NBU5230升级Bios Firmware

故障：

nbu5230.Support> Test Software

Running Validation tests on Master Appliance nbu5230.

    Checking whether serial number is present ...                                  [OK]

    Checking whether installation is successful ...                                  [OK]

    Checking whether critical kernel drivers exist and can work ...         [OK]

    Checking whether SSH is enabled ...                                [OK]

    Checking whether hostname is set ...                                [OK]

    Checking whether IP address is set ...                              [OK]

    Checking whether appliance user accounts exist ...                [OK]

    Checking whether required packages are installed ...              [OK]

    Checking whether BIOS firmware is compatible with the software ... [WARNING]

    Checking whether registration information is properly set ...      [WARNING]

    Checking whether NetBackup is configured and running ...          [OK]

    Checking whether storage units and diskpools have been created ... [OK]

    Checking whether Web Server is configured and running ...          [OK]

    Checking test backup operations ...                                [OK]

    Checking test restore operations ...                              [OK]

    Expiring test backup images and deleting test policy ...          [OK]

Completed running tests on the appliance.

    SELF TEST RESULT :                                                [PASS]

- [Warning] The installed version of the BIOS firmware is not correct. Contact your administrator to update the BIOS firmware.

- [Warning] The appliance registration information is incomplete. Update the registration information and make sure that all required fields are completed.

解决方案：

1.更新S2600GZ_BIOS02060005_ME020107328_BMC0127r10527_FRUSDR113_Veritas.zip安装包，更新方法如下

升级Bios Firmware

1.解压

nbu5230:/home/maintenance # unzip S2600GZ_BIOS02060005_ME020107328_BMC0127r10527_FRUSDR113_Veritas -d /tmp/

2.进入相应路径

nbu5230:/home/maintenance # cd /usr/bin/flashupdt

3.安装安装命令

nbu5230:/usr/bin/flashupdt # ./flashupdt -u /tmp/S2600GZ_BIOS02060005_ME020107328_BMC0127r10527_FRUSDR113_Veritas/flashupdt_new.cfg

2.替换配置文件/opt/NBUAppliance/scripts/self_test.conf，将原有的 self_test.conf 文件进行备份，可以修改一个名字为 self_test.conf.bak

3.将附件中的self_test.conf 传到目录：/opt/NBUAppliance/scripts/（附件在百度网盘）

# /usr/bin/flashupdt/flashupdt -i

4.对比附件与配置文件的差别，或者参考附件直接修改原配置文件

nbu5230:/opt/NBUAppliance/scripts # diff self_test.conf self_test.conf.bak

92,93c92,93

< BIOS Version=SE5C600.86B.02.06.0005

< BMC Firmware Version=1.27.10527

---

> BIOS Version=SE5C600.86B.02.05.0004

> BMC Firmware Version=1.23.7783

5.刷新环境变量，告警消失