美文网首页
Warn: stm32 no flash bank found

Warn: stm32 no flash bank found

作者: T_K_233 | 来源:发表于2019-03-31 09:55 被阅读0次

    修改 STM32F103C8Tx_FLASH.ld 文件

    
    
    /*
    ******************************************************************************
    **
    
    **  File        : LinkerScript.ld
    **
    **  Author      : Auto-generated by Ac6 System Workbench
    **
    **  Abstract    : Linker script for STM32F103C8Tx series
    **                64Kbytes FLASH and 20Kbytes RAM
    **
    **                Set heap size, stack size and stack location according
    **                to application requirements.
    **
    **                Set memory bank area and size if external memory is used.
    **
    **  Target      : STMicroelectronics STM32
    **
    **  Distribution: The file is distributed ��as is,�� without any warranty
    **                of any kind.
    **
    *****************************************************************************
    ** @attention
    **
    ** <h2><center>&copy; COPYRIGHT(c) 2014 Ac6</center></h2>
    **
    ** Redistribution and use in source and binary forms, with or without modification,
    ** are permitted provided that the following conditions are met:
    **   1. Redistributions of source code must retain the above copyright notice,
    **      this list of conditions and the following disclaimer.
    **   2. Redistributions in binary form must reproduce the above copyright notice,
    **      this list of conditions and the following disclaimer in the documentation
    **      and/or other materials provided with the distribution.
    **   3. Neither the name of Ac6 nor the names of its contributors
    **      may be used to endorse or promote products derived from this software
    **      without specific prior written permission.
    **
    ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
    ** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
    ** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
    ** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
    ** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
    ** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
    ** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
    ** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
    ** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
    ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
    **
    *****************************************************************************
    */
    
    /* Entry Point */
    ENTRY(Reset_Handler)
    
    /* Highest address of the user mode stack */
    _estack = 0x20005000;    /* end of RAM */
    /* Generate a link error if heap and stack don't fit into RAM */
    _Min_Heap_Size = 0x200;      /* required amount of heap  */
    _Min_Stack_Size = 0x400; /* required amount of stack */
    
    /* Specify the memory areas */
    MEMORY
    {
    RAM (xrw)      : ORIGIN = 0x20000000, LENGTH = 20K
    FLASH (rx)      : ORIGIN = 0x8000000, LENGTH = 64K
    }
    
    /* Define output sections */
    SECTIONS
    {
      /* The startup code goes first into FLASH */
      .isr_vector :
      {
        . = ALIGN(4);
        KEEP(*(.isr_vector)) /* Startup code */
        . = ALIGN(4);
      } >FLASH
    
      /* The program code and other data goes into FLASH */
      .text :
      {
        . = ALIGN(4);
        *(.text)           /* .text sections (code) */
        *(.text*)          /* .text* sections (code) */
        *(.glue_7)         /* glue arm to thumb code */
        *(.glue_7t)        /* glue thumb to arm code */
        *(.eh_frame)
    
        KEEP (*(.init))
        KEEP (*(.fini))
    
        . = ALIGN(4);
        _etext = .;        /* define a global symbols at end of code */
      } >FLASH
    
      /* Constant data goes into FLASH */
      .rodata :
      {
        . = ALIGN(4);
        *(.rodata)         /* .rodata sections (constants, strings, etc.) */
        *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
        . = ALIGN(4);
      } >FLASH
    
      .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
      .ARM : {
        __exidx_start = .;
        *(.ARM.exidx*)
        __exidx_end = .;
      } >FLASH
    
      .preinit_array     :
      {
        PROVIDE_HIDDEN (__preinit_array_start = .);
        KEEP (*(.preinit_array*))
        PROVIDE_HIDDEN (__preinit_array_end = .);
      } >FLASH
      .init_array :
      {
        PROVIDE_HIDDEN (__init_array_start = .);
        KEEP (*(SORT(.init_array.*)))
        KEEP (*(.init_array*))
        PROVIDE_HIDDEN (__init_array_end = .);
      } >FLASH
      .fini_array :
      {
        PROVIDE_HIDDEN (__fini_array_start = .);
        KEEP (*(SORT(.fini_array.*)))
        KEEP (*(.fini_array*))
        PROVIDE_HIDDEN (__fini_array_end = .);
      } >FLASH
    
      /* used by the startup to initialize data */
      _sidata = LOADADDR(.data);
    
      /* Initialized data sections goes into RAM, load LMA copy after code */
      .data : 
      {
        . = ALIGN(4);
        _sdata = .;        /* create a global symbol at data start */
        *(.data)           /* .data sections */
        *(.data*)          /* .data* sections */
    
        . = ALIGN(4);
        _edata = .;        /* define a global symbol at data end */
      } >RAM AT> FLASH
    
      
      /* Uninitialized data section */
      . = ALIGN(4);
      .bss :
      {
        /* This is used by the startup in order to initialize the .bss secion */
        _sbss = .;         /* define a global symbol at bss start */
        __bss_start__ = _sbss;
        *(.bss)
        *(.bss*)
        *(COMMON)
    
        . = ALIGN(4);
        _ebss = .;         /* define a global symbol at bss end */
        __bss_end__ = _ebss;
      } >RAM
    
      /* User_heap_stack section, used to check that there is enough RAM left */
      ._user_heap_stack :
      {
        . = ALIGN(8);
        PROVIDE ( end = . );
        PROVIDE ( _end = . );
        . = . + _Min_Heap_Size;
        . = . + _Min_Stack_Size;
        . = ALIGN(8);
      } >RAM
    
      
    
      /* Remove information from the standard libraries */
      /DISCARD/ :
      {
        libc.a ( * )
        libm.a ( * )
        libgcc.a ( * )
      }
    
      .ARM.attributes 0 : { *(.ARM.attributes) }
    }
    

    相关文章

      网友评论

          本文标题:Warn: stm32 no flash bank found

          本文链接:https://www.haomeiwen.com/subject/qirybqtx.html