最近在做一个录音插件,要求实时获取PCMBuffer,分析buffer ,并且同时转换成wav 文件
设置录音相关信息
[[AVAudioSession sharedInstance] setCategory:AVAudioSessionCategoryRecord error:nil];
[[AVAudioSession sharedInstance] setActive:YES error:nil];
AudioStreamBasicDescription streamDes;
// 采样率
streamDes.mSampleRate = sampleRate;
// PCM 格式
streamDes.mFormatID = kAudioFormatLinearPCM;
streamDes.mFormatFlags = kLinearPCMFormatFlagIsSignedInteger | kLinearPCMFormatFlagIsPacked;
// 1:单声道；2:立体声
streamDes.mChannelsPerFrame = nChannel;
// 语音每采样点占用位数
streamDes.mBitsPerChannel = 16;
//每桢的bytes数
streamDes.mBytesPerFrame = (streamDes.mBitsPerChannel / 8) * streamDes.mChannelsPerFrame;
//每个数据包下的桢数，即每个数据包里面有多少桢
streamDes.mFramesPerPacket = 1;
//每个数据包的bytes总数，每桢的bytes数*每个数据包的桢数
streamDes.mBytesPerPacket = streamDes.mBytesPerFrame * streamDes.mFramesPerPacket;
输出
AudioQueueNewInput(&streamDes, InputCallback,(__bridge void * _Nullable)(self), nil, nil, 0, &recordQueue);
for (int i = 0; i < QUEUE_BUFFER_SIZE; i++) {
AudioQueueAllocateBuffer(recordQueue, buffersize * 2, rBuffer+i);
AudioQueueEnqueueBuffer(recordQueue, rBuffer[i], 0, nil);
}
启动录音
AudioQueueStart(recordQueue, 0);
拿到BUffer回调
void InputCallback(
void * __nullable inUserData,
AudioQueueRef inAQ,
AudioQueueBufferRef inBuffer,
const AudioTimeStamp * inStartTime,
UInt32 inNumberPacketDescriptions,
const AudioStreamPacketDescription * __nullable inPacketDescs)
{
Recorder * recorder = (__bridge Recorder*)(inUserData);
//统计buffer数量
recorder-> bufferIndex ++;
//写入WAV
if (recorder->isToWAV) {
dispatch_queue_t queue = dispatch_queue_create("WAVQueue", DISPATCH_QUEUE_SERIAL);
dispatch_sync(queue, ^{
[recorder PCMtoWAV:inBuffer IONumPackets:inNumberPacketDescriptions tag:recorder->bufferIndex];
NSLog(@"Towav%@ ",[NSThread currentThread]);
});
}
//抛出Buffer 进行测试
if (recorder->isPictchDetector){
dispatch_queue_t queue = dispatch_queue_create("PictchQueue", DISPATCH_QUEUE_SERIAL);
dispatch_sync(queue, ^{
[recorder pictchDetector:inBuffer->mAudioData tag:recorder->bufferIndex];
});
}
NSLog(@"InputCallback %d",recorder-> bufferIndex);
AudioQueueEnqueueBuffer(inAQ, inBuffer, 0, nil);
}
//pcm 转 Wav
wav 就是在PCM的基础上加上对应的文件头 本编的重点在于 根据动态来的BUffer 实时拼接在File尾部 同时修改 wav 的文件头
fseek 用来移动file的光标 fwrite 用来在对应的光标位置写入对应的数据
WavFile = fopen([fileName cStringUsingEncoding:1], "wb");
- (void)PCMtoWAV:(AudioQueueBufferRef)buffer IONumPackets:(UInt32)ionumpackets tag:(NSInteger)tag{
wavDatalen += ionumpackets * 2;
//wav头data
NSData * data = [self GetWavheadData:wavDatalen+80 totalDataLen:wavDatalen longSampleRate:sampleRate channels:nChannel byteRate:byteRate];
//写入头文件 光标移至头部
fseek(WavFile, 0, 0);
fwrite([data bytes], 44 * sizeof(Byte), 1, WavFile);
//写入Pcm data 光标移至尾部
fseek(WavFile, 0, 2);
fwrite(buffer->mAudioData, ionumpackets * sizeof(Byte), 2, WavFile);
}
拼接的wav头文件 重点在于传入自己录音的配置参数与对应的data长度 生成头文件
- (NSData*)GetWavheadData:(NSInteger)totalAudioLen totalDataLen:(NSInteger)totalDataLen longSampleRate:(NSInteger)longSampleRate channels:(NSInteger)channels byteRate:(NSInteger)byteRate{
Byte header[44];
//4byte,资源交换文件标志:RIFF
header[0] = 'R'; // RIFF/WAVE header
header[1] = 'I';
header[2] = 'F';
header[3] = 'F';
//4byte,从下个地址到文件结尾的总字节数
header[4] = (Byte) (totalDataLen & 0xff); //file-size (equals file-size - 8)
header[5] = (Byte) ((totalDataLen >> 8) & 0xff);
header[6] = (Byte) ((totalDataLen >> 16) & 0xff);
header[7] = (Byte) ((totalDataLen >> 24) & 0xff);
//4byte,wav文件标志:WAVE
header[8] = 'W'; // Mark it as type "WAVE"
header[9] = 'A';
header[10] = 'V';
header[11] = 'E';
//4byte,波形文件标志:FMT(最后一位空格符)
header[12] = 'f'; // Mark the format section 'fmt ' chunk
header[13] = 'm';
header[14] = 't';
header[15] = ' ';
//4byte,音频属性
header[16] = 16; // 4 bytes: size of 'fmt ' chunk, Length of format data. Always 16
header[17] = 0;
header[18] = 0;
header[19] = 0;
//2byte,格式种类(1-线性pcm-WAVE_FORMAT_PCM,WAVEFORMAT_ADPCM)
header[20] = 1; // format = 1 ,Wave type PCM
header[21] = 0;
//2byte,通道数
header[22] = (Byte) channels; // channels
header[23] = 0;
//4byte,采样率
header[24] = (Byte) (longSampleRate & 0xff);
header[25] = (Byte) ((longSampleRate >> 8) & 0xff);
header[26] = (Byte) ((longSampleRate >> 16) & 0xff);
header[27] = (Byte) ((longSampleRate >> 24) & 0xff);
//4byte 传输速率,Byte率=采样频率*音频通道数*每次采样得到的样本位数/8，00005622H，也就是22050Byte/s=11025*1*16/8。
header[28] = (Byte) (byteRate & 0xff);
header[29] = (Byte) ((byteRate >> 8) & 0xff);
header[30] = (Byte) ((byteRate >> 16) & 0xff);
header[31] = (Byte) ((byteRate >> 24) & 0xff);
//2byte 一个采样多声道数据块大小,块对齐=通道数*每次采样得到的样本位数/8，0002H，也就是2=1*16/8
header[32] = (Byte) (channels * 16 / 8);
header[33] = 0;
//2byte,采样精度-PCM位宽
header[34] = 16; // bits per sample
header[35] = 0;
//4byte,数据标志:data
header[36] = 'd'; //"data" marker
header[37] = 'a';
header[38] = 't';
header[39] = 'a';
//4byte,从下个地址到文件结尾的总字节数，即除了wav header以外的pcm data length（纯音频数据）
header[40] = (Byte) (totalAudioLen & 0xff); //data-size (equals file-size - 44).
header[41] = (Byte) ((totalAudioLen >> 8) & 0xff);
header[42] = (Byte) ((totalAudioLen >> 16) & 0xff);
header[43] = (Byte) ((totalAudioLen >> 24) & 0xff);
return [[NSData alloc] initWithBytes:header length:44];;
}
网友评论