2019-04-27 16:22 被阅读0次

    以华为设备为例,学习一下如何配置NETCONF,前提是设备支持配置NETCONF。

    配置SSH

    创建ssh用户

    [~HUAWEI]ssh user client001
    Info: Succeeded in adding a new SSH user.
    [*HUAWEI]aaa
    [*HUAWEI-aaa]local-user client001 password irreversible-cipher SetUserPasswd@123
    
    Info: A new user is added.  
    [*HUAWEI-aaa]local-user client001 service-type ssh
    [*HUAWEI-aaa]local-user client001 level 3
    [*HUAWEI-aaa]commit
    [~HUAWEI-aaa]q
    

    配置ssh服务器端的加密算法

    [~HUAWEI]ssh server cipher 3des_cbc aes128_cbc aes128_ctr aes256_cbc aes256_ctr 
    arcfour128 arcfour256 blowfish_cbc des_cbc 
    Warning: Insecure encryption algorithms are enabled. Disabling them is recommend
    ed.
    

    配置ssh用户认证方式

    [*HUAWEI]ssh user client001 authentication-type password
    

    配置SSH用户服务方式

    [*HUAWEI]ssh user client001 service-type snetconf
    

    此项配置与传统的ssh用户配置区别不大,只有在service-type处指定为snetconf。

    使能NETCONF功能

    [*HUAWEI]snetconf server enable 
    Info: Succeeded in starting the SNETCONF server on SSH port 22.
    [*HUAWEI]commit
    

    登录到NETCONF Agent

    使用厂家NMS或者自己编写程序访问设备。

    检查NETCONF配置结果

    [~HUAWEI]display ssh user-information 
    
    --------------------------------------------------------------------------------
    User Name             : client001
    Authentication-Type   : password
    User-public-key-name  : 
    User-public-key-type  : -
    Sftp-directory        : 
    Service-type          : snetconf
    --------------------------------------------------------------------------------
    Total 1, 1 printed
    [~HUAWEI]dis ssh server status
    SSH Version                                : 2.0
    SSH authentication timeout (Seconds)       : 60
    SSH authentication retries (Times)         : 3
    SSH server key generating interval (Hours) : 0
    SSH version 1.x compatibility              : Disable
    SSH server keepalive                       : Enable
    SFTP IPv4 server                           : Disable
    SFTP IPv6 server                           : Disable
    STELNET IPv4 server                        : Disable
    STELNET IPv6 server                        : Disable
    SNETCONF IPv4 server                       : Enable
    SNETCONF IPv6 server                       : Enable
    SNETCONF IPv4 server port(830)             : Disable
    SNETCONF IPv6 server port(830)             : Disable
    SCP IPv4 server                            : Disable
    SCP IPv6 server                            : Disable
    SSH server DES                             : Enable
    SSH IPv4 server port                       : 22
    SSH IPv6 server port                       : 22
    SSH server source address                  : 0.0.0.0
    SSH ipv6 server source address             : 0::0
    SSH ipv6 server source vpnName             : 
    ACL name                                   : 
    ACL number                                 : 
    ACL6 name                                  : 
    ACL6 number                                : 
    SSH server ip-block                        : Enable
    [~HUAWEI]dis netconf cap    
    [~HUAWEI]dis netconf capability 
    --------------------------------------------------
    Capability                                        
    --------------------------------------------------
    urn:ietf:params:netconf:base:1.0                  
    urn:ietf:params:netconf:base:1.1                  
    urn:ietf:params:netconf:capability:writable-running:1.0
    urn:ietf:params:netconf:capability:candidate:1.0  
    urn:ietf:params:netconf:capability:confirmed-commit:1.0
    urn:ietf:params:netconf:capability:confirmed-commit:1.1
    urn:ietf:params:netconf:capability:rollback-on-error:1.0
    urn:ietf:params:netconf:capability:validate:1.0   
    urn:ietf:params:netconf:capability:validate:1.1   
    urn:ietf:params:netconf:capability:startup:1.0    
    urn:ietf:params:netconf:capability:url:1.0?scheme=file,ftp,sftp
    urn:ietf:params:netconf:capability:xpath:1.0      
    urn:ietf:params:netconf:capability:notification:1.0
    urn:ietf:params:netconf:capability:interleave:1.0 
    urn:ietf:params:netconf:capability:with-defaults:1.0?basic-mode=report-all&also-
    supported=report-all-tagged,trim
    urn:ietf:params:netconf:capability:yang-library:1.0?revision=2016-06-21&module-s
    et-id=4124716497
    urn:ietf:params:netconf:capability:notification:2.0
    http://www.huawei.com/netconf/capability/sync/1.0 
    http://www.huawei.com/netconf/capability/sync/1.1 
    http://www.huawei.com/netconf/capability/sync/1.2 
    http://www.huawei.com/netconf/capability/sync/1.3 
    http://www.huawei.com/netconf/capability/exchange/1.0
    http://www.huawei.com/netconf/capability/exchange/1.2
    http://www.huawei.com/netconf/capability/active/1.0
    http://www.huawei.com/netconf/capability/action/1.0
    http://www.huawei.com/netconf/capability/discard-commit/1.0
    http://www.huawei.com/netconf/capability/execute-cli/1.0
    http://www.huawei.com/netconf/capability/update/1.0
    http://www.huawei.com/netconf/capability/commit-description/1.0
    http://www.huawei.com/netconf/capability/sync-config/1.0
    http://www.huawei.com/netconf/capability/sync-config/1.1
    http://www.huawei.com/netconf/capability/schema/1.0
    --------------------------------------------------
    

    相关文章

      网友评论

          本文标题:如何配置NETCONF(设备侧)

          本文链接:https://www.haomeiwen.com/subject/mlwhnqtx.html