nice_agent_set_remote_candidates分析
收到trickle后解析candidates,调用nice_agent_set_remote_candidates（）然后调用 _set_remote_candidates_locked（）
static int
_set_remote_candidates_locked (NiceAgent *agent, Stream *stream,
Component *component, const GSList *candidates)
{
const GSList *i;
int added = 0;
for (i = candidates; i && added >= 0; i = i->next) {
NiceCandidate *d = (NiceCandidate*) i->data;
if (nice_address_is_valid (&d->addr) == TRUE) {
gboolean res =
priv_add_remote_candidate (agent,
stream->id,
component->id,
d->type,
&d->addr,
&d->base_addr,
d->transport,
d->priority,
d->username,
d->password,
d->foundation);
if (res)
++added;
}
}
conn_check_remote_candidates_set(agent);
if (added > 0) {
gboolean res = conn_check_schedule_next (agent);
if (res != TRUE)
nice_debug ("Agent %p : Warning: unable to schedule any conn checks!", agent);
}
return added;
}
可以看出该函数先是遍历调用priv_add_remote_candidate（），我们先探究priv_add_remote_candidate函数。
static gboolean priv_add_remote_candidate (
NiceAgent *agent,
guint stream_id,
guint component_id,
NiceCandidateType type,
const NiceAddress *addr,
const NiceAddress *base_addr,
NiceCandidateTransport transport,
guint32 priority,
const gchar *username,
const gchar *password,
const gchar *foundation)
{
Component *component;
NiceCandidate *candidate;
if (!agent_find_component (agent, stream_id, component_id, NULL, &component))
return FALSE;
/* step: check whether the candidate already exists */
candidate = component_find_remote_candidate(component, addr, transport);
if (candidate) {
if (nice_debug_is_enabled ()) {
gchar tmpbuf[INET6_ADDRSTRLEN];
nice_address_to_string (addr, tmpbuf);
nice_debug ("Agent %p : Updating existing remote candidate with addr [%s]:%u"
" for s%d/c%d. U/P '%s'/'%s' prio: %u", agent, tmpbuf,
nice_address_get_port (addr), stream_id, component_id,
username, password, priority);
}
/* case 1: an existing candidate, update the attributes */
candidate->type = type;
if (base_addr)
candidate->base_addr = *base_addr;
candidate->priority = priority;
if (foundation)
g_strlcpy(candidate->foundation, foundation,
NICE_CANDIDATE_MAX_FOUNDATION);
/* note: username and password must remain the same during
* a session; see sect 9.1.2 in ICE ID-19 */
/* note: however, the user/pass in ID-19 is global, if the user/pass
* are set in the candidate here, it means they need to be updated...
* this is essential to overcome a race condition where we might receive
* a valid binding request from a valid candidate that wasn't yet added to
* our list of candidates.. this 'update' will make the peer-rflx a
* server-rflx/host candidate again and restore that user/pass it needed
* to have in the first place */
if (username) {
g_free (candidate->username);
candidate->username = g_strdup (username);
}
if (password) {
g_free (candidate->password);
candidate->password = g_strdup (password);
}
}
在以上priv_add_remote_candidate中可以看出首先判断在改component中candidate是否存在，只是根据addr和transport是否相等作为判断，如果不存在且不是PEER_REFLEXIVE地址类型，则开始添加到remote_candidates中，然后调用conn_check_add_for_candidate函数，在该函数中遍历local_candidates来调用conn_check_add_for_candidate_pair（），开始准备和所有的local_candidates进行连通性检查。
在conn_check_add_for_candidate_pair只是简单的过滤掉不需要检查的协议，并且过滤本端和对端协议族和传输协议不同的local_candidates，最后调用priv_conn_check_add_for_candidate_pair_matched（）准备匹配工作。
static void priv_conn_check_add_for_candidate_pair_matched (NiceAgent *agent,
guint stream_id, Component *component, NiceCandidate *local,
NiceCandidate *remote, NiceCheckState initial_state)
{
nice_debug ("Agent %p, Adding check pair between %s and %s", agent,
local->foundation, remote->foundation);
priv_add_new_check_pair (agent, stream_id, component, local, remote,
initial_state, FALSE);
if (component->state == NICE_COMPONENT_STATE_CONNECTED ||
component->state == NICE_COMPONENT_STATE_READY) {
agent_signal_component_state_change (agent,
stream_id,
component->id,
NICE_COMPONENT_STATE_CONNECTED);
} else {
agent_signal_component_state_change (agent,
stream_id,
component->id,
NICE_COMPONENT_STATE_CONNECTING);
}
}
在priv_conn_check_add_for_candidate_pair_matched函数中主要是做两件事情，调用priv_add_new_check_pair，然后发出agent_signal_component_state_change信号。所以重点在priv_add_new_check_pair（）中。
static void priv_add_new_check_pair (NiceAgent *agent, guint stream_id, Component *component, NiceCandidate *local, NiceCandidate *remote, NiceCheckState initial_state, gboolean use_candidate)
{
Stream *stream;
CandidateCheckPair *pair;
g_assert (local != NULL);
g_assert (remote != NULL);
// local(%s:%u)，remote(%s:%u).",
// agent, timeout,inet_ntoa( p->local->addr.s.ip4.sin_addr),ntohs(p->local->addr.s.ip4.sin_port),inet_ntoa( p->remote->addr.s.ip4.sin_addr),ntohs(p->remote->addr.s.ip4.sin_port))
stream = agent_find_stream (agent, stream_id);
pair = g_slice_new0 (CandidateCheckPair);
pair->agent = agent;
pair->stream_id = stream_id;
pair->component_id = component->id;;
pair->local = local;
pair->remote = remote;
if (remote->type == NICE_CANDIDATE_TYPE_PEER_REFLEXIVE)
pair->sockptr = (NiceSocket *) remote->sockptr;
else
pair->sockptr = (NiceSocket *) local->sockptr;
g_snprintf (pair->foundation, NICE_CANDIDATE_PAIR_MAX_FOUNDATION, "%s:%s", local->foundation, remote->foundation);
pair->priority = agent_candidate_pair_priority (agent, local, remote);
pair->state = initial_state;
nice_debug ("Agent %p : creating new pair %p state %d,local(%s:%u)，remote(%s:%u)", agent, pair, initial_state,inet_ntoa(local->addr.s.ip4.sin_addr),ntohs(local->addr.s.ip4.sin_port),inet_ntoa(remote->addr.s.ip4.sin_addr),ntohs(remote->addr.s.ip4.sin_port));
pair->nominated = use_candidate;
pair->controlling = agent->controlling_mode;
stream->conncheck_list = g_slist_insert_sorted (stream->conncheck_list, pair,
(GCompareFunc)conn_check_compare);
nice_debug ("Agent %p : added a new conncheck %p with foundation of '%s' to list %u.", agent, pair, pair->foundation, stream_id);
/* implement the hard upper limit for number of
checks (see sect 5.7.3 ICE ID-19): */
if (agent->compatibility == NICE_COMPATIBILITY_RFC5245) {
priv_limit_conn_check_list_size (stream->conncheck_list, agent->max_conn_checks);
}
}
priv_add_new_check_pair（）创建一个新的CandidateCheckPair初始化local、remote NiceCandidate等，并且根据local、remote 的priority计算CandidateCheckPair的priority，然后根据priority排序插入到conncheck_list中，最后对NICE_COMPATIBILITY_RFC5245协议有个check_list_size的限制，可以忽略。至此，完成了将一个可用的remote_candidate加入到了conncheck_list列表中（连通性测试列表），然后回到_set_remote_candidates_locked函数。
添加到conncheck_list列表后，改函数又调用了conn_check_remote_candidates_set（）做一些remote_candidates的检查，主要是针对本端发出连通性检查信息前，对端的连通性请求已经到达我们这里的情况（原文注释：This function handles the special case where answerer has sent us connectivity checks before the answer (containing candidate information),reaches us. ）.
然后当添加到conncheck_list列表的数量大于0时调用conn_check_schedule_next安排conncheck_list中的下一个检查。
/*
* Initiates the next pending connectivity check.
*
* @return TRUE if a pending check was scheduled
*/
gboolean conn_check_schedule_next (NiceAgent *agent)
{
gboolean res = priv_conn_check_unfreeze_next (agent);
nice_debug ("Agent %p : priv_conn_check_unfreeze_next returned %d", agent, res);
if (agent->discovery_unsched_items > 0)
nice_debug ("Agent %p : WARN: starting conn checks before local candidate gathering is finished.", agent);
/* step: call once imediately */
res = priv_conn_check_tick_unlocked (agent);
nice_debug ("Agent %p : priv_conn_check_tick_unlocked returned %d", agent, res);
/* step: schedule timer if not running yet */
if (res && agent->conncheck_timer_source == NULL) {
agent_timeout_add_with_context (agent, &agent->conncheck_timer_source,
"Connectivity check schedule", agent->timer_ta,
priv_conn_check_tick, agent);
}
/* step: also start the keepalive timer */
if (agent->keepalive_timer_source == NULL) {
agent_timeout_add_with_context (agent, &agent->keepalive_timer_source,
"Connectivity keepalive timeout", NICE_AGENT_TIMER_TR_DEFAULT,
priv_conn_keepalive_tick, agent);
}
nice_debug ("Agent %p : conn_check_schedule_next returning %d", agent, res);
return res;
}
我们知道在加入到连通性列表中时，pair的状态是NICE_CHECK_FROZEN状态，所以该函数首先调用了priv_conn_check_unfreeze_next函数，unfreeze一个优先级（priority）最大的pair，将该pair的状态置为NICE_CHECK_WAITING状态。
然后调用priv_conn_check_tick_unlocked（）该函数比较重要，我们先进入此函数:
/*
* Timer callback that handles initiating and managing connectivity
* checks (paced by the Ta timer).
*
* This function is designed for the g_timeout_add() interface.
*
* @return will return FALSE when no more pending timers.
*/
static gboolean priv_conn_check_tick_unlocked (NiceAgent *agent)
{
CandidateCheckPair *pair = NULL;
gboolean keep_timer_going = FALSE;
GSList *i, *j;
GTimeVal now;
/* step: process ongoing STUN transactions */
g_get_current_time (&now);
/* step: find the highest priority waiting check and send it */
for (i = agent->streams; i ; i = i->next) {
Stream *stream = i->data;
pair = priv_conn_check_find_next_waiting (stream->conncheck_list);
if (pair)
break;
}
if (pair) {
priv_conn_check_initiate (agent, pair);
keep_timer_going = TRUE;
} else {
keep_timer_going = priv_conn_check_unfreeze_next (agent);
}
for (j = agent->streams; j; j = j->next) {
Stream *stream = j->data;
gboolean res =
priv_conn_check_tick_stream (stream, agent, &now);
if (res)
keep_timer_going = res;
}
/* step: stop timer if no work left */
if (keep_timer_going != TRUE) {
nice_debug ("Agent %p : %s: stopping conncheck timer", agent, G_STRFUNC);
for (i = agent->streams; i; i = i->next) {
Stream *stream = i->data;
priv_update_check_list_failed_components (agent, stream);
for (j = stream->components; j; j = j->next) {
Component *component = j->data;
priv_update_check_list_state_for_ready (agent, stream, component);
}
}
/* Stopping the timer so destroy the source.. this will allow
the timer to be reset if we get a set_remote_candidates after this
point */
if (agent->conncheck_timer_source != NULL) {
g_source_destroy (agent->conncheck_timer_source);
g_source_unref (agent->conncheck_timer_source);
agent->conncheck_timer_source = NULL;
}
/* XXX: what to signal, is all processing now really done? */
nice_debug ("Agent %p : changing conncheck state to COMPLETED.", agent);
}
return keep_timer_going;
}
首先调用priv_conn_check_find_next_waiting（）获得一个NICE_CHECK_WAITING状态的pair，然后调用priv_conn_check_initiate（）配置状态并且发起连通性检查，也就是设置此次检查的超时时间（_NiceAgent中的timer_ta），并将状态设置为NICE_CHECK_IN_PROGRESS，最后调用conn_check_send（）发送连通性检查数据到对方开始检查，连通性检查主要是发送以下信息，
- username (for USERNAME attribute)
- password (for MESSAGE-INTEGRITY)
- priority (for PRIORITY)
- ICE-CONTROLLED/ICE-CONTROLLING (for role conflicts)
- USE-CANDIDATE (if sent by the controlling agent)
conn_check_send（）之后开始遍历stream调用priv_conn_check_tick_stream（），该函数主要是针对各个pair的状态做处理，例如超时的需要重发、销毁等。
然后根据priv_conn_check_tick_stream（）返回判断是否有没有完成conn_check的pair需要时钟继续运行。如果所有已经完成了的话则遍历stream调用priv_update_check_list_failed_components（）处理失败的components，然后在遍历成功的components，然后取消check_list中比该pair优先级小的pair，可以减少许多不必要的检查，然后消耗时钟。
至此完成了一次连通性检查的发送和状态处理。
然后回到conn_check_schedule_next（）函数。
完成发送处理后，判断是否需要继续运行时钟，如果需要，且时钟不存在，则开始新建时钟，priv_conn_check_tick（）为时钟处理函数，一般只有第一次会出现。然后如果keepalive_timer_source时钟没有启动的话也启动，
至此新加入remote_candidates过程完成。
网友评论