gitlab的安装

首先在网上下载好任意版本gitlab的rpm包
推荐下面的地址：
https://mirrors.tuna.tsinghua.edu.cn/gitlab-ce/yum/el7/gitlab-ce-8.8.5-ce.1.el7.x86_64.rpm

[root@linux-node1 ~]# rz -E 
rz waiting to receive. 
[root@linux-node1 ~]# ls 
anaconda-ks.cfg gitlab-ce-8.8.5-ce.1.el7.x86_64.rpm 
[root@linux-node1 ~]# rpm -ivh gitlab-ce-8.8.5-ce.1.el7.x86_64.rpm

安装

Preparing... ################################# [100%] 
Updating / installing... 
1:gitlab-ce-8.8.5-ce.1.el7 ################################# [100%] 
gitlab: Thank you for installing GitLab! 
gitlab: To configure and start GitLab, RUN THE FOLLOWING COMMAND: 
sudo gitlab-ctl reconfigure #配置并启动gitlab 
gitlab: GitLab should be reachable at http://linux-node1 默认的访问地址 
gitlab: Otherwise configure GitLab for your system by editing /etc/gitlab/gitlab.rb file #gitlab的配置文件，修改之后需要重新gitlab-ctl reconfigure 
gitlab: And running reconfigure again. 
gitlab: 
gitlab: For a comprehensive list of configuration options please see the Omnibus GitLab readme 
gitlab: https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/README.md 
gitlab: 
It looks like GitLab has not been configured yet; skipping the upgrade script. 
[root@linux-node1 ~]# 

gitlab的配置

这里我先修改下配置文件 
vim /etc/gitlab/gitlab.rb #修改配置文件 
修改结果如下： 
[root@linux-node1 ~]# grep -n "^[a-Z]" /etc/gitlab/gitlab.rb 
11:external_url 'http://192.168.56.11' 
[root@linux-node1 ~]# gitlab-ctl reconfigure #配置并启动gitlab 
打开浏览器输入http://192.168.56.11 #192.168.56.11我的本机ip 

image

第一次登录要求设置root密码 
登录成功之后，是这样的 

image

gitlab的汉化：

[root@linux-node1 ~]# rz 
[root@linux-node1 ~]# ls 
anaconda-ks.cfg gitlab-ce-8.8.5-ce.1.el7.x86_64.rpm gitlabhq.tar.gz 
[root@linux-node1 ~]# tar xf gitlabhq.tar.gz 
[root@linux-node1 ~]# ls 
anaconda-ks.cfg gitlab-ce-8.8.5-ce.1.el7.x86_64.rpm gitlabhqgitlabhq.tar.gz 

关于这个也可以直接git clone git clone https://github.com/larryli/gitlabhq.git

[root@linux-node1 ~]# cp -r /opt/gitlab/embedded/service/gitlab-rails{,.ori} 
[root@linux-node1 ~]# gitlab-ctl stop 
ok: down: gitlab-workhorse: 1s, normally up 
ok: down: logrotate: 0s, normally up 
ok: down: nginx: 0s, normally up 
ok: down: postgresql: 1s, normally up 
ok: down: redis: 0s, normally up 
ok: down: sidekiq: 0s, normally up 
ok: down: unicorn: 0s, normally up 
[root@linux-node1 ~]# \cp -rf /root/gitlabhq/* /opt/gitlab/embedded/service/gitlab-rails/ 
cp: cannot overwrite non-directory '/opt/gitlab/embedded/service/gitlab-rails/log' with directory '/root/gitlabhq/log' 
cp: cannot overwrite non-directory '/opt/gitlab/embedded/service/gitlab-rails/tmp' with directory '/root/gitlabhq/tmp' 

这里的错误，忽略，因为之前已经设置gitlab的root密码了

[root@linux-node1 ~]# gitlab-ctl start 
ok: run: gitlab-workhorse: (pid 25910) 0s 
ok: run: logrotate: (pid 25914) 0s 
ok: run: nginx: (pid 25920) 1s 
ok: run: postgresql: (pid 25925) 0s 
ok: run: redis: (pid 25933) 1s 
ok: run: sidekiq: (pid 25937) 0s 
ok: run: unicorn: (pid 25941) 0s 
汉化完成之后的效果 

image

注意事项

汉化之后，不要进行版本升级，很容易出现502！切记！还有生产环境中，尽量用域名，迁移方便